I just got a 2011 Durango and it got a srt engine in it can I change the pumpers the screen dash bored cluster and seats from a 2016-2020 srt Durango ?
you can go to harbor freight or a local hardware store and they will have metal rivets and a rivet gun you can use or you could also use plastic rivets or a small bolt if you wanted.
I just got a 2011 Durango and it got a srt engine in it can I change the pumpers the screen dash bored cluster and seats from a 2016-2020 srt Durango ?
I just got a 2011 Durango and it got a srt engine in it can I change the pumpers the screen dash bored cluster and seats from a 2016-2020 srt Durango ?
Very helpful, thank you.
glad we could help!
Nah that’s clean🔥🔥🔥🔥
Thank you for this
glad to help
can i put the new headlights and front bumper on a 2011 rt durango ?? will every still line up bro ??
yes
So before I do it, will the 2018 srt bumper fit on a 2015 limited v6?
yes they are the same generation so the bumper covers are swappable. you may need a few brackets or liners but the swap is possible.
You just have to change the bumper bracket and the front wheelhouse silencers(fender liners)
I have a 2015 durango and want to upgrade the front bumper to the 2021 bumper will it fit and what will i have to repalce to make it work
We have not specifically swapped that bumper but those are the same generation so it should be just the bumper and possibly brackets.
@@NightAndDayPerformance thanks
My push bar wants me to cut into my air baffle and I don’t know if I can avoid that or not
feel free to shoot us an email with the info/instructions and we can assist
nightanddayperformance@gmail.com
So after you drill rivets out how do you replace them or do you need to
push pins or with new rivets
How do you separate the air deflectors from the bumper?
if your talking about the plastic underneath you have to drill out the rivvets
So before i do it, will 2021 set bumper fit on a 2015 r/t v8?
yes. you may need to change the fender liners and brackets
@@NightAndDayPerformance thanks man ✅
@@NightAndDayPerformance brackets as in the core support ? Or just the fenders
@@AllGamersRD1have you done the swap ?
@pacopichon9443 most likely just fender brackets if anything. I haven't done this swap but they are listed as compatible as they are the same chassis
How do you get the front bumper trim off
the part that goes on the fenders also?
I have a 2014 durango rt. Can I swap the bumper form a 2020 onto mine and retain the 2014 headlights?
headlights must be swapped also I do believe
How do you replace the rivets you drilled out?
you can go to harbor freight or a local hardware store and they will have metal rivets and a rivet gun you can use or you could also use plastic rivets or a small bolt if you wanted.
How do you remove the top flaps? The very top of the grill that goes horizontal?
if yout talking about the flat surface above the grill it pops up.
Thanks so much! Would you say it takes less than 30 mins?
yes. to take it off can be done in 30min or less
Where you get the bumper from?
This one is factory with this vehicle. But there are many options OEM is best
Will that same kit fit a 2013 base?
The 2014+ is slightly different but it can be made to fit with the correct parts. Most likely Just brackets, bumper, possibly headlights.
Can that bumper fit on a 2016 model or a Durango with the previous GEN grills and bumper?
yes
@@NightAndDayPerformanceso I don’t have to upgrade my hood?
@@MrBBrooks10nope but the srt hood sure looks better 😅
Where can i buy some front bumpers to do the conversion
where are you located
Can the 2018 pumper fit the 2014????????????
yes
i have to do all this just to change my headlight assembly for my 2013 model
yes
Got some questions can someone reach out
shoot us a text. 713-344-2191
I just got a 2011 Durango and it got a srt engine in it can I change the pumpers the screen dash bored cluster and seats from a 2016-2020 srt Durango ?
you can but you may need the dash harness and bcm