Freewing F-14 Tomcat Twin 64mm Flt 1 Maiden! Look over setup! See Vid Desc! Wow! Hard landing!
HTML-код
- Опубликовано: 16 июн 2024
- Freewing F-14 Tomcat Twin 64mm
Radio/Receiver: RadioMaster TX16S (Carbon), Upgrade parts set (Silver), Leather Side Grips (Black), TX16S CNC AG01 Hall Gimbals/FrSky RX8R PRO Receiver and FrSky MLVSS
Battery: SMC HCL-HP 22.2V-5000mAh-80C (6s)
- Upgraded Elevator servos to the Hitec HS-5065MG Ball Bearing Digital Metal Gear Sub-Micro Servo
- Reinforced the elevator control rod with cutting an aluminum spar using a pipe cutter (7/32 x .014) (5.56mm x 355mm)
- Reinforced the plastic support arm for the nose gear by gluing a brass wire
- Replaced spring in the nose gear with fuel tubing
6/14/2024 
Наука
Dude!!!! Super dope flight for a maiden. Everyone cries about this jet. Everyone wants to say is a bad plane. They need to watch your video. Nice maiden
Thank you much! Appreciate your good words! There's a lot of similarities between this and the bigger twin 80mm. I'm still figuring this one out. Just got it fixed up after the botched landing on the 2nd flight.
If 75 percent fly good it still makes this f14 a bad jet to buy make a v2 soon.
@@garyrussell7076 sounds like you should stick to flying paper planes
Im Joe, Frank and that was excellent. How long have you been flying rc planes? You did that all without AS3X and Safe and did it all on the installed receiver from Motion Rc? please tell me more on how?? Bc that was excellent. Please when responding to me tell me in detail on how you set the bird up and did it. Thanks bud I would appreciate it. I would love to hear back from you my friend. bc that was some great flying. I have this plane and alot of experience flyers like me have had alot of issues with it so tell me. what trans and complete setup you did and all the inside and out bc nobody flew the bird as easy as you did.
Greetings Joe! Thank you much for your comment! Much appreciated! I got into the hobby in 2017. That is correct, there is no AS3X or SAFE as I don't use Spektrum, and the stock gyro is completely disabled via the Mix settings on my radio. My general setup is in the video description. But I'll make a video in the near future to give a more detailed rundown of my setup and modifications I did to this model.
@@frankflyrc thanks id appreciate that
you really did a great job and the grass is kinda high for the size of the wheels and it really just took off without any issues. I have mine set up with the stock gyro but doesnt fly like yours so im very curious on how you have it all set up?
@@DronemanJoeRc Thanks again Joe! I disabled the stock gyro. I'm mainly using the board for the pre-programmed control surface mix. I'm not sure what battery you're using, but if it's a large, heavy battery, that will affect how it handles the grass field, along with where the placement of your CG is.