So I’ve had my ridge grapplers two years now, 56k miles and they held up pretty well. Think they would’ve lasted longer if I’d been better about getting them rotated. Just ordered some Falken AT3s, we’ll see how well those hold up.
Louisiana G sorry for the late reply. They’re amazing. I have almost 50k on them and they’re holding up. Still lots of tread left and they’re not loud. I don’t intentionally go through deep mud, but whenever I go to the off-road Park or construction site, they hold up well. Haven’t gotten stuck yet. For the price I’d definitely buy them again, would probably just downsize a bit and get a new set of wheels.
Here is the gallery link to this truck. The lift kit, wheels and tires used are all included in the add along with the price of each. As far as labor goes, most shop rates are different but if you are interested in having us do the installation at our shop in Appleton, WI please send an email to info@offsetsgarage.com and they should be able to get you a rough estimate! bit.ly/2KGAtfL
Could you guys do a video of GM trucks lift heights next to each other from say 4 inch to 7 inch so we can get a comparison real time view of the difference?
I have 22x12’s -51 offset and 33x12.50 tires. All I have is a 3.5” leveling kit up front DID NOT trim front valance and only rubs inside of the back part of wheel well at full crank. Unless you want a lifted truck you don’t have to buy a 6” lift to fit these wheels and tires. Yeah it’ll rub a tad bit at full crank but I have mud tires and they don’t grab the bottom of the wheel well liner and rip it it. Just letting you guys know you don’t HAVE to buy a huge lift to run bigger wheels and tires. Just a 3.5” leveling kit up front 👍🏼
I have not done my lift yet looking to do a 2.5 level lift in the front to reduce the rubbing I am running LT 275/55/R20 BF Goodwrench Baja Champion KO2 All Terrain tires on a 20 x 12 negative offset -44 on a 2010 LTZ Chevy Tahoe.
Not as bad as I thought. Looks great! I’m also doing a 6” lift with 33’s. But my wheels are 20x10 -24. I don’t want it sticking out too much as I still do a little city driving
I would to see how this truck would look with chrome wheels instead. I love the chrome front and rare bumpers look, but haven't found a video online with 22x12 -44 35s gladiators. Love your videos I'm always watching thanks!!
I have a 2016 gmc 1500 4wd with magneride. Planning on running a bds 6 inch lift with 22x12 wheels and 33 inch tires, but I’m told that would not work. Would you agree?
Is there a difference in ride quality from a 4 1/2 vs 6 1/2? I planned on 4 1/2 but the place that's doing my lift said the increase in price isn't that much more
@Custom Offsets Y’all should all invest in another location, hire more staff and branch out. Easier said then done but all hard work pays off. Maybe start off in Houston, Tx hint hint. Love all the vids you all do and the work done to the trucks is amazing keep up the work.
Why did I watch this? Now I want this and it costs alot plus I'm just buying a new one so I won't be able to do this for a while so I'm just gonna be jealous lmao
Quick question, what's the total height of the truck with this setup? Looking to do something with my Sierra, but still want it to fit in my garage. I have a standard leveling kit on mine, and about 7" of clearance for my garage entry.
I will be getting a 6" lift next month on my 18' Ford F150. I have 33s and a little nervous about the look of the 33s with the 6". This video made me feel better, but this is a Sierra, different style of the body relative to the F-150.. Still think it will be ok with the 33s? And should I do a 5" or 4" block at the rear?
Check our gallery out for fitment help here - customoffsets.com/gallery As for blocks if you want it level 4", 5" is lifted but keeps rake to account for trailer
Yes! It looks great! I have the same tires and wheel size and I was wondering how a 6" lift would look on my 33x20x12.5 on my chevy 15' 1500 and this is the perfect video. I just wish BDS wasn't so expensive. Any other similar kit from another brand but much lower price?
Hey @customoffsets I purchased 20x12 tires. Prior to this I installed a 4.5” lift on the front and a 3” lift in the back. I’m still having a bit of an issue with clearance on my front. What would recommend to give me a little bit more room in the front? All I changed in the front was the shock spring and spindle. Curious if anything I can change to give me like 1 or 2” in the front.
Those 33's look way better than I would have thought👌
You can check out this setup here!
bit.ly/2XjMQjr
I was thinking the same thing. Fits the truck perfectly.
I like the look of the 6 lift with 33s. About to do my Tahoe the same way.
tahoe’s are beautiful
Awesome lift i like the way it sits lower on the back y'all need to come and do this in West Tx
Glad i saw this! I was thinking 33's on a 6in lift would makenthe wheels look tiny! Currently getting the 5in lift
What's the price tag on that setup? Maybe add traction bars to eliminate axle wrap.
Would 35’s have worked with no trimming if there wasn’t such a huge offset? Beautiful lift btw!
So I’ve had my ridge grapplers two years now, 56k miles and they held up pretty well. Think they would’ve lasted longer if I’d been better about getting them rotated. Just ordered some Falken AT3s, we’ll see how well those hold up.
Update ?
Great tires man! Not too loud either and do very well.
Louisiana G sorry for the late reply. They’re amazing. I have almost 50k on them and they’re holding up. Still lots of tread left and they’re not loud. I don’t intentionally go through deep mud, but whenever I go to the off-road Park or construction site, they hold up well. Haven’t gotten stuck yet. For the price I’d definitely buy them again, would probably just downsize a bit and get a new set of wheels.
@@LiftingGunsBibleTraditionk
That color is phenomenal btw
What is the overall height clearance on this truck
On a build exactly like this (wheels, tires, lift, and labor) how much should I expect to pay total? In love with this look
Probably about 2500-3000 for rims and tires.
Lift can range between on the the low end 1200-4000.
About another 1200 in labor
Here is the gallery link to this truck. The lift kit, wheels and tires used are all included in the add along with the price of each. As far as labor goes, most shop rates are different but if you are interested in having us do the installation at our shop in Appleton, WI please send an email to info@offsetsgarage.com and they should be able to get you a rough estimate!
bit.ly/2KGAtfL
Look at the rust on the shocks on a fairly new truck. Dam these people for putting these chemicals on the road in winter time
Could you guys do a video of GM trucks lift heights next to each other from say 4 inch to 7 inch so we can get a comparison real time view of the difference?
Its a possibility, but for the most part videos and pictures can only do so much justice as to how big they really are in person.
Great job!
Truck looks amazing.
That's a good looking truck!
I have 22x12’s -51 offset and 33x12.50 tires. All I have is a 3.5” leveling kit up front DID NOT trim front valance and only rubs inside of the back part of wheel well at full crank. Unless you want a lifted truck you don’t have to buy a 6” lift to fit these wheels and tires. Yeah it’ll rub a tad bit at full crank but I have mud tires and they don’t grab the bottom of the wheel well liner and rip it it. Just letting you guys know you don’t HAVE to buy a huge lift to run bigger wheels and tires. Just a 3.5” leveling kit up front 👍🏼
Hi, just saw your reply. What truck/year do you have. I have same setup as you on a 18 Silverado. Scrubs pretty hard on back.
I have not done my lift yet looking to do a 2.5 level lift in the front to reduce the rubbing I am running LT 275/55/R20 BF Goodwrench Baja Champion KO2 All Terrain tires on a 20 x 12 negative offset -44 on a 2010 LTZ Chevy Tahoe.
Total cost? With and without rims. We gotta start including cost in future builds. Slims down on questions
Not as bad as I thought. Looks great! I’m also doing a 6” lift with 33’s. But my wheels are 20x10 -24. I don’t want it sticking out too much as I still do a little city driving
Fair enough, I wouldn't want to drive a monster truck around town! 😂
I'm new the lift game should you get the lift first then come back to get wheel and tire are package for everything together?
I have a 1985 f150 single cab and i am putting a 6 inch lift
What wheel size and tire would be best?
33 or 35
I have a 2010 f150 and I'm getting a 6 inch lift with 35s (I have 33x12.50R20 right now) but I'll upgrade to the 35s later.
Hi Love your contents. We designed a grille for 16-18 gmc serria 1500. Can you help test the fitment on your Truck?❤
I would to see how this truck would look with chrome wheels instead. I love the chrome front and rare bumpers look, but haven't found a video online with 22x12 -44 35s gladiators. Love your videos I'm always watching thanks!!
I have a 2016 gmc 1500 4wd with magneride. Planning on running a bds 6 inch lift with 22x12 wheels and 33 inch tires, but I’m told that would not work. Would you agree?
Nice Set Up
Hey guys. This exact setup. Do you think it'll fit in a home garage?
That would depend on what size your garage and door are!
@@CustomOffsetsTV yo bro what would be the height son something like this
Is there a difference in ride quality from a 4 1/2 vs 6 1/2? I planned on 4 1/2 but the place that's doing my lift said the increase in price isn't that much more
Can get both to ride really nicely all comes down to price point and what you want to do with the truck and want out of it!
How tall are you? For comparison to standing next to the truck
The music in the background is on ps4 theme wallpaper 😂 (4K live city wallpaper) I have this same truck and want this done....I think it’s a sign 😂
😅 it wasn’t planned but if it works it works!
How much lift would be required for 44s?
What’s the cost of the project like that ??
What color is that truck? does anyone know? It's a badass color I like it
Looks good !!!
Does it have the 8 speed transmission?
@Custom Offsets Y’all should all invest in another location, hire more staff and branch out. Easier said then done but all hard work pays off. Maybe start off in Houston, Tx hint hint. Love all the vids you all do and the work done to the trucks is amazing keep up the work.
Martin Acevedo I second that.
Should I run 35s or 33s on my 6 in lift
35's BOI!!!!! 😂🤘
I run 35s 6in lift i had slight rub on the plastic valence but not to bad.
Are 33s good on a 4 in lift ?
What is getting cut and welded
The cross member for the differential housing was cut and then you would need to weld in a brace for the piece that was cut!
What size are the rear blocks and is there an add a leaf?
Why did I watch this? Now I want this and it costs alot plus I'm just buying a new one so I won't be able to do this for a while so I'm just gonna be jealous lmao
Quick question, what's the total height of the truck with this setup? Looking to do something with my Sierra, but still want it to fit in my garage. I have a standard leveling kit on mine, and about 7" of clearance for my garage entry.
It will still fit in an 8ft garage door!
Custom Offsets how high is the truck from pavement to top of the bed
I will be getting a 6" lift next month on my 18' Ford F150. I have 33s and a little nervous about the look of the 33s with the 6". This video made me feel better, but this is a Sierra, different style of the body relative to the F-150.. Still think it will be ok with the 33s? And should I do a 5" or 4" block at the rear?
Check our gallery out for fitment help here - customoffsets.com/gallery
As for blocks if you want it level 4", 5" is lifted but keeps rake to account for trailer
@@CustomOffsetsTV Awesome - thank u so much, amazing channel!
How much dose this cost I have the same truck
Perfecto!
is there a metric tire size that would bridge the gap between the 33 and 35? i would imagine that would make this set up look perfect!
Depending on wheel size there most likely could be!
275 65 20 is roughly a 34” tire
No rear spacers?
Correct
I was asking how tall are u the reason being i got one and am gonna get one and wanted to see how high the truck be next to me ... thanks
Fuller is pretty short!
He looks about 5’6”
Where is the location.
Yes! It looks great! I have the same tires and wheel size and I was wondering how a 6" lift would look on my 33x20x12.5 on my chevy 15' 1500 and this is the perfect video. I just wish BDS wasn't so expensive. Any other similar kit from another brand but much lower price?
Check out our gallery and see what other people have on their 15' Silverado 1500!
customoffsets.com/gallery
There is Zone and nothing wrong with ProComp
Rough Country or Unicorn might be an option
Does he get all his steering ratio
Is the color of truck factory?
Trimming with 33s and 6 inch 😂
Hey @customoffsets
I purchased 20x12 tires.
Prior to this I installed a 4.5” lift on the front and a 3” lift in the back.
I’m still having a bit of an issue with clearance on my front.
What would recommend to give me a little bit more room in the front?
All I changed in the front was the shock spring and spindle.
Curious if anything I can change to give me like 1 or 2” in the front.
jonathan gunnells how big are your tires?
I’d say do the NorCal mod if you haven’t already
Please send an email to info@customoffsets.com and they should be able to help you figure out what will work best for you!
Never liked when the rear sits lower that’s the front. Why are so many lifted trucks like that?
What color is that truck
A dark grey! 🙏
Custom Offsets thanksn
I like it BUT at the same time I don’t. 33” just looks too small from a side view
Lit
🔥🔥
Make a Nashville location haha
Lmao... You know your trucks got some fucked up wheel wells when you have to trim for 33s on a 6" lift 🤣
The tires look so small with that lift kit.
What happen to tbe other guy? Sean i believe
Shawn's been pretty busy lately and doesn't really get the time to make an appearance anymore.
@@CustomOffsetsTV is he in jail? For bootlegging wheels.
I would rather have stocks with 35s
6 inch lift and only 33s
That's a pretty ideal setup for 12 wides if you don't want to do any trimming!
13.50 at least or bust.
How tall are u ??? Lol
Bruh 6” w trim?? I have 33’s on my Tacoma 3” lift
i have 33" on silverado no lift just bilstein adjustable shocks
I have 33x12.5 on 22x14, on a 3.5 inch lift and it rubs like crazy haha but I love the look
Dear lord...
round wheels dont look good in square holes.
Lester Jones do you propose square wheels?
No round holes. Just like nature designed it.
GM designed it, and it looks good. Much better than ford
WHAT??? 🤣
Kaleb Hansens GMs square wheel wells look bogus. Just look it for longer than a moment
Any luck pulling chick's with trucks like these??
Nobody cares about engine mods? Those trucks are slugs from the factory. I'd be afraid to pull out in traffic with those mods on it.
hdz12ez I have a Sierra 1500 rolling on 35s and my truck, is no slug she scoots for having 35s and stock.
Do I have to go 6 inches if I want 33 12.5 on 18 with no trimming
Check our gallery to see what others had top do! customoffsets.com/gallery