Every stereo receiver ive had has a PINK wire labeled REVERSE for backup camera. Ive never seen 1 with brown; so saying NO to the pink wire is an incorrect answer. Some are Brown and some are Pink! Learn something new every day!
What are Key1 and key2 wires for? A: They are for radio steering wheel controls if you do not have steering wheel controls built in do not connect them to anything. If you do have steering wheel radio controls you will have Key1, and Key 2 wires on your harness
Ciao, ho il canbus per la radio android, il filo rosso dell’alimentazione l’ho collegato al filo da 12 volt della radio e la telecamera parte, il cavo nero alla carrozzeria dell’auto per la messa a terra. Ho fatto correttamente?
I was trying to get through the rubber and I damaged the end of the cable. I decided to cut and run the wire because it was thinner, now I bought a new P2 power cable. Can I just cut it too and splice it to my old one? I saw that there are 3 wires.
I had brown cable and there was tag written “back” on it .
Thanks for the video. The comments helped me.
Thanks you so much my friend, I had more than 4 hours trying to find out and you save my day, thanks for the advice
Thank you so much
Pink wire worked for me 🙏🏽
Now I know tomorrow will be a positive day.. unlike today spent hours trying sort it.. thanks for the video 😊
Every stereo receiver ive had has a PINK wire labeled REVERSE for backup camera.
Ive never seen 1 with brown; so saying NO to the pink wire is an incorrect answer.
Some are Brown and some are Pink! Learn something new every day!
Pink wire worked for me, thanks. Also in my case the pink wire on the connector was blank on the same pin on the other side connector.
Done like u show. My fuses burned out 😂
Thank you so much, I cut the pink and and added it in, and it worked.
You can also do the two white wires that are there, gives power
No the wire doesn’t work
Does it really ?
@ yh
Do you have to soldier on or something because I have no idea how to do that?
اخي بس سوال؟
كيبلان ارزق ل بلوتوث و ل واي فاي
مع اي كيبل رئيسي لازم نربطها ؟
شكرآ مقدما
will be better to wire with reverse light bulb , some cheap android doesn’t have to much power to turn on camera ( will work some time )
I have those two blue wires coming out my rear camera input what are they for
It's for wifi antena
the pink wire in mine says "key 1" is it the correct one? or i have to cut the brown one and connect it with it?
i have the same pink wired and say key 1!
What are Key1 and key2 wires for?
A: They are for radio steering wheel controls if you do not have steering wheel controls built in do not connect them to anything. If you do have steering wheel radio controls you will have Key1, and Key 2 wires on your harness
It means that you don't need to wire it to a reverse light?
Thank you soooo soo much ❤️❤️❤️
Is this also for 2017 Honda Accord, Sir?
The red conect with the pink?
Red cable with pink cable??
And where goes the Pink one?
Thanks bro it worked
What are those two white wires for ? In the cameras plug?
That's exactly what I am trying to figure out. If you came up with a better solution please let me know. Thank you.
Whats about other side?
the third one left after the black one, for my case it cas brown
car radar oem location ?
what about the two small white wires?
The short white wires are antenna. One for Bluetooth receiving and transmission and the other is for WiFi.
If it has a decoder it was the brown wire that seem to activate the reverse screen for me
Is the brown cable !!! No pink 👎🏿
Dont listen to him , I did that and my radio burnt
Ciao, ho il canbus per la radio android, il filo rosso dell’alimentazione l’ho collegato al filo da 12 volt della radio e la telecamera parte, il cavo nero alla carrozzeria dell’auto per la messa a terra.
Ho fatto correttamente?
ill be trying it tomorrow and it cant be the brown cable because there isnt one
Are you sure it is the pink wire we have to join? There are so many colors of wire there. kindly advise. Tq
Everybody reverse wire not pink
Its an great day put a camera android
Salut
I was trying to get through the rubber and I damaged the end of the cable. I decided to cut and run the wire because it was thinner, now I bought a new P2 power cable. Can I just cut it too and splice it to my old one? I saw that there are 3 wires.
WTF
Is that wire going to provide power to the camera or
There is no pink wire on the back of the unit Is it the brown wire next to the red
@@DE1CRAFTSHello. Have you found a problem? Where this red wire need to go ?
@DE1CRAFTS thats a Dyam lie.
There is no pink wire is it the brown wire
me too