Very good video,then I wish you answer me some few questions on this.firstly, can the welding machine replace a real welding machine? secondly, which type of transformer is that? thirdly, which one is the light and neutral of the two primary coil? Is it starting point or ending point? Lastly, which one is the electrode Holder wire of the secondary coil? Is it the starting point or the ending point? thanks and God continue to increase you in wisdom.
Okay thanks, the coiled wire, was it cooper or aluminum? And the type of transformer you used in this video?is it from UPS or inverts or stabilizer?or can any transformer be used?
You have to come out of your winding at different places to be able to adjust the amperage..And it helps to know how to weld..If the surface had been prepared..you may could kept the arc going..
By increasing turns ratio, can decrease secondary open terminal voltage to 40 volt and hence, can get better current and voltage ration to melt the welding rod. Size of welding rod seems to me, 2.5 mm and it needs 75 A and 22 volt minimum to do welding. For 220 volt input, primary turn should be 264 minimum.
Namaste sir ji Mein Malegaon Nashik Maharashtra State se hu Sir Tar number Aur Bobbin size Core Size Aur Turn kitne hai sir Mein Automatic stabilizer Bana ta hu Aur cell karta hai sir ji
i think that is good job, because in DC welding machine out put volt is 62-78, so if i calculate his turn ratio he will get 68.33 volt, if i calculate transformer loss then he will get minimum 58 volt with is better for welding. But that is not heavy duty, but not bad.
Bahut aacha bhaiya aise hi pulse transformer ka video bana dijiye
Very good video,then I wish you answer me some few questions on this.firstly, can the welding machine replace a real welding machine? secondly, which type of transformer is that? thirdly, which one is the light and neutral of the two primary coil? Is it starting point or ending point? Lastly, which one is the electrode Holder wire of the secondary coil? Is it the starting point or the ending point? thanks and God continue to increase you in wisdom.
Yes and yes
Okay thanks, the coiled wire, was it cooper or aluminum? And the type of transformer you used in this video?is it from UPS or inverts or stabilizer?or can any transformer be used?
Please,is the coiled wire copper or aluminum?
how can you tell that it is 300 amps...sorry if thats a dumb question
hlw sir
core size ?
Check description
ना bobin की साइज़ के ना core साइज़ ऐसा नहीं चलेगा नो लाइक
You have to come out of your winding at different places to be able to adjust the amperage..And it helps to know how to weld..If the surface had been prepared..you may could kept the arc going..
Very good
Thanks
Good trick
By increasing turns ratio, can decrease secondary open terminal voltage to 40 volt and hence, can get better current and voltage ration to melt the welding rod. Size of welding rod seems to me, 2.5 mm and it needs 75 A and 22 volt minimum to do welding. For 220 volt input, primary turn should be 264 minimum.
How many voltage
Agr by mistake earth wale wire ko touch ho gya current Lage ga?
Very good 👍
Thank you 👍
Very good video
Thanks
Good
Thanks
Sir can it shock the hand?????
no
@@MULTIELECTRON Sir, why did you not touch the iron without plier.
@@drawingexpression because yes it can shock you. It can actually very easily kill you. Don't attempt this if you're questioning if it can shock you.
Bhaie etni dair laga di ap nay patri laganay main
Nice
guru iss line me kab se ho suru
मूझे घर परही वेलडींग मशीन बना नी है केसे बनाऊ ?
kitna number ka Bobin ?
what size of wire and how many turns?
Wire size secondare wire no 16 turn 180
Primary wire no 9 turn 48
Bhai kya ye welding macine carent marti hai
What is the core size.primary winding swg turns.and secndre
Bhai ye supply kitni power ki hai
3000 watts 220 volt
hi. broo. please tell me. core size
What a primary wading used
Nice videos.
Many many thanks
How menny ampers transformer?
out put me konsa curunt ayega
बेलडींग transfer waindig vidio
how much turn didn't show
Kitna no ka rod use kar sakta hain or kitna time tak use kar sakta hain
Iska data kitne gage kitne turn
Sir 48 volt battery charger ka welding set ban sakta hai?
How mach turn is swr
300a no the transformer size cant deliver that amount of power
It can, it's not the matter of amps, but the matter of power V x I
Namaste sir ji
Mein Malegaon Nashik Maharashtra State se hu
Sir Tar number Aur Bobbin size Core
Size Aur Turn kitne hai sir
Mein Automatic stabilizer Bana ta hu Aur cell karta hai sir ji
300 Ampere ?
Saya tidak yakin. Coba di tes dengan Amp-meter.
Price? Kia aap bhej sakty hyn?
Ok brater
i think that is good job, because in DC welding machine out put volt is 62-78, so if i calculate his turn ratio he will get 68.33 volt, if i calculate transformer loss then he will get minimum 58 volt with is better for welding. But that is not heavy duty, but not bad.
बायडींग कैशे कीया है
How to perchace core
What's the output of this transformer pls
55 volt
You guys have to start from the scratch so that wee will understand what you're doing
Watch part 1
Super
Thanks
Video wait time in putting E and I
Ustad ye 220 volt pe chal raha hey
yes 220 volt
Is there a link for the materials used and a materials for DIY transformer?
Bobin size.
Show from starting point
Wher is your data
How many turns each... Primary & secondary??
turns and swg and core size, please
Como puedo viajar le anperage a unsoldador de dos veinte boltio
What is the core size?
Primary winding SWG turns?
Secondary winding SWG turns?
Wire size secondare wire no 16 turn 180
Primary wire no 9 turn 48
Sir iska data bataye na please
Tar number kya hai aur tarny kehtni hain
Calculate
All information ??
Wire kitna swg. Turn ? so very bad
Hum na samajh paye.
درست کردن ترانس ۱۲ ولت
Ok
harif nw
सर जी लूप कहां गई पहली क्वायल की
Dc 55 voltage sir ji
thank you
Nober coil
Data kya hei no laik Nahi milega
amper10
Input 220v AC he aur output 300A he par output kitne volt AC he? Sirf music sunai de raha he voice bhi to dalo.
चूतिया बना रहा है केवल.... ज्यादा से ज्यादा 2 या 4 वोल्ट ही होगा
Rapaz que caras mal educado! Não fala o fio que tá usando as voltas, vídeo malfeito, vou sair da escriçåo
shok
কোর কোথায় পাবো
Your winding wire size , transformer size not allow 300A. Please 😅
How many volts