Top 5 Armies To 3D Print For Warhammer 40k

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии • 151

  • @Tinytraveler
    @Tinytraveler 2 года назад +61

    I just recently printed an entire Deff Dread army for Orks. 9 Deff Dreads, 6 Killa Kans, 1 Mega Dread, 2 Dakka Jets and a Beastboss on a Squig. Likely my most favorite army, looks amazing, and noone even bats an eye or asks if they are printed, cause its Orks and its so perfectly fitting.

    • @battlebrothersam
      @battlebrothersam  2 года назад +4

      ORKZ is da best 😁😁

    • @Mentalfirmware
      @Mentalfirmware 2 года назад +1

      Which printer did you use for this army?

    • @alainspirit2565
      @alainspirit2565 Год назад

      Where’s you find these? Everywhere I look there’s generic orks without any data on what they are or what unit they are

    • @jakeosiris3971
      @jakeosiris3971 Год назад

      @@alainspirit2565 i found a bunch that look cool but im not sure what unit they correspond to the game, i mean i guess you can make them whatever.

  • @ima1hpwounder580
    @ima1hpwounder580 2 года назад +41

    Honestly my only intention for printing for 40k would be extras pieces for adding on, cause i feel like the money that i would be spending on getting the offical models would be through local game stores, but i can see the pros and cons of this whole side of the hobby, especially when it comes to making unique minis and additions, so maybe after i get into 40k proper with my first army ill give this a look at

    • @battlebrothersam
      @battlebrothersam  2 года назад +10

      It will start off with bits and pieces but being able to print whole armies is just too tempting brother lol

    • @evilabelincoln3787
      @evilabelincoln3787 2 года назад

      i started getting a good amount of guys into 3D printing at my shop to the point that they started carrying resin there now at a not too horrible mark up. Its worth the price if you need it that day.

  • @trevorm2252
    @trevorm2252 Год назад +5

    I normally don't comment but I just have to for this guy he has sparked the joy that this hobby brings me. I can't thank you enough.

  • @NikiGothBunneh
    @NikiGothBunneh 2 года назад +27

    Imperial Guard come to the top for me because 3d printing is literally the only way to do some of the options that GW doesn't make (and to be fair I mix official bits, 3rd party plastics and resins, and 3d printed bits for my various things.)

    • @battlebrothersam
      @battlebrothersam  2 года назад

      Good choice what regiment?

    • @evilabelincoln3787
      @evilabelincoln3787 2 года назад

      thats how i was able to do Elysians again. They were my first army and i sold them. Found great STL files for them and printed an army of them again.

    • @pwntehnoobs
      @pwntehnoobs 2 года назад

      @@evilabelincoln3787 you got a link for the elysian stls?

    • @evilabelincoln3787
      @evilabelincoln3787 2 года назад

      @@pwntehnoobs won't let me post links some reason, but cults3d look for "Elysium rifles", and Myminifactory search for "Airborne Division Imperial Force."

  • @S1lentJo
    @S1lentJo 2 года назад +12

    Very nice Trickery you got going on there Brother!
    The best one to Print would either be the most expensive ones or the one that consists out of the most OOP models. Or maybe the ones that are consistently out of order.
    That just won't happen with a Printer.

    • @battlebrothersam
      @battlebrothersam  2 года назад

      Lol glad you liked it brother! Oh yes OOP would definitely be up there with the best to print

  • @therealdoobs5655
    @therealdoobs5655 Месяц назад +1

    I'm so glad I watched through the end of this video. What army should you 3d print? The one you like." Reminding me when looking into this hobby that it's not about always winning and as a starter do something that looks fun to me. Thank you for this video!

  • @shaded0ut286
    @shaded0ut286 2 года назад +19

    When I had my 3d printer I printed out 20 chaos Legionaries and I loved every second of it. Got my hands on a stl pack for termies

    • @battlebrothersam
      @battlebrothersam  2 года назад +1

      For Chaos! I've slowly been adding to my chaos marine force with the printer

  • @williambond2267
    @williambond2267 2 года назад +10

    Space Marines seem to me like the best army to print because there are so many options from full minis to just bits to make your own marines. On a side note I think there need to be more 40k scale Titan files (multi-part) mainly cause I wanna build my “Sonic Titan” for my Noise Marine Army.

    • @battlebrothersam
      @battlebrothersam  2 года назад +1

      There are very few titan makers at the moment which is a shame

    • @williambond2267
      @williambond2267 2 года назад +1

      That is a shame. I found a pretty good warlord while surfing the inter webs and some bits to make it into my aforementioned “Sonic Titan” but I can already tell it’s gonna be a slog. Worth it. But a slog none the less.

    • @williambond2267
      @williambond2267 2 года назад +1

      Correction….it’s a Knight….But you best believe I’m gonna scale that boy up.

    • @battlebrothersam
      @battlebrothersam  2 года назад +1

      Oh is it the ghamak one?

    • @williambond2267
      @williambond2267 2 года назад

      It is not but because of the nature of our situation I don’t wanna reveal who it is. You never know who’s reading these and I want to keep these artists as safe as possible.

  • @Chieftian101
    @Chieftian101 2 года назад +1

    Just went and dusted off my Mars 2 Pro and I've been printing out a batch of Wraithguard units, planning on making an Iyanden army for my first army

  • @K1LL4Cam
    @K1LL4Cam 8 месяцев назад +1

    I've been printing a Death Guard army, but I don't have an SLA printer, so I've been using my Prusa Mini, and I have to say, I am surprised by the detail. Granted, it's nowhere near the resin prints, but using .7 or smaller detail settings produced, mostly clean, barely visible print lines, albeit, small details are lost or muddy. I will say, I am def wanting an SLA printer now, and have been looking at a Saturn 2, and considering it costs as much as a combat patrol, I'd say its a good investment. I'm going to finish my FDM printed army, then make a master army with SLA, or maybe combine them for an epic army, but I will have to see how the FDM prints come out after painting. I will say, finding most of the files or proxies for Death Guard was not too hard, and have enough nurgly bits to kitbash most other models into the loving embrace of daddy Nurgle.

  • @mig1739
    @mig1739 9 месяцев назад +1

    I'm surprised Orks did make it on the list considering games workshop was unable to copyright them in court. So there are an absolute insane amount of orks STL files available.

  • @fallen1805
    @fallen1805 Год назад +1

    Are a lot of the 1-1 clones taken offline as of now ?
    I was thinking about resin printing but if most clones are off the market then maybe not
    Lmk

  • @DrVesuvius70
    @DrVesuvius70 2 года назад +10

    The thing about orks is that their motivation in-universe exactly matches my real world motivation to play wargames. Orks don't really care about winning or losing, they want to have fun getting into a good hard scrap. The fight itself is the thing. As a non-competitive wargamer, I just want to play a game and have fun. I want to charge my Light Brigade at the Russian guns to see how far they get. I want to WAAAAAAAAAAAAGH! It won't matter to me if my Orks aren't going to be the winning-est army. I get to talk funny and make loud dakka-dakka noises and slap together bitz and gubbins into Orky terrain and vehicles. And that will make me a happy wargamer.
    But hey, if playing Tau or Eldar or shiny Space Janitors make you feel that same way, then have at it!
    And yeah, I wholeheartedly concur with the final point in this video. One of the big wins in 3d printing is that it does open up the possibility to try so many different armies at a reasonable cost. A bottle of resin holds so many infinite possibilities to choose from.

    • @battlebrothersam
      @battlebrothersam  2 года назад +1

      doc, brother, when you wrote it in the discord I was genuinely shocked! lol very excellent reasons to play DA GREATEST BOYS.

  • @Zakading
    @Zakading 2 года назад +1

    With certain mini ranges, the process of cleaning stuff off and in some cases having to do supports can honestly be such a pain in the rear that I'd rather just grab things secondhand for cheap. Other times, especialy when anything FW is involved, though, then printing for sure is the only right call.

  • @jayvis123111
    @jayvis123111 2 года назад +2

    I'd love to be able to actually find most of these models.

    • @battlebrothersam
      @battlebrothersam  2 года назад +1

      Brother not to shamelessly plug but the discord is full of knowledge for this 😂😂 it's open for patreons and youtube members

    • @jayvis123111
      @jayvis123111 2 года назад

      ​@@battlebrothersamYaknow brother, I'll be honest, on one hand, I'm totally for paying you it takes so many hours to find free minis that it wouldn't be an issue even for my broke-butt. On the other, calling me brother really tells me who was in mind when you made that Patreon. Can I get anything that tells me you did or will in the future think of others? (see, goobertown hobbies for inspiration, I see you're a fan already)

    • @poggestfrog
      @poggestfrog Год назад

      @@jayvis123111 he's called battlebrothersam i think it's an rp thing

  • @spuriusligustinus4509
    @spuriusligustinus4509 2 года назад +3

    You got me there lol
    I was thinking Imperial Guard or Orks as there is a lot of choice and they are by far the most customisable armies out there.
    And a lot of it for free

    • @battlebrothersam
      @battlebrothersam  2 года назад

      lol glad you liked it brother! really the number 1 spot is so hard to narrow down! orks, guard, marines all have enough free files to make multiple armies out of each one

  • @Schyzofrenic87
    @Schyzofrenic87 11 месяцев назад

    i like printing guard because a lot of old regiments are no longer available but with a printer the sky is the limit

  • @Joe-pu2bt
    @Joe-pu2bt 2 года назад +5

    Craftworld eldar & dark eldar have SOO many amazing sculpts in stl's! Also a box of 5-6 space elves from GW costs more than a bottle of resin! 3d printing has saved my $1000's at this point.. for better looking minis lol

    • @battlebrothersam
      @battlebrothersam  2 года назад

      I have a good few gb of files for eldar and dark eldar your right so much better sculpts available

  • @shadowshandbro
    @shadowshandbro 2 года назад +5

    I plan on printing the Imperial Fists for the Horus Heresy! I have been collecting STLs in preparation of purchasing a Egeloo Saturn 2 in 8K resolution. 😅 My favorite STL I have found has been a near exact replica of the Rogal Dorn Forgeworld model!...

    • @battlebrothersam
      @battlebrothersam  2 года назад +1

      I know the exact one your talking about.. It will look epic on the saturn 2! One of my patreons has it and the pictures he sent in the discord are making me want one now lol

    • @outryder6929
      @outryder6929 Год назад

      Where do you find your stls? I’m having no luck, do you use different search terms than just the factions name?

  • @Hoody1147
    @Hoody1147 Год назад

    Mannnn, how do you get rid of your print lines on these larger models? I still get little lines with my resin printer!?

  • @morycmoryc4145
    @morycmoryc4145 2 года назад +2

    Alredy printed nurgle deamons from EmanG, VC from highland miniatures, Chaos from Titanforge, Lizardmen from OPR,
    ....time for 40k :P

    • @battlebrothersam
      @battlebrothersam  2 года назад

      I'm going to swap with you and start on AoS soon lol

    • @morycmoryc4145
      @morycmoryc4145 2 года назад

      @@battlebrothersam hehe since 1995 i was always mor of an fantasy/historical kind of gamer :) You should mention printing minis for historical wargames. Bolt action, SAGA, just to name a few. Got a lot of that :)

  • @eriksegura3190
    @eriksegura3190 Год назад

    I have looked and am new to this, but how do you search up the different factions, i look up space marines ou tau and rarely get any hits

  • @swakage13x
    @swakage13x 5 месяцев назад

    I'm just about finished with a thousand points for grey knights and right now I'm trying to decide between doing iron warriors or sisters of battle and I've already found all the files I need I just need to get some money to pay for the resin for my brother to use in his printer for me but thankfully this weekend my brother and his fiance are going on a trip and they're going to have me watch the house and check on the cats and my brother is going to pay me in printing some models for me, because in his group of friends that when they get together every other Saturday to play no one uses chaos other than technically Drukari and another one of his friends that plays tyranids otherwise it's necron and space wolves and custodes

  • @icklemoo
    @icklemoo 2 года назад +1

    my favourites so far have been chaos daemons and leagues of votann , plus loads of space marine stuff like grey knights/gravis style stuff .. orks are just everywhere as well

    • @battlebrothersam
      @battlebrothersam  2 года назад +1

      Chaos Daemons will always be high on my lists of favourite armies they are just so cool

    • @icklemoo
      @icklemoo 2 года назад

      @@battlebrothersam Yeah I am loving my nurgle demon list in 1k and 2k .. its not super damage output as I run mono faction but I am having fun with it just wish nurgle had a few more units in the range for demons ..

  • @4_am
    @4_am 2 года назад +1

    Haha nice 1 with your pick of best army!
    The other great thing with 3d printing, you can also mod the stl's so you can have truly unique models

    • @battlebrothersam
      @battlebrothersam  2 года назад

      lol glad you liked it! oh yes 3d printing opens the doors wide open and once you start messing around in meshmixer its even better

  • @TheMonkeybacon
    @TheMonkeybacon Год назад

    Starting to print an admech army, I have so far printed one kastelan-parallel from station forge... Now just a bunch of skitari, some kataphrons, an onager, and maybe some knights to go 😅

  • @hobbithubby5076
    @hobbithubby5076 2 года назад +1

    Who’s the 3D modeler that’s doing the chaos daemons?

  • @davidflicker249
    @davidflicker249 11 месяцев назад

    I would like to get into 40k but i have no idea of how all this works. can i simply take the EmanG models (i am already subscribed to his patreon) and print an army and play? Don't they need like balancing and stat sheets and abilities?

  • @ComedicAlert101
    @ComedicAlert101 2 года назад +1

    even though space marines are the poster boys, they are still my favorite

  • @kajn3206
    @kajn3206 Год назад

    I like star wars a lot, so I liked har SW Legion, so I bought a Cis army starter, I printed almost the whole republic, about half

  • @Mushrouxmfungi
    @Mushrouxmfungi 2 года назад +4

    those great unclean models are beautiful. I bought the gw model and it's alright but the pose leaves a lot to be desired. I was in the process of trying to figure out how to kit bash it.

    • @battlebrothersam
      @battlebrothersam  2 года назад

      They are the best unclean ones I've seen and there is 4 poses

    • @elliotjoyce5854
      @elliotjoyce5854 2 года назад +1

      @@battlebrothersam where are people finding the free demons for nurgle?

    • @battlebrothersam
      @battlebrothersam  2 года назад

      @@elliotjoyce5854 cults3d brother, EmanG is the creator

    • @elliotjoyce5854
      @elliotjoyce5854 2 года назад +1

      @@battlebrothersam thanks for response

    • @battlebrothersam
      @battlebrothersam  2 года назад

      @@elliotjoyce5854 no worries brother

  • @battlebrothersam
    @battlebrothersam  2 года назад +1

    What could be the absolute best army to print?
    If you want to support the channel further then become a RUclips member or pledge to my patreon.
    www.patreon.com/battlebrothersam

  • @donniem7979
    @donniem7979 Год назад

    Answering at 1:48 my guess is Astra Militarum

  • @smoke264
    @smoke264 2 года назад

    where did you download the stl files for the custodes and the space marines?

  • @varthell
    @varthell Год назад

    just looking for a belisarius cawl file to print

  • @MrCitizen0
    @MrCitizen0 2 года назад

    I'm trying to find stl file for making a warhound for my dad's birthday

  • @MrCitizen0
    @MrCitizen0 2 года назад

    Where can I dl those custodes ?

  • @GRMW_BoardGames
    @GRMW_BoardGames Год назад

    I recently started playing 40K. I purchased 2 world eaters combat patrols, 1 demon prince and 1 Chaos terminator unit. Do you know any free or paid service to get files to complete my army. I recently got a resin printer and I would love to try it out. Also, if you have any other recommendations for other armies that are fun to play I would love to start printing those as well.

  • @xxelaxela333
    @xxelaxela333 2 года назад +1

    Check out Station Forge, Immense proxy potential

    • @battlebrothersam
      @battlebrothersam  2 года назад

      I used their grots for another video, very good stuff

  • @GeneralSturnn
    @GeneralSturnn Год назад

    Speaking about #1 reason
    I exclusively tell people to stop following the meta, if they want an army they'll be happy with(unless winning is all that matters, then by all means follow meta) but if you want to enjoy your army, find an army with an aesthetic you enjoy, lore, conversion, THAT is how you find happiness, I love my Orks and Guard and Squats more than anything, Orks are hard to play, but so much fun.
    I also made my own homebrew edition, 3 years in the works! My edition is called Warhammer 40,000; 41st Millennium Edition if anyone wants to check it out.

  • @warpwingminis
    @warpwingminis 2 года назад +1

    I recon space marines are best to 3d print, due to people's interest and the variation you can get in helmets/accessories etc

    • @battlebrothersam
      @battlebrothersam  2 года назад +1

      I would definitely rate them as an essential print brother

  • @Gunshow0
    @Gunshow0 2 года назад

    Can you 3d print Slaves to Darkness?

  • @rina-ehre
    @rina-ehre 2 года назад +1

    I think Space Marines are the best army. They are the posterboys and they get most credits from all creators, official or not, so you could choose from a lot of options to 3D-print.

    • @rina-ehre
      @rina-ehre 2 года назад +1

      I will print them, I think.
      And the Aeldari, the Drukhari, the World Eaters, and whoever else I want.

    • @battlebrothersam
      @battlebrothersam  2 года назад +1

      Print all the things!!!

  • @FrankieMankie
    @FrankieMankie 2 года назад

    I'm thinking between printing a Custodes army or go for Death Corp of Krieg. I have plenty of files for both of them and I already have a Space Marine army. Which one should I go for?

    • @landocamando4065
      @landocamando4065 11 месяцев назад

      I know it’s been a year lol. Is there anyway you can send me any of these files those are exactly the armies I’m building

    • @FrankieMankie
      @FrankieMankie 11 месяцев назад

      @@landocamando4065 I finally went for Death Guard. The files I had for Custodes and Dkok are outdated. There are way better files and scan now running around in different telegram groups.

  • @zmanzeta
    @zmanzeta 2 года назад +1

    I remember when I bought my Elegoo Mars 2 Pro... it was because I allways wanted a Warhound Titan and I saw it was much more cheaper to buy a 3D printer, a resin cure & wash machine and few liters of resin than buy the Forgeworld model. Adding to this I was worried about the quality of FW due the last miniatures I had from them were not perfect and I allways though that if we pay for something as it is made of gold, should have the best of the qualities but it's not the case in FW.
    From there I just printed a few 2k points armires just like you and I even painted some of them, just for the fun. I'm not against GW or FW, I even still buy from them things like paints, brushed and sometimes even a miniature I like, but last years I'm not very happy with the company and their predatory ways,.
    20 years ago, when I started in this hobby, this company was not like this. Nowadays, I think they kinda forced to people to follow 3D print ways, just like me.

    • @battlebrothersam
      @battlebrothersam  2 года назад

      It's definitely not like it used to be brother I remember feeling like I was a part of something not just another customer, FW with the pricing and their terrible quality is a shambles.

  • @pierrebalmain657
    @pierrebalmain657 Год назад

    1:29 : I would say the Astra Militarum (former Imperial Guard) because GW is dicking over this faction (along with the Eldars) ; although they are probably the one with the most (fluff) diversity.

  • @PeninsulaPaintingProjects
    @PeninsulaPaintingProjects 2 года назад

    I'm sorry to ask this question but I'm new to all this but I'm sorry to ask this question but is the best place to look for free stl, thingiverse ?

  • @Dorganthemorgan
    @Dorganthemorgan 11 месяцев назад

    What websites do you use?

  • @jamescococokelet6668
    @jamescococokelet6668 Год назад

    do you know of any scultors who would want to do an imperial guard but skaven style

  • @thepaintingfish7489
    @thepaintingfish7489 2 года назад

    My guess is demons for #1 1:50

  • @lordnovas
    @lordnovas 2 года назад +1

    I think #1 army is Death Squad imperil guys. I see so many of them.

  • @snartle
    @snartle 2 года назад +1

    the one you ranked 1st is the best by far

  • @chris-ri1zu
    @chris-ri1zu 2 года назад +1

    9 armies dam brother you have been busy. im still on 5 will be starting the sixth once i can get time time to do so.

    • @battlebrothersam
      @battlebrothersam  2 года назад

      Ah but brother my 9 don't compare to your 5 😂😂😂😂 Mr speed paint

    • @chris-ri1zu
      @chris-ri1zu 2 года назад +1

      @@battlebrothersam i hope i can get a few hours the weekend to paint. Its been a while now. im working Saturday but i have high hopes for sunday lol

    • @battlebrothersam
      @battlebrothersam  2 года назад

      Lol Sunday is the day of rest for some, for us it's the one day we can paint for more than a few hours if we are lucky lol

  • @miguelperez9906
    @miguelperez9906 2 года назад +1

    I still can’t get the sizes right

  • @drbeandog4209
    @drbeandog4209 2 года назад +2

    number one has to be guard

  • @maddogmadden23
    @maddogmadden23 2 года назад +1

    Chaos Daemons are by far the easiest. Like lots of 1 for 1. But there are endless numbers of proxies you could use.

  • @rathren575
    @rathren575 2 года назад +1

    I'm guessing space marines are number one. There are TONS of 3d printable space marine stuff on any 3d file site

  • @Jessforprez
    @Jessforprez 4 месяца назад +1

    Guardsmen! They are a horde army so you would save so much money!

  • @D3m0n7x
    @D3m0n7x Год назад

    im guessing Nids for the #1

  • @yagsipcc287
    @yagsipcc287 2 года назад +1

    Nice video bud also getting into HH?? hhmmmm

    • @battlebrothersam
      @battlebrothersam  2 года назад +1

      Thanks brother! Hmmmm hmmm hmmm well someone keeps posting their models in the discord 😁😁😁😁

    • @yagsipcc287
      @yagsipcc287 2 года назад +1

      @@battlebrothersam haha nice I need to do more. This week I was struggling to do anything. Gym was rough ha looks like you are doing Sons of Horus?

    • @battlebrothersam
      @battlebrothersam  2 года назад

      @@yagsipcc287 brother it probably didn't help you the turnaround from coming home from holiday to straight into work! I printed them so I have the option for sons of horus or possibly black legion I just have to decide on taking the plunge

    • @yagsipcc287
      @yagsipcc287 2 года назад +1

      @@battlebrothersam just so you know there is no black legion in HH. I think there are some units in Sons of Horus that are painted black a type of Terminator unit

    • @battlebrothersam
      @battlebrothersam  2 года назад

      @@yagsipcc287 oh yes I know lol the models are for chaos space marines but I used the horus versions so I could either paint them as sons of horus and use for 30k or paint black legion for 40k

  • @morycmoryc4145
    @morycmoryc4145 2 года назад +1

    And pls LETS SUPPORT CREATORS and BUY the files!! Better quality, presuported!! F*** GW , support resin!!

  • @fennoman9241
    @fennoman9241 6 месяцев назад

    4th planet battle doggo ftw. Or girlymans rowboat.

  • @jasonbeasy6007
    @jasonbeasy6007 Год назад

    My guess is the death korps of krieg.

  • @cwaldacwaldovic4572
    @cwaldacwaldovic4572 2 года назад +1

    I would say Tyranids. Mostly because a lot of creators makes nicer models than gw themselves. I just dislike the way GW makes nids with hands to actually hold their weapons. In my head canon those guns and blades should be part of their body.

    • @battlebrothersam
      @battlebrothersam  2 года назад +1

      I agree with the weapons part they are ever evolving biomass it only makes sense! Tyranids are an excellent choice I have a good few downloaded ready to be printed lol

  • @mekosmowski
    @mekosmowski 2 года назад

    My guess is Guard.

  • @stoicism388
    @stoicism388 2 года назад

    Daemons can be played in 40K, 30k, and Age of Sigmar

    • @battlebrothersam
      @battlebrothersam  2 года назад +1

      Wait... 30k also?? Why did I only think it was marines!

  • @Caladors
    @Caladors 2 года назад +1

    Demons? I bet its demons I am at 1:34

  • @boonespores4110
    @boonespores4110 Год назад

    Astra Militarum

  • @bengonzalez5215
    @bengonzalez5215 Год назад

    Guessing the best army to print is nurgle armies

  • @SpriteAndSmite
    @SpriteAndSmite 2 года назад +4

    The most expensive to buy army is the best to print IMO, so either sisters of battle or orks, but I'm going with Sisters on this one.
    Edit: Awww, wholesome bamboozle. That's my Sam lol.

    • @battlebrothersam
      @battlebrothersam  2 года назад +1

      Brother I think necrons might actually be up there with sisters for the most expensive if you chase the meta and get all the flayed ones etc

    • @SpriteAndSmite
      @SpriteAndSmite 2 года назад +1

      @@battlebrothersam Brother, I totally forgot about necrons, or my subconscious is protecting me from the terrors that are necron secondaries and auto-silent king.

    • @battlebrothersam
      @battlebrothersam  2 года назад

      Haha brother I just seen your edit! 😂 I think we all subconsciously forget about them... For the greater good

  • @TheArbiter1721
    @TheArbiter1721 2 года назад +1

    It’s gotta be krieg the models are just too damn expensive

    • @battlebrothersam
      @battlebrothersam  2 года назад

      I do like kreig *happy gasmask noise intensifes*

  • @KeithMel1
    @KeithMel1 2 года назад +1

    Space marines most common army

    • @battlebrothersam
      @battlebrothersam  2 года назад

      Most common with all the free files because of geedubs

  • @PsychonautSaiyan
    @PsychonautSaiyan Год назад

    DEATH KORPS OF KRIEG

  • @syedehteshamhaider
    @syedehteshamhaider 9 месяцев назад

    Orks

  • @grenadaball7655
    @grenadaball7655 8 месяцев назад

    Guessing kriegsmen

  • @joshuajones6295
    @joshuajones6295 2 года назад

    Guard

  • @brandonstapley9251
    @brandonstapley9251 6 месяцев назад

    Bruh where is the space wolves

  • @paulwalckiers7858
    @paulwalckiers7858 Год назад

    the worst army to 3D print is definitively stormcast. the armor is as codifyed as space marines but withouth cults for giving you the models

  • @alessandrobuccella1655
    @alessandrobuccella1655 2 года назад

    Bro, de price difference defenetly makes it worth it BUT if you think the quality and especially detail is even on the same planet as the ones of GW your f stupid. Honestly, HONESTLY they look like garbage in comparison. With a better 3D printer the story changes... but just saying.

    • @battlebrothersam
      @battlebrothersam  2 года назад

      Do you think games Workshop should make 3d printable files?