How To Replace Spark Plugs 2003-08 Nissan Maxima

Buy Now!
New Spark Plug Set from 1AAuto.com 1aau.to/ib/NGET...
Spark plugs need to be replaced periodically to ensure continued performance and efficiency in your vehicle's engine. This video shows you how to install new spark plugs on your 2004-2008 Nissan Maxima.
• Check here for more videos on the 2004-08 Nissan Maxima: • Nissan Maxima 6th Gene...
This process should be similar on the following vehicles:
2004 Nissan Maxima
2005 Nissan Maxima
2006 Nissan Maxima
2007 Nissan Maxima
2008 Nissan Maxima
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXA...
• 10mm Wrench 1aau.to/oa/1AXA...
• 12mm Wrench 1aau.to/oa/1AXA...
• 10mm Socket 1aau.to/oa/1AXA...
• 12mm Socket 1aau.to/oa/1AXA...
• 5mm Socket 1aau.to/oa/1AXA...
• Air Blow Gun
• Hose Clamp Pliers 1aau.to/oa/1AXA...
• Needle nose pliers 1aau.to/oa/1AXA...
• Needle nose pliers 1aau.to/oa/1AXA...
• 5/8 Inch Spark Plug Socket
• Ratchet 1aau.to/oa/1AXA...
• Socket Driver
• Socket Extensions 1aau.to/oa/1AXA...
• Swivel
• Torque Wrench 1aau.to/oa/1AXA...
• Paper Towels 1aau.to/oa/1AXS...
• Pick 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Nissan Maxima 6th Generation 2004-2008: • Nissan Maxima 6th Gene...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*

[@frankperez5217]

Cannot believe how much work is involved just to replace a spark plug! I will never buy another Nissan again!

[@yourboinoah6930]

Took me 2.5 hrs Just to do the 3 rear ignition coils and spark plugs. It was also 29 degrees outside. Seems like alot of work but it's not that bad. Especially when mechanic quoted $940 to do it all. This Video saved me $500. Parts were 430 for all 6 ignition coils and spark plugs. Thank you for your help. Great video

[@americashamerica1521]

Oh you make it look so easy and effortless. I think I better wait for my husband to get home and do it. I was going to try myself.

[@nateTheNomad23]

This is an insane amount of steps for such a simple job. It only makes a larger number of users more dependent on shops and dealership service. I can see how if the sticker price can't be raised high enough to pay for the cost of producing the vehicle without significantly cutting into demand for the vehicle, that extra required revenue could be extracted by slight of hand elsewhere in the overall lifespan of the vehicle.
Rather than a more cost effective value proposition in the vehicle upon it's conception, let's just create the illusion of the value proposition, then afterwards scrape the actual value back from them slowly.

[@diagofox1]

I know this video was a year ago but I am really hoping you are still paying attention to your comments. While watching your video, I noticed you did not replace the Intake gasket. I've always been told to always replace all gaskets once they have been used and re-exposed to air. Is this something that is not needed for this vehicle?

[@eggmanfryer]

When Maxima needs new plugs I'm just going to burn it to the ground and get a Ford.

[@-thefalcon-]

I feel like doing that now. Fucking mother in laws car too....

[@horseldr19]

Your video was the only one I could follow! Its perfect!!! Sadly, I got to plugs to find 2 in oil. Seals are now needing replaced. Not sure I can do it. Do you happen to have a video for replacing seals?

[@TRQ]

+Krista Bramon We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-TRQ

[@michaeljuarez3355]

I was gonna do it myself...but after looking at this...I don't have the patience.... I rather pay to have it done and save me the headache lol

[@JHenry-tt5mp]

Excellent Video. Thank you.

[@TRQ]

+@JHenry-tt5mp Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

[@allenmiller7641]

Great video! Helped me do mine. You make some of it look really easy!

[@TRQ]

+Allen Miller Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@henrywhite9799]

how many hour does the whole work takes? my mechanic said five hours and charged me over $800.😢

[@andyluo1389]

My car has hot air pipe attach to the enngine, which did not show in this video

[@love101a3]

Do you need to change the design of the engine that’s too much hassle to take out a spark plug

[@bighomieJ5X]

Do you guys have a video on the rear motor mount 😳

[@belindaharris9920]

Spark plug

[@865WALTER]

Thank you for your videos, they are very helpful. It's the same in a 2012 maximum 3.5?

[@jarelwright2429]

Can the back two manifold bolts be taken off with an electric socket wrench?

[@hacklife4353]

Jesus Christ, This is my nightmare waiting for me

[@dakotadavid8973]

What parts are those at 15:35?

[@trevoryates8345]

So basically I need to me get rid of my 2003.damn sure ain't like a 97 hard body.

[@anthonyfew2087]

2003 model needs the parts that are being spoke on Nov

[@johnniecullom8593]

Where can I order a platinum where can I order a platinum

[@1stclayton]

This does not look fun. But it will work. #BX1

[@user-gi2mz4gq8y]

Thanks! Now I know to never come close to a nissan over 30k miles❤