Once again, big thank you to Yokohama Tires in Switzerland and Weds Wheels in Japan for Supporting my products! Make sure to check out their awesome products!
Hi, thanks for your comment! Regarding the price it will depend on what country you live in. If you are in Europe, I can hook you up. If you want a lot more details, you can check my video of the suspension installation and test: ruclips.net/video/fS55-DIJ_D4/видео.html
Hahaha! That guy is me and I did that because I was cutting the camera through my watch and also checking if I was in the frame through my watch. I guess not the same reasons as our friend Joe Biden hahahaha 🤫😂
Hi Chris! In all honesty, that was one of my concerns. However I have seen quite a few very well know Tuning shops in Japan using this setup. I had the square one before and I thought I should give the current setup a try, since on the MR2 zzw30 Platform it was actually against the grain of what the stock car had and many tuners had too (aftermarket setup). After a bit more driving, I realized that I actually didn't loose any grip. I actually gained stability on bumpy mountain roads due to the decrease of Non-suspended weight. I did feel a slight slack or slightly less sharp turn in, but I am wondering if thats just the new tires. And maybe do a more agressive Geometry too! I still have to go on track to give my final opinion. But in general other than the slightly less sharp steering feel (very slight) I can't feel any down sides... Its funny but I actually feel an increase in pickup when reaccelerating and under braking I feel the brakes react quicker... What 1kg per side can do is quite amazing!
5 Kg la jante...et 8kg le pneu...Quand il s'agit de masses non suspendues, on va toujours évoquer le poids des jantes, mais celui des pneus n'est pas à négliger, car il peut différer énormément ( à taille équivalente) d'une marque/modèle à une autre. Malheureusement, ce n'est pas une donnée que l'on retrouve facilement sur la fiche descriptive de ceux-ci, or multiplié par 4, un kilo de gommard en plus, ça peut vite jouer sur un set-up complet.
You're a good Pappa! Nice comparison too.
Thanks man 😁👍🏼
I want to have the same setup for mine. Looks good.
Thanks man! Depending on where you are im the world i might be able to hook you up 👍🏼
Once again, big thank you to Yokohama Tires in Switzerland and Weds Wheels in Japan for Supporting my products! Make sure to check out their awesome products!
I recently got 17x9 and 16x8. Debating going to 15s but don't want to spend money again. K24 zzw
I actually did both and tested both on my zzw30 2zz swap and Lotus Elise 111r. I prefered the 15/16 setup
Can you tell us more about the bracing that you have on your car, fell and price etc.?
Hi, thanks for your comment! Regarding the price it will depend on what country you live in. If you are in Europe, I can hook you up. If you want a lot more details, you can check my video of the suspension installation and test: ruclips.net/video/fS55-DIJ_D4/видео.html
This guy looked at his watch more than Joe Biden. Other than that, great job. Nice looking wheels.
Hahaha! That guy is me and I did that because I was cutting the camera through my watch and also checking if I was in the frame through my watch. I guess not the same reasons as our friend Joe Biden hahahaha 🤫😂
Very nice wheels!
Why did you move from a square setup to staggered one ? You are not afraid to lose front grip on track ?
Hi Chris! In all honesty, that was one of my concerns. However I have seen quite a few very well know Tuning shops in Japan using this setup. I had the square one before and I thought I should give the current setup a try, since on the MR2 zzw30 Platform it was actually against the grain of what the stock car had and many tuners had too (aftermarket setup). After a bit more driving, I realized that I actually didn't loose any grip. I actually gained stability on bumpy mountain roads due to the decrease of Non-suspended weight. I did feel a slight slack or slightly less sharp turn in, but I am wondering if thats just the new tires. And maybe do a more agressive Geometry too! I still have to go on track to give my final opinion. But in general other than the slightly less sharp steering feel (very slight) I can't feel any down sides... Its funny but I actually feel an increase in pickup when reaccelerating and under braking I feel the brakes react quicker... What 1kg per side can do is quite amazing!
@@JesseSpec agree, lotus Elise even did a 16*5.5 in the front and 17*7.5 in the rear. Crazy but it definitely means something
@@灰灰-d9f exactly! Honestly this setup performs amazingly! Love it 👍🏼
@@JesseSpec do you still remember your offset? My friend kept telling me the front and rear need different offsets.
@@灰灰-d9f 15x7 +35, 16x7 +36
Looking good! 🔥🇨🇭
Hi Jesse what ET offset are the 15" & 16" Wedsport wheels you fitted?
Hi, offset 35 and 36
Hast du eine Vorschlag für meine mr2 spyder guten felgen in der Schweiz.
Danke für deine Nachricht!
Wedssport! Mit meiner Firma kann ich dir welche besorgen mit CH Gutachten Natürlich ;-)
@@JesseSpec Bestehen Erfahrungen ob solche Gutachten für die Schweiz als Vergleich für den TÜV in Deutschland genommen werden können?
@@2zz98 Ja du kannst deine Felgen bei Weds-Wheels Europe bestellen. Die werden dir bestimmt helfen können die Felgen strassen tauglich zu machen.
5 Kg la jante...et 8kg le pneu...Quand il s'agit de masses non suspendues, on va toujours évoquer le poids des jantes, mais celui des pneus n'est pas à négliger, car il peut différer énormément ( à taille équivalente) d'une marque/modèle à une autre.
Malheureusement, ce n'est pas une donnée que l'on retrouve facilement sur la fiche descriptive de ceux-ci, or multiplié par 4, un kilo de gommard en plus, ça peut vite jouer sur un set-up complet.
En effet! C'est pour cela que j'ai voulu justement mentionner le poids total pour donner plus de concret :-)
Great video:
But just wanted to verify your tire size.
Front : 195/50/15
Rear: 195/45/16
Is this correct?
Thanks man! Front is correct! Rear is 205 45 R16 😊👍🏼
elles sont homologué les jantes, ou faut les faire homologué ?
100% homologué
@@JesseSpec Hmm pas mal, je vais regarder si je trouve pas des jantes bbs look vintage
😊😊👌
Arigatou gozaimasu!