Water Converted into Explosive Gas - The Ultimate Hydrogen Generator - HHO
HTML-код
- Опубликовано: 30 сен 2024
- In this video, I will show you how to make a Hydrogen Generator that produces HHO gas. Electrolysis is used here to separate the Hydrogen from the Oxygen in Water. The HHO produced is highly combustible and can be used as a fuel source.
I used Stainless Steel Hardware which is more expensive than normal steel or zinc-plated steel, however, it ensures that the electrodes do not corrode or contaminate the generator or the gas.
For the electrolyte either Sodium Hydroxide or Potassium Hydroxide should be used, using table salt will not produce as much gas and it will also produce chlorine gas and turn the water yellow.
------------------------------
Making a Simple Hydrogen Generator
hydrogen from water
how to make hydrogen
how to make a generator at home
#hho #experiment #hydrogen
![FendiDa Rappa - Clock Dat ft. Shamar Marco [Official Music Video]](http://i.ytimg.com/vi/3NBU8KHdxYY/mqdefault.jpg)
🎉🎊🎉Congratulations to @chiranjeebswain4313 and @suheladesilva2933 for winning the 1000 subscriber giveaway, there will be many more giveaways in the future so stay tuned 🎊🎉🎊 Also id like to say Thank you to everyone for your support :)
And how did you build de circuit conversor to 12v?🤔 very good video! 👏👍🏼
@doccosta8336 Thank you, I appreciate it :) the circuit you can buy for relatively cheap from aliexpress or somewhere online, its called a boost converter
@@doccosta83361
Now cook you dinner on the HHO.
Hydrogen stoves are the next big thing
@@WackyInventions why didn't you turn that into a stove?
Glass jars are a bad idea. Hydrogen is extremely explosive. If you have a failure while lighting the hydrogen. The glass jar is like a grenade. Shooting shrapnel in your face. Pick glass out of your face sucks. Use plastic.
@@rsk-y7p Larger surface area. You want to have a neutral between positive and negative to avoid sparks. Spark make boom.
@@rsk-y7p Your welcome 🤗. Just be careful if you're going to play with hydrogen. It's very easy to make and also very volatile. I learned the hard way. I'm lucky I didn't lose an eye. Do your research and wear some PPE.
Also assuming the pressure could do a number to that jar lol
My man’s speaking from experience.
Do you have plans for your kit or a video?
At some point I want to relearn physics and engineering to build it, but Murphy's law will always be right above my head.
There isn't a better time to start than now 😁 Start small and build your knowledge and skills and proceed with caution. Murphy's law is the basis to my life, and so accurate 😂
@@WackyInventions Thank you!!
They're really easy to build. There's just no practical use for it. If you try and burn hydrogen from it, you'll cause an explosion like I did. I don't recommend.
My advice is use two bubblers when I was young I made one and only had one it back fired through the single bubbler and went to the main jar which was a pickle jar with the lid hot glued to seal it and increase the pressure of the gas, it blew the hot glued lid straight off and I wasn't sure if my hearing would come back, it did but I learned a valuable lesson there lol.
THATS SO OPTIMISTIC LOL HAHAHAH @@WackyInventions
Out of all the HHO vids I've ever watched, this is probably the most visually appealing set up I've ever seen. Everything just feels crystal clean. Thanks for sharing
I want to thank you for your kind words, although i am not a big channel yet, i put in so much effort and sometimes it feels like a waste of time but a comment like that just makes it all worth it and motivates me to carry on. Thank you 😊
Also I would like to let you know that you've been entered into a 1000 subscriber prize draw, if you read my pinned comment you will see the full instructions on this video. Goodluck :D
@@WackyInventionsyour effort shows, it’s not easy to come by these slightly past beginner geared videos with good build quality!
@Squidkid96 Thank you, ive been running on steam trying to build this youtube channel, all my saving have gone on the videos haha, but i promise its only gonna get better 😁
Something you did that I’ll definitely take advantage of, is use something other than hot glue or super glue and actually say what you used. Adhesive science should be way more common knowledge or maybe I’m just stupid
well, we all know you are going to be king of your own settlement when the zombie apocalypse hits
Love this comment 😂 you made my day, I just want the zombie apocalypse to start now. I watched the whole of The Walking Dead series during covid lockdowns and that was my life, and i miss it.😂😁
Will you make one to order? How much will it cost?
you should put some medium-grade wire wool in the final pipe before the needle. this would have prevented a complete flashback to the bubbler. the air space above the water can be enough to cause an explosion, last thing you want is a glass bomb.
Nice design, but risky being glass.
wouldn't any water function as a one way valve?
@lostforwar5619 correct that's the purpose of the bubbler. You're also supposed to have a flashback arrestor as a primary safety and the water in the bubbler as a secondary.
if the flashback to the bubbler pushes enough water out of the way almost like it did in the video, it could ignite the hydrogen.
if you Google flashback arrestor you'll see small inline devices that either have a membrane or a fine/medium wire wool being sold to prevent this.
Edit: ruclips.net/video/JObaMblT8Bs/видео.htmlsi=IZV-QjCBg-p6l5ko
this is a spring-loaded flashback arrestor with multi stage safety.
That flame is HALF the temperature OF THE SUN.
70% of the sun is Hydrogen 😁 but that burns at around 15 million degrees celcius at the core and 5500 degrees celcius at the surface
@@WackyInventions Ahhh... still Hotter than hell. xD
About 10 years ago I had this experience in which the filter exploded on meIt is very dangerous and must be wired correctly with the positive output otherwise it backfiresDon't try this at home at all
I appreciate that you used RTV to prevent leaks, and that you even went back and let us know you added another metal washer to the mounts. You know your audience haha 👍🏽
Haha, Thanks, honestly I ran out of washers and thought it would hold like that, but then i was like nah I can't leave it like that😂
wacky, I would use a plastic or metal container as a safety measure due to the pressure that the explosion makes inside the small space. And you could put a diode after the converter so that if there is unwanted contact between the plates, the current does not return with that amperage and damage the batteries.
It was really difficult to find an appropriate container, just for video purposes i wanted it to be see through and all the plastic containers i found just wouldn't seal properly, i did look thick glass and it withheld the pressure of the explosion, but platic would have definitely been better. I plan to make a dry cell in the future so that'll be stainless steel plates with thick polycarbonate plastic and should be alot safer :)
8:15 that wasa brave move there
Had to show everyone the point of the safety device. I was confident it would work well because I pressure tested the whole unit before attempting something like that. Not having a bubbler could be really dangerous if some backflow was to occur as there is way more gas in the main generator.
I would like to let you know that you've been entered into a 1000 subscriber prize draw, if you read my pinned comment you will see the full instructions on this video. Goodluck :D
It's crazy how 1 of the most EXPLOSIVE gasses, plus oxygen, when together as a gas form, create a anti-flame liquid when done right.
edit: im stupid. i haven't done much chemestry yet in school so i don't know much. y'all thank's for correcting me :)
I know, its mind blowing, I still cant wrap my head around that concept, how can be both dangerous and safe 😅
it's not an anti flame liquid it just restricts oxygen from fire
@@GIHDOR and can remove the heat. It attacks fire on two fronts. The only thing it doesn't do is remove the fuel (usually)
Water can't put up any kind of fire , It's just very good at cooling thinks down and isolating them from oxygen in the air (because it's liquid ) water has very strong bonds , so it won't react with oxygen , but burning nitrogen will create water vapor , so water can't burn (with oxygen ) , water can be product after burning
@@GIHDORand cools thing down
Awesome project. Fix the bubbler intake hose! pleas.e Convert the glass jars to 4" PVC with clean out trap. Love the idea with the fender washers. Nice job.
Thanks for the tips. I'm glad you enjoyed the video aswell😊
2009 tutorial with 2024 technology
try combining compressed air with this it will make flame even hot along with control valve the compressed air make flame more attractive and it will concentrate flames to one point i hope you'll get my point anyway love your video ❣️
Great idea, I will definitely try this later, thanks for sharing and I really appreciate the support 😁
Now pipe it into your air intake and retune the engine to use 2/3 of the fuel.
This would be a cool science project ngl
Good luck it won't work 😂😂
@@Thatoneguywhosucksatlife.You dumb?
@@Thatoneguywhosucksatlife. What why?
Butuhnya itu hidrogen setara motor mobil alat berat kapal bisa berjalan stabil...kira kira pengubah air menjadi hidrogen butuh ruang engine serta ruang bahan bakar seberapa luas...???
Thumbnail was actually real😅❤
No click bait on this channel 😂
Add a one way check valve for safety and to reduce flash back.
Flash-Back arrestor
make one that splits hydrogen and oxygen, and then you can fill a tank with it an go scuba diving!!! AWESOME PROJECT, GONNA TRY TO BUILD MY OWNN
Thank you 😁 pls use plastic for the container, the glass was just for visual effect and isn't safe. Also you can just compress normal air into a scooba tank and use it. 👌
Will the batteries die after using them for 2-3 times ? As I am connecting possitive and negative Through water, they might die or am I wrong ?
My batteries wont die because I am controlling the current with that circuit board , that way i do not over discharge them and over heat them so they will be fine for many charges. If you dont control the current then yes they will die
Just to be on the more extra safe side, I would add an extra bubbler. One bubler makes the risk of a catrostrophic explosion slim, but a second one will half that to half as slim.
Thanks for the suggestions, it would have definitely been safer :)
Maybe make the bubbler bigger perhaps just so the bubbles has more traveling before reaching the surface. Just my 2 cent of thoughts.
Using electrolysis to make hydrogen is using more energy than you will get back. Electrolysis is not 100% efficient so some high quality energy (electricity) is lost. Then you have to convert the hydrogen back into electricity. Burning it in a power plant will give you 40% of the energy as electricity. The other 60% goes to heat. This is not a lack of efficiency but the mandatory loss described by Carnot's law. It is just the way the Universe works and there is no way to improve the efficiency of a combustion process to convert fuel into mechanical energy. A fuel cell is more efficient at 50-60%. Still, if you start with a 1000 joules of electrical energy, you get at best 500 back.
If you sand the washers it will increase the surface area and make the generator even more efficient
Thanks for that, when i build another one i will definitely do that, makes sense 😁
What does mean with sand? You make them most roughed or not uniform?
@@lucasmarjona making them rough causes the electrodes to "stick" to them which is good for efficient product of HHO
this is amazing, i will be scaling this up am making a very normal tool not a weapon. (yes this is a joke i dont really wanna get hunted down)
Sir, you never saw this video
Now let your kids play water gun with the neighbors kid
Water gun that shoot H instead of H²O
i and my friend made this for a project wihtout the bubbler, we lit it on fire, it blasted so hard it shook our school
we did it 3 days ago and we are 14 years old
Thats was very dangerous, but I know how you felt, when I lit the water bottle full of HHO , the explosion was so massive, my eardrums started to ring. Next time il know to wear ear protection.😂
Also I would like to let you know that you've been entered into a 1000 subscriber prize draw, if you read my pinned comment you will see the full instructions on this video. Goodluck :D
@@WackyInventions and i have a question, the bubbler stopped your flame from going to the generator, but the second time, nothing happened, it only made a nice torch with the flame... why?
@christoalphonsejoy2431 The First time i used a needle that was too big and there wasn't enough gas pressure to keep the flame from going into the tube so the flame continued burning until it hit the water. For smaller HHO generators you need a medical needle as the hole is much smaller, but you just cut off the sharp end and make the end of the needle round again by squeezing it gently with pliers. If you have any more questions il be happy to try help :D
@@WackyInventions thanks a lot, i actually understood a lot about this after i discovered your video, sorry to bother but one last question please.. if i win the giveaway, would u give me this generator along with the potassium hydroxide instead of a cash prize?, i like it a lot because it is the most minimalistic, small, clean, fast and easy looking generators i have seen so far, it also produces hho at nicely fast rate that it makes me want that generator over money
Now let’s make a car
I will be doing a 1000 Subscriber giveaway to 2 lucky people. There are 2x £20 worth of cash/gift card prizes in your country's chosen currency. The contest begins from the time this comment is posted up until the 1000 subscriber mark. Entry is FREE, all you have to do is subscribe and leave a Comment. Goodluck :D
(Comments posted before this comment on this specific video have been automatically added to the prize draw)
Winners will be sent an email to reply to which will have full instructions and how to claim their prize. Make sure you use an account where you can edit your comment as this will be used for verification. You will have 14 days from the date I contact the winners to respond and claim your prize. If a prize is unclaimed another person will be selected at random.
This contest is in no shape or form associated with RUclips, I am in full control and responsibility for the giveaway Entries for this giveaway have now closed, participants have been gathered, look out for the next give away
how will you email them just from the account?
@christoalphonsejoy2431 So basically on RUclips there is no official way to contact people so i will send the winners an email address where they can contact me on, then i will give them a code that they will need to add into their comment by editing it and that way i will know that i have the correct person, from there i will keep contacting the person through the email.
@@WackyInventions one more question, how will you find the winner? are you gonna use a random comment picker or find your favorite comment?
@christoalphonsejoy2431 That I haven't decided yet, but it will most probably be on a random generator The odds are quite high as there are two prizes equal in value and not many participants. The more views and subscribers I get the higher the prizes will become. :)
@@WackyInventions thanks a lot, i actually understood a lot about this after i discovered your video, sorry to bother but one last question please.. if i win the giveaway, would u give me this generator along with the potassium hydroxide instead of a cash prize?, i like it a lot because it is the most minimalistic, small, clean, fast and easy looking generators i have seen so far, it also produces hho at nicely fast rate that it makes me want that generator over money
when i was young i made a hho generator myself just a lot bigger and i torched stuff. then 8:15 happened to me without a bubbler, pieces flying everywhere haha
OUTSTANDING PERFORMANCE
Thank you 😁😁😁
Move to the NORTH POLE Convert the ice to FUEL ⛽️ Then Take Over The WORLD 🌎 😂
@DominicMarshall-gy3mq You, sir, are the type of person who loves to watch the world burn😂 Dont give America ideas😂😂
It's better than Mr Indian hacker 😮 make it
Thank you bro, you're too kind 😊
@@WackyInventionswhere are you from bro?
@nirmalkumardas9582 I live in the UK, where are you from?
@@WackyInventions india (BHARAT)
@nirmalkumardas9582 Nice, i noticed alot of my subscribers are from India, im glad you enjoyed and hope you come back to my channel for the next vid :)
I am from India I watched your video
Thank you, I noticed alot of my subscribers are from India 😊😄😄
Great work sir!
Thank you, I appreciate it 😊
Conventional wisdom tells me you wouldnt be able to power the generator from the produced HHO mix ..... I mean if it was that simple all our energy problems would be over right?
Watching these HHO generator videos however makes me question this ...... there is a significant amount of energy released from combusting the HHO
Kinda feels like we are being lied to.
That part I haven't figured out myself and I get how you feel, I need to find out too. I believe its possible but if i find that its not I wont lie because I ain't about posting bs. Definitely will make a video on trying to run an engine when i have the funds :)
Don’t do this at home as others have said yes because of toxic heavy metal water contamination from electrodes, but also because it is very dangerous to have the hydrogen oxygen mixed, as you can see by the fire flashing through the line. it would be safer to have separate lines for the positive and negative electrodes, so the hydrogen can be collected in a low oxygen, non explosive state
Okay wait how would someone separate the two tho into two lines over the two electrodes while preserving conductivity?
Tip: You can increase the surface area a bunch by sanding the washers.
Amazing video! Very well-thought-out and makes for a perfect example of what green hydrogen can be!
Thank you for the support, I believe hydrogen is the future for our world, just safety is a concern at the moment. I wouldn't really want a high pressure hydrogen tank in my car, however an on demand generator would make sense and would be much safer.
I would like to let you know that you've been entered into a 1000 subscriber prize draw, if you read my pinned comment you will see the full instructions on this video. Goodluck :D
@@WackyInventionsOh! Thank you very much!
Not green. Sorry. The salt water remaining turns to lye. An alkaline that's created by ripping water molecules apart with electricity. Green means no bad side product to dispose of too
Please turn off the annoying music, no one likes music in technical videos.
Dont worry, no more music on this channel, I only had to put it in due to my crappy audio, half the audio was un unusable, but now ive got a new mic and have started doing english voiceovers, check out the new video, hope you like it :)
a tip for the future if your looking to increase the amount of surface area you have thus increasing total output try etching your metal the goal if to make more nucleation sites for production of o2/hho
Very beautiful hydrogen torch/generator. I've actually been intending on building one at some point, I have some moonshine jars and stuff but nothing as elegant as you have, it gives me a steampunk vibe and i absolutely love it.
Thank you, happy you liked it 😁 if possible use plastic, it'll be safer, my lids were basically spring loaded so it would blast the seal open in case of an explosion instead of keeping it in and shattering the glass like a normal jar
Nettes Spielzeug. Hab ich als Jugendlicher auch gebaut. Aber irgendwie endete es immer damit, dass mir alles um die Ohren flog. Ausversehen natürlich 😬
I always wanted to make a proper one when I was a child, so I made this RUclips channel to remake all my childhood dreams that I didn't have the money for to build. By the way, I still don't have any money, I just gave myself a reason to do it😂😂
Dude EXCELLENT song choice, I was able to stay hooked on it the entire time. I think you just made me discover a new way to pay attention 💀
o2 and h2 are being generated together (!!) no way to counter high pressure / no overpressure safety valve for this much uncontrolled gas generation, high risk of shortening the electrodes with no spacers and rather arbitrary placement … from potential explosions with glas fragmentation to (comparatively) harmless failure and burning of your electronics, this thing got everything. But at least it looks cool while it lasts …
Beautiful time bomb isn't it?
Don’t convert this into a car guys we know is what happens then💀
I could do without the god awful music.
Haha, dont worry next video will be music free, my phones mic was really bad so the music was just a cover up, but now I got a good mic and will be doing a voice over aswell.
@@WackyInventions Thanks. Much appreciated.
using wood is not a very wise idea it becomes conductive when doused with water and electrolytes
True, but the water never touches the wood, but i get that over time it would seep into the wood through condensation, so as a long term hho cell you'd be better off with fully plastic container, but i have to say it it hard to find an appropriate one
You're using more energy that is drained from the power cells than is gained by the heat of the combusted gas.
You aren't "generating" anything.
Hydrogen
Neat vid, learned alot, subbed!!!
Thank you for the support, glad to have you on board 😁😁😁
Не повторяйте если не хотите получение травм лица и глаз!
Good video but really could have done without the music. It's so grating and in your face
I didn't really want to put it in, but the audio recording from my phone was so crappy that I had no choice but to use something, but dont worry, all my new videos will be music free and Il be doing a voiceover because I got a new microphone 😊
*Be careful around large bodies of water.*
Haha, I was getting ready to jump out my window and make a run for it.
What's the name of the music that starts playing at 2:35?
Cool 😎
Thank you 😁😁
@@WackyInventions ❤️
Can you post full materials and maybe links
bro is on the us government hitlist now
You could also risk getting assassinated by pumping it into your cars air intake and increasing HrsPwr as well as fuel efficiency and the hotter/cleaner combustion cleans out carbon deposits. You just have to compensate for the Fuel/air mixture. But a simple tune can do that.
I mean, worth the risk 😅
Except it uses more power than it will generate
What happens if the water used is not distilled water like tap water??
Tap water is different in quality depending on where you live
However its always treated in some way meaning youll likely get a byproduct of whatwver is used to treat water depending on where you live
I think in most thats gonna be chlorine
Electrolysis don't hydrogen it produces Oxygen and heat too! Keeping these all three together in a jar isn't a good Idea I think, if something get blocked and pressure builds up then hydrogen and oxygen at stoichiometric ratio will not spare anything!!!!
Dont worry the seal isnt a permanent thing, every time the bubbler popped, the lid would lift a little allowing the pressure to escape, basically like a pressure release valve because the lid was held down by basically a spring(the circle band)
@@WackyInventions Interesting!!
Now make it into a box :)
*Subscribed*
*Notifications allowed*
Thank you, I only promise good stuff to come, hope you keep coming back 😊
@@WackyInventionsI will! THUMBS UP EVERYONE!
these videos are amazing i wanna make a powersuit for detterence. where the innerlayer is sewn with a copper grid that is earthed out at the bottom of your shoe underneath the main body of rubber prottection with another circuit designed init with shock pads on elbows shoulders down the back across the arms into glovbes on nuckles and palms for grip shock. and a lcd dispacy on visor showning your live an connected to a powersource withpackpackliike chamber on back ha most powerful person alive not even the hands of the law can get you
Haha, I love the idea and your imagination. It's definitely not impossible but probably highly illegal. I love it😂😂😁
you should probably just take your meds instead.
Could you use it for Ballons because hydrogen is lighter then the air
You could, but it would be very dangerous as Hydrogen is extremely Flammable. Search up the Hindenburg disaster. It was filled with h
Hydrogen.
I am amazed by your workmanship.
Thank you for the compliments, im happy you liked the video 😁 got many more Wacky ideas coming.😊😁
This is cool but remember this is Brown's gas, VERY DANGEROUS. May just wanna consider splitting each element to it's own area.
How would you split them?
Put a solid divider between + and - electrodes and don't let water level drop delow. H forms on negative side and O on positive and rises to its own isolated chamber. Add a hose and bubble to each chamber to capture@@Jacob-ol3zb
Instructions unclear made a hydrogen bomb...
I mean, close enough...
why it give blast at 8:17 and after that it give smooth fire
Ah yes, there was a small leak from the main generator, so the pressure coming out was low, also i used a thick needle , so those two things combined allowed the flame to travel into the tube, later i cleaned the rubber seal and also added a thinner needle which solved the problem 😁
❤ to the bubbler, our favorite character
Haha, He is the main character 😂 small but mighty
congrats you just showed how to make bombs
No comment 😂 are you from Lithuania?
Did anyone actually build this?
Its 100% legit
"The Ultimate Hydrogen Generator" not even close for a home made unit.
Try a much higher voltage about 300V @2 amps. and add a pump to force the fluid to move faster around the washers. you will get a way higher output for that size of device.
Using a much higher voltage allows for a "brute force" extraction.
قوي جداً يقطع العلبة البلاستيك إلیٰ نصفين مثل هذه النار لا توجد أبداً 😂
stainless steel electrodes make the water carcinogenic. use graphite rods from welding suppliers.
Instead of washers and nuts, you could do stainless steel wool, which would be more effective and so much less work.
Gallium, water, and aluminum will generate copious amounts of hydrogen very simply, and you can recover the gallium.
Nice, thanks for the info, definitely an interesting topic i will look into 😁
Awesome! You have earned a sub 👏
Thank you, much appreciated 😁
Why have we not make cars run with this
Either its not feasable or the big bad oil companies dont want us to know, either way i will find out and make a no bs video in the future😅
@@WackyInventions very true and can’t wait to see it!
What if you upscaled this, x100? What would the power of the thrust be? Or x1000? If it’s running off water, is there a way to make this into a perpetual engine?
Perpetual Engine really easy actually just attach a magnet to an arm in front of your car that pulls the magnet on the car! Just don't forget to put holes to see through!
Thank you could you do this and show me how to fill balloons. I have an idea for an air ship. But seriously how would I fill a ballon?
I just want to warn you that hydrogen is very dangerous, and you should be very careful, but you may like my other video, called how to make flying balloons without helium, just a 3 simple ingredients make pure hydrogen without the oxygen in hho. But if you do want to use hho you would just need to separate the electrodes and collect just the hydrogen , but thats more complicated than the method i showed in a different video
@@WackyInventions me and my son are making zeppelins you're the best
@Drazja I wouldn't recommend Hydrogen. I think Helium would be better for such a project and you can get disposable helium tanks for balloons for relatively cheap. Just research the Hindenburg disaster, Hydrogen was used.
@@Drazja probably a bad idea, considering the hazard. Should also look up "oxyhydrogen". You don't want to end up dead form doing basic chemistry you don't understand.
So like why don’t you put this in a hydrogen powered car to make a water powered engine, or a least a small 49cc hydrogen powered engine, add an alternator and huge pulleys to make electricity
Excellent idea, im not financially ready to try it on my car but a small engine from ebay should do 😂
@@WackyInventions that’s what I was thinking, but be careful now don’t wanna get on the governments watch list😂😂😂😂
But otherwise really cool, i always wanted to make somthing like this
@lolbossisboss5738 yeah, im kinda scared to make a video like that, but I still will when the channel grows abit, im sure if you know about Nikola Tesla, but in my eyes he is the worlds greatest inventor/scientist, sadly he was killed although they make it seem like he passed away of natural causes
@@WackyInventions ahhh I see i see, well, if I’m ever bored and I have money laying around I’ll try making the oxygen and hydrogen separater that you showed and see if I can find any small motors and Maybe try modifying it to work with hydrogen gas
Cr 6+ Cr 3＋↑↑↑
Cr 6+ Cr 3＋↑↑↑
Hey please read this message the gas exiting fitting 4"/4" u did in the generator whats its name?
Reply before two days.
Hi, I bought it from a hardware shop, the online description was : PCL HC5656 Male Hose Tail Adaptor 1/4" x 1/4"
But please use plastic containers, glass is dangerous
Thank u ,but how can I attach the electrodes or anything in plastic containers
Or can I use borosilicate container?
@karchana8705 you can use the same method as me but instead of the wooden cap, use the plastic container lid and put the metal bar through the lid and tighten it, hydrogen and oxygen are very explosive and crazy powerful, thats why I say use plastic. It will be safer in case something goes wrong, but be careful regardless.
THIS IS NOT A HYDROGEN GENERATOR! stop miss labelling videos like this!
Is it safe to breath the oksigen and the hydrogen at the same time like 30-60 minutes with this design?
@FranklinG Its not recommended, but If you want just oxygen, then you need to split the two electrodes and gather just the oxygen
Breathing hydrogen won't kill you but a lack of oxygen will, so I wouldn't risk it
A lot of people here in asia said drink hydrogen water and inhale it will be good for our body, but I dont know is it the same way with this or not, they said hydrogen water is full of anti oxidant..
@FranklinG hmm im not sure if the ionised water you are talking about is the same as alkaline water, there is one company in the uk which sells it so its definitely safe to drink (ActiPH)
@@WackyInventions thank you for the reply bro
The video would be more fun to watch without the music. And no! Turning the volume off is NOT an option!
bro what is the powder?
Its caustic soda :)
LITERALLY YOU JUST CREATED A BOMB
GOOSE, you need to separate the gases, and rejoin them at point of ignition, this stops creating a explosion, if you have only hydrogen that burns very slowly separated from the oxygen which doesn't burn it all, you will avoid blowing yourself up GOOSE.
This is why you join the two gases at the point of ignition through a manifold, when the hydrogen and oxygen gets mixed in the manifold at the point of ignition you cannot blow yourself up, you need to be more careful, because those lovely glass bottles that you've got containing hydrogen and oxygen which is extremely volatile can turn into shrapnel travelling very fast.
You GOOSE!
Terrible music selection.
Dont worry next video will be music free and il be doing a voiceover 😁
Ты бы это всё пилкой для ногтей делал ))) Нормального инструмента нет что ли ?
Davis Thomas Clark Paul Young George
Эх, увидел то что я делал в школе 20 лет назад. Жаль не было у нас камер, интернета и ютабчика)
School is the only place you could do crazy stuff and get away with it. I made so many crazy things and brought them into school 😂 😂
no balance board is he that insane?
Yes bro, i like to live life dangerously, also everything was calculated 😁
What s type glass is using in video? Its normal glass or specially addapted glass?
"specially addapted glass"
lmfao. Stay in school, kiddo.
do you have a material list with amazon links?
you would probably see an efficiency increase if you paired the electrodes diagonally instead of side by side
Thats a fair point, I didn't think of that before. I love marginal gains 😅 Thanks
Also I would like to let you know that you've been entered into a 1000 subscriber prize draw, if you read my pinned comment you will see the full instructions on this video. Goodluck :D
Congratulations for the effort. I even thought wanted to watch it till the end but the music was terrible and head ache. In my opinion that The sound of tools was far better than the music..
Thank you for the honest comment, all my new videos will be music free, and will have an English voiceover. My recording equipment was so bad in the earlier videos, so half of the tool sounds were messed up, the music was kind of a cover up, but ive got a good microphone now, hopefully you'll like my new video coming soon 😁
The simplest flashback arrestor is a cigarette filter which fits tight in the hose
Great video! Do you think this would run a 383cc gasoline generator ? If possible what sort of conversions would I need? Some sort of carb kit? Thanks!
I believe it should, i haven't worked exactly how to power an engine correctly, but I have plans to get an engine running soon. The problem is regulating the flow of gas when revving, but for a constant rpm application just a tube in the carb should do and then adjust the flow of gas.
Not even remotely.
@@WackyInventions Then you failed basic chemistry. Not enough output with the amount of energy required for electrolysis.