Motorcycle Powered Car - DIY Alignment
HTML-код
- Опубликовано: 13 сен 2024
- The easiest and best way to set your front end alignment at home.
You can also check out the build series for this car here:
• Motorcycle Powered Fiat
Facebook: www.facebook.c...
Instagram: www.instagram....
Email: jnhclassics@gmail.com
Patreon: / jnhclassics
#jnhclassics, #diyalignment, #homerepair
Good for you! I did alignments for years and have used the "eyeball" method many times since I got out of the business. I'm also the proud owner of a 72 FIAT 124! Love the build!! Please keep the videos coming!
I miss watching your skilled craftsmanship. Thank you for all the great memories.✔️
Thanks for the eyeball wheel alignment tip, did my 911 3.2 the same way, drives much better.
Very interesting to learn that it’s so simple! Thanks.
Your good man. Wish I could do that. Your one hell of a backyard machanic.
Awesome DIY! Many thanks. FIAT on,Cheers;)
There's nothing like a Road Rally!!!
We did it numerous times in 2007 /08 with Mini Cooper S...red line in 3rd gear was my absolute Favorite!!
Great video...thanks
JNH SALVE CARRO 🚗
simple enough
Wow! I haven’t seen one of these in years! I used to see these when I was a kid waiting for the school bus & city bus. I thought they were neat little cars bc they’re so small.
Nice. Going to try that with my own 356 this week. Thanks! 👍😎
Good DIY!
That car is awesome and the open air makes even more appealing.
Nice! I would make it just slightly more complicated as follows:
Center the steering wheel.
Adjust the tie rods for zero toe-in, either by eyeball as you did, or by measuring between the same tread line on the front and rear of the front tires.
Check the wheelbase measurement on each side, rim edge to rim edge, to ensure that the rear axle line is parallel to the front, and adjust if necessary.
Mark and use the tie rod length adjustment sleeves to gauge and match the amount of toe-in added to each side by counting the turns from the zero toe-in setting.
Love this build !!!
Harber Fwy in Carson
Not all front and rear bases are the same. Then what? Just asking. Love your vids.
I did mine with a piece of string, some tape and a tape measure. my 1996 Buick Roadmaster sedan has a more narrow track width in the rear so I couldn't do it your way.
same question if car front tire and rear tire is different width? and what with correction for wheel and suspension work at drive?
You and superfastmatt should compare your cars (once his is running again)
We’re planning on it👍
Damn! I wasn’t the 356th person to “like” this!
All good but what about the camber?
I use an angle gauge for the camber👍
@@Jerod_Helt Thank you all good.
this proceedure is correct ONLY if the wheels and the tires are perfect and the front and rear track width is exactly the same., otherwise, it will not lead to an acceptable result.
Did you have to trim or roll the front corners of your front wheel wells to accomodate the front tirs?
Yes I trimmed the fenders a bit
Any update on the Land Cruiser? You were 80% done.
I’m working on it now, should have a new video out soon.
@@Jerod_Helt Looking forward to it. Might just be that motivation I need to get back into mine.