Dude.... WHAT ARE YOU DOING?? lol. No joke. You have perfectly good solid wood there, you do NOT need those stupid inserts. Just screw into the wood! It would have been stronger that way.
@@SlickSticksWoodworks they're not though. if you had installed them on the bottom sure, but those short little inserts are going to pull out easier than a proper length wood screw.
@@woodshrew With the exception of the last sentence, you gave a great answer -- informative, educational. I didn't know about this, but it sounds intriguing. Thanks for the info.
As someone who grew up using tools not for what they were designed for, but for what i needed to get the job done. I say excellent work. Their could be changes made with better results. Once again excellent project.
I like it, but I think it would look 👀 better with it on the bottom.😊 Edit: Oops, I had to read all comments to find out that was your intent. 😮 But I think you should clean the iron, especially the ends, before calling it done.😊
Если бы мой батя увидел, что я молотком бью по сверху, вместо того чтобы взять что-то нибудь типа: шила, гвоздя или чертилки. То мне таких бы пиздюлей выписал и ещё бы и не жадничал )
На хера он это сделал? Что для красоты, да понял... А практичность, Смысл... (Ну что гений, сдулся? Думал мне нужен ответ от тебя что небо синее?) В общем тема сисек не раскрыта :)
Umm, this is not going to end well. As the wood expands and contracts it is definitely going to crack. If the angle iron was slotted instead of having holes, this could be avoided.
Я так и не понял, для чего все эти манипуляции? Может быть у них там в Ю.Восточной Азии так принято? В России это делают гораздо проще, да и надёжней. Я так думаю👍
The comment section never ceases to amaze me! Could be a video of something that blows you away, by how ingenious or innovative it is...........followed by a hundred comments about what fuckin idiot they are, because they shoulda done it this way, instead
@@jrsmith3344maybe that’s because you don’t know how to do woodworking. Just because a comment is negative doesn’t mean it’s wrong. Some people just don’t care to sugar coat things.
@SlickSticksWoodworks ok but your client should just tell you what he wants as a finished product, not how to achieve it. Sounds like they're micro managing to me because the full depth wood screws would really hold better than those little screw in anchor plugs in my opinion
Why inserts though…. Unless you need to take it apart a lot, there’s really no point to use them in real wood.
And even recess, the edge of the table so that the angle iron fits flush to the bench top surface
Yeah boi
Or leave as is and just place a sheet of glass on top of the wood then all will be flush and give the wood some protection
@@paulhaynes1314glass is expensive and would trap water 💦
@@burner5673 then seal it 🤷🏼♂️
@@paulhaynes1314😮😢😅😂
Using a drill bit is a bad idea as it can shatter and impail the eye's. It happened to a friend of mine.
😳
Your friend is rtrded you gotta put some serious force to break a drill bit that size
@@chasethegreatpalmer8990yeah because no drill bit ever has had a default...
He isn't hitting it with force, just enough to make a mark. He is too lazy to grab a pencil😂
Safety glasses???
Как только начал сверлом кернить😂😂😂 Всё учитель ты проиграл😢😢😢😂😂😂😂😂😂😂😂😂
Сверлом кернить ? Я бы его за свёрла закатал в этот набор 🤯😏
Heck yeah
Looks great! These other comments are haters, bet they don’t even HAVE outdoor tables.
😂 thanks!
Такого бреда ..нет и не БУДЕТ
Dude.... WHAT ARE YOU DOING?? lol. No joke. You have perfectly good solid wood there, you do NOT need those stupid inserts. Just screw into the wood! It would have been stronger that way.
False
I would have used flush sitting countersunk screws instead of dome heads..
Yeah these are just what I had. It’s on the bottom so you’ll never see them anyways
That is a good idea though
Снизк бы и закручивал не портил внешний вид..) ох и бред
и зачем человечество изобрело сверло для конфирматов. там 3 в 1.
I understand you can’t fix stupid but you might want to clamping down before you start marking all the holes
😂 thanks for feeding the algorithm
Sure no problem
Hopefully that is the bottom of the table
Yes it is. Mounts to a whiskey barrel
Clamp it in place first
Nah. No need to
Why not just screw the frame to the table. What’s the point of the other fixings.
I had considered it. Mostly because threaded inserts are more secure.
@@SlickSticksWoodworks they're not though. if you had installed them on the bottom sure, but those short little inserts are going to pull out easier than a proper length wood screw.
Buy a nail punch
Will you buy me one? I’m busy
@SlickSticksWoodworks sure what brand would you like?
Checked out the moment a drill bit was used as a centre punch 🥲😅 what's wrong with a bradawl?
Couldn’t find my center punch. Important part is, it worked
@@SlickSticksWoodworks
Any port in a storm 😅...make a mistake on the internet and you'll cop heat way in excess of the error or perceived sin
How to ruin a drill bit.
Was already broken. So it’s actually how to repurpose a drill bit
Countersink the insert and then uses pan head screws…hope that’s the bottom.
Yep. It’s the bottom of the table
I was wondering the same, alot of work to do just to throw those screws and a plain ol piece of angle but it's their build
My guy! 🤦🏼♂️ a drill bit is not a center punch! 😤
😂 tonight it was.
and your mom's not a great lay, but she gets the job done.
@@creepyloner1979😂😅
Wake up and get with the program! It identified as a center punch.
You do know you can use old drills for that, i do :D
Soon, they will discover how much wood expands and contracts. They haven't allowed for seasonal movement of the wood.😢
I’m having some seasonal movement right now. Tell me more…
Yea, this is going to break itself so bad
I was wondering about that, too.
@@woodshrew With the exception of the last sentence, you gave a great answer -- informative, educational. I didn't know about this, but it sounds intriguing. Thanks for the info.
А просто на саморезы прикрутить нельзя было?
Yeah. These are more secure
Можно и на гвозди, но он сделал так.
What is the point of this?? You’re not allowing for wood movement which means it’s eventually going to split where you drilled your inserts
Ehhhh I’m not so sure about that but maybe.
Кернить сверлом? Сильно
Caterpillars smell weird.
@@SlickSticksWoodworksтак не надо нюхать в районе жопы.
А чë, так можно было? Кернить сверлом... Ну да, в конце концов лучше кернить сверлом чем сверлить керном... 🤗😁
Heck yeah man
@@SlickSticksWoodworksстесняюсь спросить, а для чего на этом столе железо?
Верстак или ещё что?
@@АнтонНовиков-х2ддля видео наверное😅
@@АнтонНовиков-х2д забей
I do not understand…. What for he did it? What is the purpose ? Explain me please
Did it for money
Furchtbar
😂
No sabes trabajar ¡ Cómo es posible que utilices una broca como marcador !... Para eso existe herramientas para cada cosa ha utilizar 🤦
Holes slightly too large for those inserts, and should glue them in.
Typical RYOBI power tool users lol
WTF! Rustable angle iron, not aluminum for outside table-doh!
The iron is supposed to rust 🙄
As someone who grew up using tools not for what they were designed for, but for what i needed to get the job done.
I say excellent work.
Their could be changes made with better results.
Once again excellent project.
Best comment of them all! Haha thanks
Розумні люди користуються керном
Exactly!
I like it, but I think it would look 👀 better with it on the bottom.😊
Edit: Oops, I had to read all comments to find out that was your intent. 😮 But I think you should clean the iron, especially the ends, before calling it done.😊
Yes. Absolutely. Last thing I’d want is for someone to scratch themselves. That metal is shar
You can clearly see how "professional" somebody can be when they się a drill as a center punch...
Or when they make pointless comments
Graneteas con la broca?, eres un crack tío
This isn’t woodworking it’s Ikea assembly.
😂 you sure?
Какая разница, если бы сделать и на угольнике подтай и закрепить уголиьник саморезами? Много суеты и двойная работа.
Client wants the client wants 🤷♂️
It’s oak not some particleboard, why inserts and recess the angle for a cleaner look🤔
Client wanted it to match the whiskey barrel they used for a base. They wanted the rougher rustic look
Monday morning quarter backs on these comments!!
The best part is it feeds the algorithm. I should thank them for the exposure 😂
Give this guy a charger so he keeps charging he's Ryobis
Very constructive comment. Thank you for the input
Did anyone else notice that he used a drillbit as a punch
It’s brilliant right…. 😂
Terrible, every work, also not in the right angle!
😢 i guess ill quit. Can’t possibly operate if you of all people thing it’s awful.
How will I ever go on???
Hey kids. You just watched a tutorial on what not to do
Hey kids he just commented and fed my video further into the algorithm! Thanks
Если бы мой батя увидел, что я молотком бью по сверху, вместо того чтобы взять что-то нибудь типа: шила, гвоздя или чертилки.
То мне таких бы пиздюлей выписал и ещё бы и не жадничал )
Your dad sounds suspect
IKEA entered the chat.
😂
Look at the drill that will tell you why,limited tools rioby
😂 thanks for feeding the algorithm
To what end the angle iron?
I dont see the reason for it?
Client wanted it to match existing base. Old whiskey barrel
Did it this way so he would get comments.
Thanks for commenting!
Специалисты блин сверлом керните битой сверлить технологично
What is the purpose of that angle iron?
Matches the bands on the whiskey barrel that it mounts to for a base
@@SlickSticksWoodworks Oh I see. 👍🏼🍺
На хера он это сделал?
Что для красоты, да понял...
А практичность, Смысл...
(Ну что гений, сдулся? Думал мне нужен ответ от тебя что небо синее?)
В общем тема сисек не раскрыта :)
Boobs are way better. They always win
was macht er da ??? what is he doing there ???
The Macarena
It's only a bench so yea its only a bench .
Basically. It’s cool for what it is
😊 show
Drill bit as a punch. And putting a cold metal edge on top of a table. 🙄
Read the comments. It’s the bottom of the table 🙄
@@SlickSticksWoodworksIt will catch lady's nylons then. 🙄🤣
Надо было лаком то капнуть в отверстия перед вкручиварием
Nah they hold pretty well
С самого начала делает через зад, специально что ли ?
Yes on purpose. That’s the bottom of the table
This raises more ? Than it answers.
Such is life my friend, such is life
Couldn't he just use woo screws?
Yep. But the threaded inserts are more secure
Until that angle rusts and bleeds
That’s the point
Как то непрофф. Закрутил бы обычные саморез, хуже бы не стало. А тут зря потраченное время
You sure?
Don't hammer a drill bit
Don’t tell me what to do
@@SlickSticksWoodworks just pointing out the stupid
Didn’t countersink the angle iron screws. Poor job.
Wrong
Je centert niet met een boor
Daar is speciaal gereedschap voor .
Worked 🤷♂️
@@SlickSticksWoodworks yes but your are on you tube . Do the thing so belong . Take the rich tools . And don.t learn them the wrong way .
Why doesn't he inset the angle?
I wanted to but client wanted everything rough looking. They even wanted the angle to rust so it matches their outside furniture
A drill is not a centerpiece😂
Who says?
No era mas facil solo poner tornillos?
Definitely would be easier
Umm, this is not going to end well. As the wood expands and contracts it is definitely going to crack. If the angle iron was slotted instead of having holes, this could be avoided.
Allegedly
А зачем кернить сразу сверлить можно.
So wood doesn’t split
Mit dem Bohrer du droll echt jetzt 🙈🙈🙈🙈
Heck yeah I totally agree
У них нет саморезов с пресс шайбой?
Yes
@@SlickSticksWoodworksкатастрофа!! 😂😂
Cool idea with the drill bit. I'll go him one better: I sacrificed an Allen wrench and cut it off so it fits in my drill to speed up screwing !
Hell yeah. I did that for a swing set in the back yard. Works great
Metal should be recessed below the surface of the table. And it needs a protective coating (paint, etc) so it won't rust.
Well Sam that’s awfully bossy of you
What are those inverted screws or dowels called?
Threaded inserts
@@SlickSticksWoodworks 👍
What is that. Please tell me
Wood
Клсс, сверлом дерево накернил😂
Heck yeah
Я так и не понял, для чего все эти манипуляции? Может быть у них там в Ю.Восточной Азии так принято? В России это делают гораздо проще, да и надёжней. Я так думаю👍
😂😂😂 jajaj nomms es mejor directo
Heck yeah
Why do the metal down.. put it up and drill holes for the legs? That's a crazy table like..
Metal goes down. It’s smooth and flat on top. No legs. It mounts to a whiskey barrel for a base
Wrong wron wrong......
Wrong wrong wrong***
Good 👍
Thanks
I hope you treated or painted the angle iron. It is going to rust like crazy and mark your job.
No. So it’s an outside table with an old whiskey barrel for a base. He wants the metal to rust to match the barrel
Просто саморезы завернуть, тот же результат.
Not exactly.
Why not just put wood screws in
Strip out over time.
That's true
Use a vix bit here.
Heck yeah
Looks great , but with time some of those screws could eventually shear off as the planks expand and contract
That’s a solid point. I’ll keep it in mind if I make another
I think enlarging the holes in the angle iron could help with that, gives the wood some room to move around
@@SlickSticksWoodworks😅
Странно что при наличии такого количества инструмента отверстия в дереве размечаете сверлом😢
Could find my missing center punch. Had to improvise
А что нет шестигранной биты😂😂😂
Someone broke in and stole it! Can’t believe it but that’s the only thing they stole
All holes were crooked!
Noooo! You weren’t holding your phone straight
The special part about this video was being able to push the button to collect the clicks.
Heck yeah! 👍🏻
Terrible job
Your mom loves it 🤷♂️
Can’t believe all the criticism and negativity, I love the look!!! Who says that there is only one right way to do anything??
👏
The negative comments don’t bother me. They keep the video in circulation and I get more followers haha
Only saying could have used stainless steel to make it look nicer
The comment section never ceases to amaze me! Could be a video of something that blows you away, by how ingenious or innovative it is...........followed by a hundred comments about what fuckin idiot they are, because they shoulda done it this way, instead
@@jrsmith3344maybe that’s because you don’t know how to do woodworking. Just because a comment is negative doesn’t mean it’s wrong. Some people just don’t care to sugar coat things.
Don’t worry. That angle iron won’t rust outside with no paint on it. 🤔
Not worried. That’s the point
Хотел сдуть опилки не получилось)
Hahahaha next time
Could find center punch. Had to improvise
Exactly
are the screw anchors even necessary? why not just pre drill for 1-1/4" wood screws😮
It’s what my client wanted
@SlickSticksWoodworks ok but your client should just tell you what he wants as a finished product, not how to achieve it. Sounds like they're micro managing to me because the full depth wood screws would really hold better than those little screw in anchor plugs in my opinion
And?
Heck yeah
Why?
Why not?
Step 1. Throw away cheap drill.
Step 2. Come up with a better comment
Супер😊
Thanks!
After recessing don't forget to use stainless steel angle so it won't rust
I mentioned that to the client but they want it to rust to match the bands on the old whiskey barrel they’re using for the base