How To Replace Infiniti G35 Starter
HTML-код
- Опубликовано: 10 фев 2016
- In this video I show how to replace a starter on a 2003 Infiniti G35. This procedure is applicable to any vq35de that is installed in a rwd vehicle. Let me know if you guys have any questions. Thanks For Watching!
Support my channel by becoming a member using this link: / @shoplifetv
My Amazon Store: www.amazon.com/shop/shoplifetv
Buy My Merchandise: www.shoplifetv.com
Ask me a question: www.shoplifetv.com
Request a Shop Appointment: www.shoplifetv.com
Instagram: @ShopLifeTV
/ shoplifetv
My vlog channel: / shoplifevlogs
RUclips Business Inquires: Email me amotorwerks@gmail.com
Disclaimer: Due to factors beyond the control of ShopLifeTV, I cannot guarantee against improper use or unauthorized modifications of this information. ShopLifeTV assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ShopLifeTV recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ShopLifeTV, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ShopLifeTV. Disclaimer: The product links provided are often associated with an affiliate. When using any of the affiliate links I may get compensated for any products purchased using the link. This compensation does not affect my views on the product. Авто/Мото
This was literally the easiest starter I have ever done. About 10-15 minutes tops.
you guys who make these clear and easy to follow videos are life savers. I thought this would be a big task but looks really easy. Thanks!
Thanks for the video. I like how you described what need to be removed.
One constructive comment. Next time, please run the video at normal speed when you remove and put in the main component, such as the starter in this clip. Sometimes, removing the main component is challenge due to specific angle to pull it it out and the same thing with when you put it in. Fast forward on the bolts and other things is good though.
Thanks for the video. I'm my wife's hero for fixing her car
Full of information from start to finish, thank you. subbed
Looks way simpler than I thought. Thank you.
My brotha thank you so much for your video I have both an 02 bmw 330i & an 03 Infiniti g35 and you be saving my damn life with these car videos ! I do self mechanical work only
Great video. TY very much for sharing. Had to replace the starter in ours tonight in a grocery store parking lot. Could not have been easier!
Nicely done ✔ Good video, good clarity and camera position. Thanks!
If you hear the starter just spinning when you try to turn it on its the starter bendix which means you need a new starter. If you try hitting it its not gonna start it but you still need a new starter. If you hear it click and it doesn't crank its your starter as well. But with this problem you can hit it and it will start the car
Thanks Brother, I always check before I decide to DIY. Easy fix!
Outstanding, great demo.
yes do more on vq35 engines bro
to add to this vid. on the all wheel drive models, the starter is located on the driver's side of the vehicle. jack up the car and pull the front wheel and you now have access to the starter!
Great how to video sir. Much appreciated!
Thanks for the simplicity you're appreciated.
Extremely helpful best angles on yt
Good vid.. took some relief off me. Thank you
You are awesome. This just helped me out right now
Thanks man glad it helped!
Great video. Thanks
nice job good work thanks!
Thanks for the video
great video
Hi Jason... I recently replaced a bendix on a starter for my e46 318i. However, when i tried to start the car, the key could only go as far as to turn the dash on, no cranking. but when i connect the starter directly to the battery with the key on ON position, the car starts. is there a way around this issue so i can start the car with the key?
Nice DIY
Great vid
thanks!
Thanks dude
That g35 sounded good on that start up.
I'm working on my 2003 fx-35 and my starter is located on driver side. Does that seem right to you? I can't find anything online to confirm it.
Thank you so much
Does the washer go on before the positive connector?
THANK YOU!
Great video, I wish you would have recorded your way to the starter, I'm just lazy though LOL
I just went from underneath the front of the car. Its pretty straightforward haha. Thanks for watching man!
What is the difference between starter manual transmision of automatic ?
Hello I have a question about this. I am having a problem with my starter. What is ths wire that connects to the starter . Not the power wire from the alternator but the other one. What is that wire?? Please help!!
can the starter from a automatic transmission fit a manual?
I followed this and removed all 3 bolts but the starter won't come out. I tried to wiggle and tap on it but still stuck there like there is another bolts that is holding it. Any suggestion?
Dude replaced starter said he had take off axle n then it drove funny and wheel was actin up. Is that right? Now car is wrecked cuz wheel was actin up. Is it possible he messed stuff up? Did he need mess wit axle to change starter
Do you have experience in adding a blutooth or aux cord connection for a 2006 m35 with no satellite connections?
Feel free to email me shavperu@gmail.com or text me 9493511913
So how long did it all take and what was the price of the starter?
Is Skyline Starter Going to Infinity? coupe 2003
Is the same for a 2003 fx35
Where the starter relay is located
Good video man. So do they reimburse you for the core fee after you return it ?
Also, do you know where to start in replacing starter for 2008 G37s coupe. Mine is going bad. I appreciate the help.
Did it sound like a grinding sound when you would crank it? Mine turns on rarely but does very much want to turn on sometimes. But I get grinding like sound. Is that what this one sounded like?
@ShopLifeTV
Easy as hell nice how did the starter cost u
thank u sir
Did you have to clear anything out to get to the starter? Or is it just an easy access from under the car?
Easy access from under the car
hey there. Nice do it yourself. one question i have in mind is
How long should it take to replace it?
Less than 30 minutes if it's your first time. Thanks!
Do a video for a 2010 Infiniti G37 Coupe for the starter?
I have a g35
04 won't crank , only battery turns on .... its it cause of starter ?
what are some test you can do, to know starter is the issue?
@Harry Caldwell yeah I replaced mine took me about 30 mins. Probably the easiest starter I’ve ever replaced lol
where is the starter location on a 2004 G35 x awd...And can i use a a regualr g35 starter on my G35x
Nathaniel Malik James the X starter is located on the driver's side of the engine. The starter is different and not interchangeable due to its orientation on the engine. So be sure you ask for or order the starter for the x model. It is basically the same procedure for removal and replacement.
What tools do u need?
are you on garage jorunal or stanceworks? I remember reading about you awhile ago, link would be helpful ;)
+Kofi Hey I had a thread on stanceworks about my first s54 swap two years ago. I never updated it haha. I also have a thread on e46fanatics which I need to update too.
What about the 2003 fx45
I don't have that gap to take it out smh I had to take out a back plate to get it out I did not have enough space I have 03.
Much respect, great video 💪👍
What about awd
NICE VIDEO! But there was no reason for you to speed up the main part of the removal/installation of the starter.....I had to slow the playback speed way down just to see.
my starter is stuck in the flywheel. have everything disconnected too
hey, i have 2013 g37x sedan, tried starting today and all it does just makes on click and won't start.. Is that a starter? Battery terminals and the battery is fine. Any ideas?
More than likely the starter. Have you tried any other keys? Jump starting?
+ShopLifeTV
There is no key, push button start:(
I'll try tapping the starter, looks like it might not be too difficult to take out, and have it tested
Its the starter... :( I've loosened the bolts but there is no way to get it out... Any hints would help...
I have a 350Z and I'm doing it right now and I got one question. Did you take th subframe off?
No I did not.
did this work? my 2003 350z wont start and i just replaced the battery so i know that isnt the problem, it wont even click or try to turn over but the lights all work
Colby Battershell bro exactly same here . Just got a replaced engine, literally just got a new battery. Do you think it’s the starter?
I need to do the water pump
Replaced mines today and now I'm not getting a rattling sound on start up
Need advice . When I start my car it literally take like 3 seconds . U can feel it shaking and then when I start it it shakes . Just got a new engine and battery so I think the starter is what it has to be
nice dude go pack!
*Salute*
Do more G35 vids
Had that replaced today but the mechanic charged me 350 including 200 labor. Problem is that alignment was completely off when I drove it, and 2 lights came on VLC and SlIp. Don't K now what that mechanic has been touching
Gentleman Hack probably got scammed by the mechanic, that price sounds horrendous
Thanks but take it easy with the speed lol tryna see how is taking out
Any way to hit it with a hammer without taking off the passenger wheel and jacking it up?
Use a hammer or something long that’s metal and lay on the ground lol. U dnt have to stick your whole body just a portion lol
Slow down the speed so we can see what your doing
There is an option to playback RUclips videos at slower speeds. You can do that if you need to watch him do it slower.
Ouch 😫 looked the rust must be a colder climate car.
My g35 makes like a choking noise when I start it up. Think it's the starter?
Message me a video of it on instagram @ShopLifeTV
2004 Infiniti G35 start, just come on. I change the starter and still wont say anything.
is thAt a g35 2003?
coupe?
04 sedan
that was great but the alternator doesn't look as if it will be that ez. lol
the alternator is not too bad, just more involved. I have a video on g35 belts and pulleys diys that shows most of the procedure.
I am gonna strokebout. The too bolt is frizen😢😢. I've come too far with your easy dIY to loose. Would a swivel work. These ppl give no room to work!
It was super easy to remove but FUCK I couldn’t get it back in for an hour😂😂😂 bitch was impossible but eventually I got it in. Just a reminder to those who are doing it, remove it and then take the old one to where you’re purchasing a new one, they’ll typically knock off like $40
I wanna kick something so bad because those two 14mm bolts on mine just won't budge no matter what. It's aggravating as hell.
PEOPLE, stop whining about the speed. You can slow it down the speed in the video options.
The speed is so dam fast, I could not determine what you were doing. Bad quality.
took me 1hr and a half though.
If you experience rusty bolts or other complications it could even take an entire day haha. I've had 10 min jobs turn into several hour jobs
It will take me longer than. Thanks for helping not make it an all day event. I will let you know tomorrow.
Spent too much time talking only to speed up video during the actual process.