FS2020: Velocity One Flightstick - All My Bindings & Settings: Including Mixture Control!
HTML-код
- Опубликовано: 5 июл 2024
- Here I show all my current bindings for the V1 Flightstick, including my Sensitivities and more!
Any questions about your V1 Flightstick should be directed at the TB Discord: / discord
Join the Discord (Xbox and PC Simmers welcome!)
/ discord
Join this channel to get access to perks:
/ @huddison
⌚Timestamps⌚
Introduction: (0:00)
Hat switch & Views Settings: (1:28)
Left-hand Buttons settings: (6:00)
Mixture Lever setup: (8:11)
Right-hand Buttons settings: (9:21)
Sensitivity settings: (13:01)
Flight Test with settings: (15:57)
#VelocityOneFlightStick #VelocityOneFlightstickSettings #VelocityOneFlightstickSensitivities 
Игры
![Eminem - The Death of Slim Shady [Album Trailer]](http://i.ytimg.com/vi/X0HIrS6kUYI/mqdefault.jpg)
Something that I found helpful was creating a "combo" button which you can use to make combinations with other keys. In this way you can control not only heading bugs but also altitude and VS and so much more. I had two combination buttons on my HOTAS. I'm planning to do a whole setup with this using the trim wheel in combinations with the other buttons I set to control VS, Altitude, and heading bugs. I like the mixture idea you have here.
The way you've set up the four-way hats for Pilot Position and Instrument View is genius and something I've replicated on every peripheral I set up. I think that goes all the way back to your VelocityOne yoke days over a year ago - it really works well for everything. I think that making easy workflows for masterful camera control is one of the most important pieces to enjoying MSFS.
Agreed Mike, it really does add a lot of ease generally to the flying experience.
Can you post a screenshot of the four-way hats setting for instrument views an Pilot position?
Great update, looking into this for the xbox series s.
Thanks James !
Just a little tip if you are running out of bindings😉
You can use one of the tree buttons at the bottom, next to the big XBox button, with other buttons to get extra functions.
For example, you can bind B22 (the one below the big Xbox button) with Hat1 to move your point of view
And B23 (the one just on the right of B22) with Hat1 to go to saved views
That's just an example, but actually, you can double or triple, the numbers of bindinds on this great joystick😊
Thats very intresting! Are the buttons next to the Xbox button as you mentioned the only 'Modifyer buttons'? I would love to map the RB RT of LB RT buttons like on the Xbox controller.
Same question as @slicksx45 i guess.
@@kwaliteitaccount3293 This is the same as what I suggested, but I use different buttons. You can set it up so many different ways! It's awesome.
@@kwaliteitaccount3293 Yes, actually, you can use any button as a modifier. You just have to be sure there will not be conflict within Msfs (the modifier button must not be used as a function in Msfs)
But those buttons next to the big X do have functions in MSFS .e.g. the RH one normally invokes pause which jumps you out of the flight to the options page??
@@TWOKDOK1 Yes you are right, that's why you have to unbind these buttons in the control settings first. You have to check if you want to use RH for example as a modifier, that it is not binded to any binding, like "pause" in your case.
Great review, thanks! The only other reviewers (so far) don't seem to have a clue what they're talking about but yours is the real deal. Getting mine this week! Quick question, can the four 'xbox' buttons at the base be mapped on PC? The more mappable buttons the better!
Thanks that's highly appreciated.
3 of the buttons can be remapped for sure, I'll have to check to see if the main 'X' button can be.
@@Huddison That's good news! Thanks for the reply!
Good Evening. Received the Velocity 1 for Christmas and using your video to customize it. I did notice that using Joystick POV right for next instrument view also moves the heading bug when going through the different views.
I use my left POV for those functions.
The “throttle jitters” issue I had has been solved today thanks to opinions here. “Sensitivity” should be “ calibration”, because that’s how inputs can be fixed. I was almost planning a reinstall!
Thank you for sharing. I accidentally ordered myself a christmas present for myself watching this..
Sorry for that😆
I had to make a base for it with double laminated rigid cardboard. Was sick of holding so much tension down on it with my left hand to stabilize the base. The centering tension is so strong on this stick. But thats about the only bad thing about the product. Everything else about it is fantastic.
Awesome!!! I am using a PC only. Your settings work for me!
Be sure to check my most recent video on the FS: ruclips.net/video/cer46Og1FSc/видео.html
@@Huddison I already have, thank you.
Xbox series X, no issue with saving profiles- man you scared me when your first video came out with the base LED’s not working and unable to update FW- I pre-ordered also but got lucky because when mine came the base led’s worked from first plug-in and the firmware was already updated to most recent out of the box! So glad you got your Sussed (I’m American with British Wife only reason I know that slang!)😂. So far only thing I’ve changed from default is removed Toggle cursor from B-17 and assigned toggle spoilers because need that for my favorite aircraft the Honda Jet. I do want to change the B5-B8 buttons because the default assignments pretty much useless but just need to think a little more exactly what I want to use those for. I do like your H1 right and left to control the hdg bug…think I’ll do that too…thanks and love your channel!!
Thanks Kev & glad that you have a fully functioning unit (it does seem that most have).
Thank you
Thanks!
Wow thanks! Massively appreciated :)
For the sensitivity settings... what profile are you using on the stick itself? I'm guessing standard, and then tuning in MSFS (not both) correct?
That's correct: standard on the stick itself and fine tuned in MSFS.
Another excellent product review Hudds. Like my Hotas a lot and use it with gamepad and mouse, especially when programming the Garmin. Looks like its more programmable. Any views on how it compares with Hotas on Xbox.
Coming imminently ;)
This is many levels above the Thrustmaster Hotas on Xbox! Get it, you won't be disappointed.
@@Huddison Decided to buy the Thrustmaster rudder pedals on Amazon. €40 off so will go well with Hotas, having watched your excellent video on them. Velocity can wait a while.
Huddison, one thing I've done is to use combinations of buttons for the H1. Essentially create a "shift" key with the B1, B2, etc. For example, H1 up alone will increase heading bug and H1 down will decrease it. But, B4 + H1 Up will decrease flaps, B4 + H1 down will increase flaps. This extends the usability of the H1 immensely.
That sounds ingenious.
@Huddison Thank you! I edited my post as I had mistyped my bindings. It should make better sense now.
@@slickx45 How do you edit this in Controls? The only thing i can edit is a press of a single button
@kwaliteitaccount3293 When you select to scan input, press the button combination you want and it should show in the field on the screen.
Genius bro thanks
:) You can hit the Windows key and run MF during a flight or in the menus, load the required profile.. it does not harm MSFS to do that even when flying.
Good to know ;)
Great review as always! Just got the product, so new to this. My right mouse press, used for moving view is inoperative for that function, all else ok. I find the top hats a bit awkward, especially for vatsim! Thoughts?
Nothing from the top of my head, but do ask in the TB Discord; I've a feeling they might be able to help.
Update. My wireless headset didn’t work as well. Finally it dawned on me to check pc settings. Velocity one added itself as a device and MADE IT DEFAULT! Nice!
Could I use the left Lever as "Throttle" and use the right lever for "Flaps?" Or does it have to be something different? Love the vid!
Thanks. Yes you can do that if you wish.
@@Huddison Thanks so much for the reply! I am getting this product very soon and want to get familiar with it early so I can set it up easy when it arrives:)
Can save profiles with Xbox series s fine. Have turned the sensitivity of the track pad up to max and can get the cursor to move around, but it’s not really usable.
Thanks for the info Ed. I believe the main reason for the touchpad was for Xbox users, so hope they get it sorted for the Series S soon; it's fantastic on PC.
Hi Huddison what would be your preference for the right lever? Trying to decide where I should map the mixture/RPM and flaps?
I plan to watch your video fully soon as not got the stick yet.
Thanks
I prefer the Mixture on the right lever.
@@Huddison Cool, that was my thinking, what buttons would you suggest to map flaps/rpm to? Thanks for your reply.
@@tel7625 This'll give you some idea: ruclips.net/video/cer46Og1FSc/видео.html
@huddison For button 3 ( increase flaps) did you delete any of the other mapped settings assigned to button 3?
For example one assigned to it also is toggle pushback, same goes for button one (toggle breaks) that has engine auto start, would these all conflict? Thanks
Yes I believe I did delete the default assignments for most buttons.
Thanks for the great video. My profile did save and I’m on the xbox series S. There must of been a update that fixed the issue in the video. Anyway thanks!!!!
@Huddison I got this stick today and it is my first one. it feels good but i am having a hard time setting this up for star wars squadrons . Do you have any tips or guide refreances? Cheers from across the pond. Love your channel keep up he great work!
I'm still intending to get around to setting it up for Squadrons, particularly in VR - keep an eye on my 2nd channel ;)
@@Huddison s second cannel ok ty for the reply
Highly appreciate your videos! Love the setting with the heading bug on POV Button. I will do that tonight... But I got a question. You know how there is a chrono timer on the small display of the stick? How do you make that chrono work? I cannot figure it out... tried all kinds of stuff but I am sure I am missing a setting.. any idea?
I've not really looked into that as of yet, but I shall and report back.
Press the buttons on the flightstick configurator wheel without turning it first as that will put you into the joystick menus. Right button start/pause chrono, left button reset chrono.
@@BALLOOROOM Damn! Perfect man! Thanks so much for that! Highly highly appreciated! 😊
I bought the Flight Stick today and it totally transformed my previous gamepad controller experience. I have a PPL (now out of date) but I found it almost impossible to control the aircraft (C152) with any smoothness at all. It took me most of the day to set up the FStick owing to my relative ignorance and found my flying transformed! However, there were one or two issues. I am using Xbox X and thought I would be able to control menus e.g. in controls options using the stick alone but am still having to resort to the game pad for cursor work there and for initially entering my password etc.
The FStick is, as you say, well made and feels like a quality item. However, since getting it up and running, whilst rejoicing in the much-enhanced immersion, I experienced serious authority issues after about 15 mins of flight, when the aircraft was handling like a sack of bananas. I was climbing at about 1000 feet at 65kts at the time and the controls suddenly became very sluggish and I almost couldn’t maintain straight and level flight. After a while floundering around, I used the rocker switch on the gamepad to retract the flaps ( even thought they were not showing deployed in the cockpit and the flaps slider was fully retracted). This restored manoeuvreability but it happened again after a few minutes. This seems to happen every time I repeat the flight… a bug? Is it ok to use the gamepad and FStick in combination ( former as ‘cursor’ and latter for flying? Do you have any idea what might be going on. I cancelled the flaps fully deployed detente on the RH slider because I thought that might have an impact but no joy. Any ideas?
My settings are saving OK on XBoxX
I recently purchased the Velocityone after having stability issues with the Thrustmaster HOTAS.
Overall, I’m happy enough (though I’ve completely given up trying to assign controls - I’ll stick with the default settings), but one thing that’s bugging the crap out of me, is that on landing, the breaks seem to be automatically applied. I make sure that the parking break is off, but still the plane won’t budge when I try to taxi off the runway. Any suggestions?
Check in your Assistance Options - you may have something inadvertently assigned in there.
On XBOX X, I have unmapped the touchpad because it was almost unusable and if you accidentally click on the touchpad button in flight, it can cause havoc. So axes more trouble than they’re worth. For helo, I use the touchpad button for resetting default view, (having re-mapped H2 for rotor pitch and H2 button for reset trim).
Great idea David. I'm hoping with future updates that the touchpad will be as intended in use.
@@Huddison I should have said H2 re-mapped for rotor trim (i.e. pitch + roll), sorry
All my settings are saved on my xbox series x. Live the flight stick since I am left handed.
Excellent feedback Don!
Hi Huddison..are you going do to a config/sensitivity settings for helicopters?..very much appreciate all your videos👊🏻
Thanks - I'm aiming to
I like the setting stick performance>profiles>precision without changing in-game sensitivities. 21:00 what on earth is going on 😂
Thanks for this great video full of great suggestions!!!! i have a problem in msfs2020: when i put the stick on the right side (full) and stay there; the plane ( i see the virtual yoke or stick in game) goes immediately back to center position it occurs only on the right side .....Do you have any ideas how to resolve this? i am in despair....How to calibrate it properly? i use command joy.cpl it seems ok over there.... THANKS by advance
Looking forward to this
No word unless I missed it on the trim wheel and it’s effectiveness?
Trim wheel is great in its default settings; incredible to have it on a Hotas at this price.
Kinda to add on to your thoughts about the stiffness, when I went to an a320 cockpit simulator the side stick was actually quite stiff very similar to this stick
Great feedback, thanks.
Hi, do you have a clicking kind of sound when you move the stick forward/backward/left/right? Just bought this and wondered. Maybe needs to wear in a bit?
I haven't noticed any clicking sounds with mine; yours may need breaking in.
Hi Huddison,I’m enjoying your how to videos and your latest videos regarding the Turtle Beach velocity one Flight Stick.I got one stick two week’s ago.I’m trying to set the H1 bottom for cockpit view’s but until now without success. Can you give me a hint how to do that?
Christian
I mean individual cockpit view’s
Best jumping onto Discord Christian - we can better walk you through how to do it there.
I got the same sound bug. Hope they fix it soon. I also ordered the stick. Upgrading from HOTAS, hopefully worth it.
Let us know what you think of the FS, once you have it.
@@Huddison I'll do, its says delivery 7th of December, but if I cancel the order and reorder it, its delivery 1. dec. Strange. Guess there are different batches at different locations?
@@ketle369 That is quite strange.
Hi Huddison, for the mixture left slider should I untick the reverse axis box?
It depends which way you would like Mixture setup - I keep the box ticked so that I pull my lever downwards to Lean.
@Huddison, Do you think its possible to map the speed break to one of the sliders? Im trying to work out how to do it, for the arming as well as raising and lowering them.
The airbrake? You could map toggle airbrake to one of the levers detents. Not sure it'll work on an axis, but will aim to test this.
@@Huddison yeah sorry the airbreak, I was thinking the detent for the arming and then moving lever up to apply the airbreak, I will try to have a look as well when I get some free time, which I’m limited to a lot lately! Thanks
Profiles (SEries X) most often safe correctly, weird is that sometimes the new settings work after saving, than after restarting they are gone again. I had this several
times now.
Great info, thanks for sharing.
Hi have a question, im pretty new to this, I have the Velicityone flightstick. Is it possible to set up settings and save for different aircraft, I mainly fly GA, so I can have one for say a PA28, another for a cessna 172 etc and select them from the Contols option menu.
Yes just save the various settings under different profiles in Controls Options and apply them appropriately.
Thank you for your help, your channel has been a mind of information the last few week for me. Many Thanks
I just got this stick. I like the button layout but i need to adjust the curves. PC/ Elite Dangerous where do you get this software that your using here? is this only xbox software?
The sensitivities? They are in MSFS.
@Huddison something isn't working correctly. i've updated the Firmware. I spoke with Turtle Beach. They said i need to install it on a phone or Tablet and bluetooth to it for that to work. so... on my todo list
Oscar Wilde said, "Imitation is the sincerest form of flattery that mediocrity can pay to greatness". From a mediocre newbie (on a Series X) to Huddison the Pro....THANK YOU for all your brilliant work! 🙂
With the exception of jets, helos and the newer stick-controlled jets (which have anywhere from a few to A LOT of speciality settings), do you find yourself using the stick more for taildraggers and the yoke for more advanced aircraft? My head tells me that I should be using the yoke for planes with a yoke (and thus probably more advanced controls) and the stick for simplier planes like a Stearman or a Pitts Special with less "moving parts", etc.
In your V1F yoke video, you set up a number of profiles, building from "Basic_yoke" to "Single_advanced", etc. An example of what I'm asking is your mixture assignment. You put that on the right lever but there are detents at either end that don't get used. No biggie, but if I programmed that for the prop instead (not something I'd expect in a taildragger), I'd be using the yoke instead of the stick! Do you have numerous profiles for the Flightstick? Right now, I have the Default and will use your settings to make a new profile, something like "Flightstick_Basic".(We'll tackle jets and helos later...).
Same thing with the left throttle lever; the detent at the front end is for "afterburner" if you're flying a jet but certainly NOT going to be a factor flying a simple plane with a stick. The rear detent would be, on a twin, for example, reverse thrust, again something not expected in a simplier GA plane.
Am I overthinking things here? 🙄
Cheers!
Thank you. I don't class myself as a Pro; I'm just someone who carries over a bit of experience from previous sims and a passion for settings :)
Since buying and owning the Flightstick, I've been using it in all my aircraft, 95% of the time - I really must get back to using my V1 Yoke, as it's somewhat been neglected of late.
I have several profiles for my FS: these include profiles for Helicopters, airliners and of course, GA aircraft. I'll cover these in upcoming videos.
I will also make more use of the detents as they really give a definitive 'clunk' when you employ them.
Would you recommend these bindings for new players. Got my velocity stick today I'm new to flight sim
Congrats on your new controller - yes these are a good start; also see my Overdrive settings video for this FS.
I have a Saitek throttle, but what I dislike is using the knobs in the sim to do three things: Autothrottle, Altitude, and Vertical Speed. My mapping is to use the buttons on the joystick. I have button 1 set as the Autothrottle toggle. I have button 4 set as the altitude hold. Butten 3 is lowers reference altitude, button 2 increases reference altitude. I have the left hat down set up to decrease reference air speed, and the up button set to raise reference airspeed. This makes it very easy to adjust air speed in the pattern. because I can do it with my thumb. Button 5 is set for heading toggle, and the left hat left decreases heading and right increases heading. I have button 8 set as the Vertical Speed toggle, and I have Button 7 set as the decrease VS, and button 6 increases. I was going to buy an autopilot panel but mostly because I hated using the little twist buttons in the cockpit. Now I can are the autotrottle and adjust speed easily and make my altitude and vertical speed adjustments easily .The throttle quadrant has flaps and gear but even if it did not, I could use keyboards for those functions. Having important autopilot functions on the stick really works for me.
Thanks for sharing.
Playing with it on my xbox series x I'm having odd issues. Where I chose world map, if the flightstick is plugged in and I select search with my controller, the cursor moves right down to the left bottom corner and when I come out of the search, I can't move the curser.
If I'm using the Flight one yoke, that doesn't interfere so I don't know why this flight stick is interfering. Is this happening with you on your Xbox?
Yes, I get similar oddities on my Series S, so thanks for feeding back on this.
I have notice that slightly moving the cursor with your touchpad (on the V1 FS), will let me regain full control of the cursor via the gamepad - worth a try.
@@Huddison Will give it a go
@@Choo-Choonesme Yes, it's the touchpad that interferes with the controller, hope they correct that in the future
I have the same issue, only solution was to turn off my controller and use a wireless mouse instead!
Agree with everything. I have BIG issue, right click on mouse to “look around” cockpit is not possible, but ok exterior view. Started when installed flightstick. Thanks.
Yes I also encounter that, hopefully sorted out soon.
@@Huddison thanks, good to know that I’m not nuts.
Latest news. The throttle issue is NOT the velocity, I swapped back to other stick, same problem, ie: msfs2020. I don’t fly just try to solve problems. Another interesting bit, the problem changes with aircraft.
When I was using the Hotas One, I had freelook in the cockpit using a mouse (PC). When I changed to the V1 Flightstick, that capability went away and I can’t figure out how to get it back. Any suggestion or advice would be appreciated.
You have to delete all the assignments for the right hat on the flightstick (H2), then your mouse should work ok. I hope TB patches this issue soon.
@@Huddison I did delete all assignments from the right hat (H2) and cockpit freelook using the mouse worked. I then went back to cockpit camera view and assigned Joystick R - Axis X+ to Cockpit Look Right, Joystick R - Axis X- to Cockpit Look Left, Joystick R - Axis Y+ to Cockpit Look Down, and Joystick R - Axis Y- to Cockpit Look Up. Now I have cockpit freelook using both the mouse and the right hat (H2).
How can you set both previous/next Instrument view and heading bug on Hat 1 left and right?? When I try it it conflicts.
The next & previous modes will only activate when down in the instruments. Jump on to the discord and ask for help in there with your bindings.
I've given up trying to configure this with msfs PC, particularly with PMDG. Went back to my older joystick. It's just too much trouble to get it working with virtual cockpit. Maybe I'll try it again later at some point.
What issues are you encountering? Our Discord is a great source of help in that regard.
@@Huddison I'm having issues also with PMDG 737 in MSFS 2020 on the PC. The only real issue is nosewheel steering when taxiing, not enough of a turning radius. I'd love to get it working better.
Do you fly choppers? I want to see someone who flies helicopter using this very stick.
Having trouble with trim wheel very hard to set. I have auto trim off.
Also plane slightly pulls to right with stick in the centered position.
Xbox x
Trim def needs patching on both the FS and Yoke.
I would like to control prop rpm with the lever you use to control mixture. I can’t figure out what to assign it to. Any suggestions?
Look under Controls Options/Power management and you can assign it there. Pop into the Discord if you're unsure how to.
How is the build quality compared to hotas one? Thank you
This feels more premium.
Just curious, how much different are your xbox sensitivity?
About the same
Just a wuestion but how do you stick the flightstick on the table so whenever i use it it doesnt move everywhere
You could use 3M sticky pads or screw it to your desk; I've found that I've not had to.
I have no lights on the buttons and the ring. How did you manage to get these to work. I only have a small light at the top of the stick.
In the TB Discord, check the 'Flightstick-Troublshooting' channel (bottom left): discord.gg/jqXc45Kmjb - they have a few suggestions there.
Could kind person please share what the default number is when you go into the trim settings? It has that 5 digit number with no explanation at all as to what it does. I fiddled with it but want to put it back to what it was out of the box. Cheers :)
The number showing for me on the FMD, is 32895 - I don't know if this is 'default' though.
@@Huddison that sounds about right actually. I had something similar in my head but wasn’t sure. I think you nailed it 😊 cheers!
Late reply, but I believe that number indicates the current trim wheel position. 32768 or similar would be "center" and the number should increase/decrease while you scroll. I suppose it's a visual way to verify the wheel is working consistently?
I have this Flightstick. When I use the right mouse button
to pan the camera around in cockpit view it doesn’t do anything. But it does pan around in external view. I’m stumped. I don’t like using a hat switch to move the camera around
Delete the assignments in Controls Options for the Touch Pad and your mouse should be working again.
@@Huddison thanks for taking the time to reply. I have got rid of the hat switch controls and now I have control of the cam again in the cockpit with the mouse.
Keep up with the great content!!
Hi
If you get a minute could you tell me how to map prop?
I have throttle and mixture assigned to the levers, wanted to use the right hand side buttons for the prop but no idea where ti find the correct setting to assign it.
Edit think I’ve come across it in the video here, no worries.
You've managed to solve it?
Yes thanks I mapped prop increase/decrease to buttons 5 and 6 @@Huddison
Do you know how to remap buttons on the turtle Beach velocity one Flightstick because I wanna remap B 16 because it doesn’t do anything (by the way playing flight simulator)
Just remap them via controls options.
@@Huddison I have a question how do you press the cockpit buttons inside of a plane with the Flightstick without pressing B-17?
Huddison are the sensitivity’s in different places on Xbox then? So I should do a like for like copy, but make sure I’m tweaking the correct setting? Thanks
In Sensitivities section, move the axis you want to tweak (like ailerons, Rudder etc) to see which exact sensitivity is pertains to - that's the best way to make sure.
@@Huddison yeah thanks got it just trying update it now, app on Xbox is poor, just stuck on select device and nothing happens.
@@Huddison updated in the end, as I was watching your video I notice stuff a little different like the camera assigned buttons, I have quite a few assigned as default and one of your assigned buttons I could not even find in the buttons list. (Joystick r axis x)
Perhaps the update may have changed stuff, not checked yet.
@@tel7625 I could not find joystick R either.I was just messing around and I believe the XBox equivalent is Joystick L, Axis 6 and Axis 7
@@kirk2269 yeah I just moved the stick like Huddison suggested to see what they correspond with it’s quite different on Xbox.
Do you use this joystick with helicopters, and if so, how is it ?
Upcoming.
On the off chance in msfs I messed up deleted something by mistake on default do you know how to reset the stick to revert back to factory or get that back
To reset it to its default profile in MSFS: go to Controls Options and highlight the flightstick; chose 'Open Preset Manager' and delete all the profiles.
You should be left with your 'Default' profile (which you can't delete).
What are your sensitivity settings for the flight stick.I play msfs 2020 on pc
I'll take a look the next time I fly with it (it should be in one of my other videos on the FS - check my Velocity One playlist).
Great video, just got the stick. Annoyingly some bindings don't seem to be saving, they work and then revert to the original settings despite showing the new setting in the menu (MSFS on Series X) Frustrating as everything was working perfectly.
Our Discord member should be able to help.
I shall join. Any particular channel for these type of queries?@@Huddison
I have been trying to assign Cockpit "Quickview Left 45 degrees" to the H1 POV switch (Up and Left position), but it will not work. It seems like the H1 POV sometimes comes up as Button 11/12/13/14, and other times it comes up as POV UP/Right/Down/Left. Anyway, anybody have any luck?
Our Discord might help you better with this query.
Can you also do some settings for helicopters?
I'm intending to ;)
It’s a shame they didn’t design the app to allow sharing of profiles. It would make life so much easier
Well BK the (good) idea is in the air. Great stuff.
Regarding the touchpad, I just had delivered a second hand flightstick today. I noticed immediately the touchpad is extremely insensitive to virtually unusable on my xbox S despite sensitivity at default Max setting in the stick's menu. The previous owner said he thought the touchpad was too sensitive on his PC with msfs. It seems to mirror your own findings.
Thanks for the info.
Is there any way on Xbox when you are in cursor mode looking at the flight systems to pull the trigger and have it be the on off switch?
I don't see why you can't set that up.
@@Huddison idk. I’ve tried about all of the inputs. No luck
@@ld5984 I'm no expert but I don't think you can use the "trigger" to do that. It's on an axis, so it provides a range of motion, not just a simple "on / off".
Hello. I couldn’t get the reverse on the throttle to work properly. I tried to bind the reverse toggle to the button 10. But it is bot working as intended. I want it to go to full reverse when I go to the reverse on the throttle lever. Which setting should I apply?
I've just tried this with the V1 FS and the Airbus: when you bind the detent to Toggle reverse thrust, ensure you have it set to 'On Press' (in the button biding box).
@@Huddison Thanks for the reply ☺️ Button 10 is the reverse detent. I will try your suggestion. Thanks.
@@Huddison I have tried it. It toggles the thrust to reverse. Thank you. I thought when I slide the toggle to the reverse detent, it would go to full reverse without having to set the throttle up. Just like written on the stick (Full Rev).
But couldn’t get it work at all with pmdg 787 on pc.
How do you get the velocity one flightstick in the options section for the msfs simulator. I have nothing there except for the mouse and the keyboard
Ensure you have the correct 'Input Mode' set (depending whether you're on Xbox or PC).
@Huddison Yes I got it going. What is a good tutorial for this flightstick.
I have the Xbox X and have no problems saving profiles.
Thanks Simon.
Touchpad is totally useless on Xbox Series X. I can save profiles though! Great video mate!
Thanks!
I can’t even get my touchpad to work.
Does anyone know how can i change this for a fps on xbox
Weird i dont have instrument views option and I'm following this video. It shows in Keyboard options but not Flightstick tab.
Put your Filter (lower left) to all.
@@Huddison Thanks again.
Any one know why my right hand buttons lights aren't illuminating?
That happened to me when I first got the FS; it seems to have sorted itself out. Contact TB on their Discord if it continues for you.
This is great, better than others, but if I may... when addressing "what ifs", you might want to consider one of the following: linking a separate video; refer them to comments, or; offering to do a separate video if you get enough likes. I am obviously biased as I came here to find out how to ape your bindings as a newbie, so ignore me if you wish. Just my two cents.
Your comments and suggestions have been noted and banked ;)
why cant I look around with mouse when I have the flight stick plugged in?
You have to unbind the H2 settings in the sim to do this. Hopefully this'll be addressed by TB in an upcoming firmware update.
@@Huddison oh I didn’t realize you can’t have both at the same time
@@Huddison I found a fix, if you unbind them then rebind them again it works
hi all
anyone tried the joystick on steam on linux.
with no crashes to Desktop, plus NVIDIA DLSS enabled, steam on linux is getting better every release.
For me, the heading bug still wants to change while in instrument view mode. Not sure what I’m doing wrong
You can't switch between instrument views?
@@Huddison I can, but when I switch between instrument views, the heading bug also moves left/right. Probably just something bound incorrectly on my end.
@@AlienTermite It should only turn ever so slightly when switching between views (I haven't really noticed).
did you cut down the spring, that's a mod that's a game changer for this stick, its just too stiff
The stiffness of it is perfect for myself and others; but some like yourself do find it a little too stiff.
whenever i play msfs and i pull up it keeps on going up till i push it down. same when i push right, i have to push left to stop it.
Sounds like normal aerodynamic behaviour, but join our discord to ensure something strange is not going on with your sim.
@@Huddisonok, its just really annoying when trying to land
so basically like this: i pull right, it will keep up going right even though the stick is straight.
and when i push left, it stops banking
when i pull up, it starts rising and rising even though its straight.
so i pull down to fix it
Have you tried the helicopters yet?
I will do videos on them soon.
@@Huddison Looking forward to them!
Hi im suddenly having problems with my flightstick throttle not working. it works for about 10 seconds then power seems to cut out even though its still on full throttle. This is on default settings so nothing ive changed
Yikes! What platform are you flying on?
@@Huddison pc but i havent had a chance to see if its doing the same on my xbox yet. Its so strange and i cannot see anything obvious in the settings causing it
@@tonixuk Under power management: check to see what inputs you have set to throttle.
@@Huddison i will do. im pretty sure its just the default profile you get when u plug the stick in but will check and reply tomorrow as im at work at the moment and away from my set up
@@Huddison So i figured it out with the help of someone on the forums. I had assisted take off in the settings which causes this problem on a few of the aircraft when using a flight stick. so relieved it was an easy fix
Looks like pushback is still set to the same button as the flaps. It was X by default. Your plane is rolling backwards when using the flaps lol.
It might well have been 🤣
@@HuddisonI got my autopilot set up. I used the trigger as a modifier. A,B,X,Y when you press the trigger arms Alt, heading, Nav, and VS. Holding A,B,X,Y and then using the hat switch changes the settings for each of those. I have Y set as a modifier for both VS and heading so that I can control pitch and heading both with the hat switch but I also still have A set to be the modifier that you hold to change VS. Also you can use the buttons for the view and the start button as well in combination with the trigger. The trigger only operates the brakes on the ground so it can be used fo modify anything. Also all of the A,B,X,Y buttons can modify the trim wheel to do things like mixture, zoom the GPS whatever. I haven't gotten that far yet.
I cant save custom profiles on my Xbox Series X.
Thanks for feeding back; I do find it strange that some folks can, whilst others of us can't.
@@Huddison It is kinda strange. I haven’t tried it on PC yet.
@@MrKmcgee69 You should be fine with saving profiles on PC.
@@Huddison I tried it on PC and it works great. I really like the Flight stick. Hopefully the Xbox series S/X controller profile issues get resolved soon.
@@Huddison I found a solution to the issue. In Xbox menu under storage free up space u need to shrink MSFS. Then go back into game on xbox and delete rolling cache. Next I went to my control settings menu and on my TB Flight Stick was 6 Helicopter custom profiles due to me trying to create one and it not saving after leaving the menu. Shrink game, delete rolling cache and it fixed my issue. I had to reinstall Deluxe/Premium Upgrades and World Updates but it fixed the issue.
Wife has brought me one but not allowed to have it till Xmas day....sob sob 😭.
Something to look forward to 😀
What’s a heading bug?
This'll help: aviation.stackexchange.com/questions/23166/what-is-the-use-of-heading-bug
I can't find Joystick R on XBox S.
Give me a hint of which setting you're searching for?
@@Huddison I'm referring to your settings for Cockpit View Yaw access and Cockpit View Pitch access, I use XBox S series. All I have are Joystick "L" settings.
@@Huddison I think I found it to be Joystick L Axis 6 and 7. I will see if they work as your PC settings tomorrow.
Bro does this work on iPhone in X-Plane via Bluetooth
See here: ruclips.net/video/zMy_Hi9D-AM/видео.html
@@Huddison brother I’ve seen this video you’ve sent me but I’m asking whether it’s possible to use tje joystick via your iPhone. For example on X-Plane I can steer the plane on mobile via joystick
Can I have answer please
@@Islam-vf2mj It's not possible currently I believe.
could u share the profile anyway ? please.
I don't think there's a way with MSFS.
what is the current firmware version?
1.0.7
How has it held up In a year
Maybe an update video on it coming soon.
@Huddison I've watch when you first made the video kinda my flight sim knowledge book
Series S don’t save. Lost it when restart the sim.
A few had those issues - a complete reinstall seems to work (if a little drastic).
Hi, Series S user. My profiles save ok
Touch pad does not work for me in the aircraft. In menus it does but it's slow to react.
Thanks for the feedback David.
No problem at all.
I know you said it was on PC you configured during the video. For reference the axis naming on Xbox are:
Rudder - joystick L-Axis 2
Pitch - joystick L-Axis 3
Roll - joystick L-Axis 4
Hi Huddson, just thought i let you & your fellow RUclips subscribers know that the new Turtle Beach VelocityOne Flightstick works well on a Linux PC
Below i have footnotes below
OS: Nobara Linux 36 (Thirty Six)
within terminal type lsusb hit return.
Bus 001 Device 002: ID 10f5:7055 Turtle Beach VelocityOne Flightstick
within Steam go to controllers make sure Turtle Beach VelocityOne Flightstick is seen in Steam Detected Controllers
launch game on Steam enjoy your flight.
Headphones: work
Mapping: works
as a side note
DLSS works within Steam on linux
in launch options add PROTON_HIDE_NVIDIA_GPU=0 PROTON_ENABLE_NVAPI=1 %command%
also to update firmware, this can also be done within the Mobile App store.
Wonderful - thanks for the addition!
Thanks!
Thanks Edward :)
Thank you
You're welcome