That red wire is a trigger wire to connect to your trigger at the front of the car. However, the other two wires are to connect to your rear reversing light, this will power the camera and you won't need the trigger.
@@tbogdane1610 I think it depends on the car and can bus. In my daughters Ford Focus the canbus tells the headunit it has shifted into reverse and so brings the screen up. This is with one of the aftermarket radio systems that is plug and play into the car's wiring looms etc.
I was trying to get through the rubber and I damaged the end of the cable. I decided to cut and run the wire because it was thinner, now I bought a new P2 power cable. Can I just cut it too and splice it to my old one? I saw that there are 3 wires.
I know this is old post, but im wondering how to fix a low voltage for the car. The back up camera works when its not running. But when you turn the engine ON, it will say NO SIGNAL. Simply the voltage drop. Need help please
Same problem here, with engine off it works, with engine on says no signal, BUT, if i remove the ground wite it will show some disruption in video but not working properly.. vw 2014
Words come out from our mouth, if you didn't know
Calm down tough guy. He may not know to explain it I english.
And what if he can’t speak ?
😂
😂😂😂
So what's wrong with subtitles in various languages?
this video takes sign language to another level !
No kidding
That red wire is a trigger wire to connect to your trigger at the front of the car. However, the other two wires are to connect to your rear reversing light, this will power the camera and you won't need the trigger.
Won't the headunit need the signal from the trigger so it knows to display the rear camera?
@@tbogdane1610 I think it depends on the car and can bus. In my daughters Ford Focus the canbus tells the headunit it has shifted into reverse and so brings the screen up. This is with one of the aftermarket radio systems that is plug and play into the car's wiring looms etc.
@tbogdane1610 Yes you need to connect it to the reverse + trigger as well
Yeah I'm like could you tell me where in the car are you at you didn't show that. It's pretty important if you want viewers
Well those flaps just need tape em up not connect @@kayboo5835
A man of few words
lol
Lol 😂. Steven Spielberg right there ladies and gentlemen
I have my red/black going to my battery. Plus & minus obviously. And the red up front I don’t use. My cam activated when I select reverse.
Thank you for explaining that extra red wire. I was so confused. Thank you!!
@@toddsmith8820 👍👍💯
It's BC U have a canbus, without U have to connect the trigger that extra red wire..
I was trying to get through the rubber and I damaged the end of the cable. I decided to cut and run the wire because it was thinner, now I bought a new P2 power cable. Can I just cut it too and splice it to my old one? I saw that there are 3 wires.
Thank you Chinese man 👍👍👍👍
toyota hybrid 2024 plis
So theres a blind man and a def man watching this clip together and the joke ends there
this video is the Joe Biden edition slow ,quiet and not smart enough to talk .
If you're going to make an advice video....Best to speak 😊😊😊
Lol… I love this!!😂😂
Mine just said “rear camera not detected “ anybody has this issue before? Was working fine
Anyone know where I wire the red and black to? I know rear light but it’s a multi colored loom..
Did you have to use the red black wire then
Ok ,red to red but where ?
Wow great video 😂😂😂
Someone jinxed him before the making of this video
Que pasa si los cables negativo se me tocaron en el adaptador .se puede quemar la pantalla .ya enchufada en el carro
What is he trying to say that those are connected with eachother 😅
how can i wire my factory one to a after market head unit
Next time less jibber jabber and just get straight to the point
Use your words.
Can you use it as a dash cam ?
?????????????
Very helpful
Ainda bem que ele tem dedos, porque senão se iríamos ver os fios.
Horrible explanation 😒
Helpful 🎉😊
Привет для чего этот открытый красный провод?
Eu não entendo pq a pessoa não fala
Thx
Boss how can I contact with mobile phone
Bro post instructions video, gives no instructions 😂
Where is 5hat red wire connect too?
Wtf
WTF
Don't connect red to red. This will just ensure there is no power going to your camera! Connect 1 of the reds to ignition live (preferably via a fuse)
What a joke
I know this is old post, but im wondering how to fix a low voltage for the car. The back up camera works when its not running. But when you turn the engine ON, it will say NO SIGNAL. Simply the voltage drop. Need help please
same need help to, I reckon its the wiring been trying to find a solution.
Did you use quick lock connectors? If you cut the original wires it senses the voltage drop.
Same problem here, with engine off it works, with engine on says no signal, BUT, if i remove the ground wite it will show some disruption in video but not working properly.. vw 2014
Get a phone stand it will do wonders for your recording and free up your hands
Wtf?
Nunca vi mudo fazer video😂
Didn't understand at all!
Cum putem prelungi cablul video?
😅😅😅😅😅😅
Lousy, shy, secretive video
Lol
Red to red then what? And where? OMG
Red to Red, then to the + reverse trigger on the tail light and of course black to a good ground source or -
Its not working
Useless
Where is the ground? Where are you put in the ground?
Talk Mf damn
Unfollow😂 x information
Wrong lol
What about the black
Ground
And what to tail light 12V?@@Albel7
@@MiroslavJahelkadid you figure it out?
Worthless video genius
What the hell is this telling me
Wtf
Lol