Awesome Explanation no words. Query. New install same plug ish. 2 trigger wires (blue) 1 too reverse got that.2 is that constant live feed. Or join them together T off to rear. Anytime can help a little. Be great.
i'm a bit confused on the step 5-6. so i wire the red wire from the yellow cord with the red wire on the camera. and in step 6 it says to run a cable to the positive on the reverse light. so will i need to get a brand new wire to do that? since the two red is already splice together.
That's what I'm hung up on. Pretty sure I'll be splicing both red wires together at the green wire. One red powers the camera, the other triggers the radio to flip over to the backup screen, if I'm understanding correctly.
Thank you, I think this will help me. The instructions that came my unit were so confusing. I will use the third wire next to red wire. My in brown also, but the instructions said connect to pink wire?!
Yeah, it's not based on movement, although that must exist in some setups, it's linked to the backup light because that's linked to the reverse on the trans. So it's not about the light, it's about the camera coming on when the car is is about to move backwards.
Hi mate, great video. I followed same instructions, it does triggers the camera when putting in reverse but there's lot of interference. I can't see at all. Can you please help?
My camera doesn’t automatically switch if I put it the car into reverse. I have to manually hit the camera button on my unit for it to show up. Did I wire this wrong?
Hello. I just installed the head unit and it is very nice. Can you disable the backup camera on the head unit? I don't want to install the camera at this time. Thanks.
Best instructions and easiest to understand🤠👍👌🙏 I am planning to use wireless Transmitter and Receiver instead of the long wire. I am not sure that it will work. Worse case, I will use the hard wire (long wire) to the head unit. In any case, your instructions are the best I have seen. No unnecessary waffle🤐✌. Thank you.
step 6 ? when splicing red video cable to red power cable how do you run it to a reverse light? you have to splice into that reverse light? what if your unit already engages video when in reverse but has no video feed like my unit does? does that make sense seems on my unit the camera only needs power/video for the cam? thanks for the video and sharing.
Put a multimedia reverse camera with touch screen in and when I put it in reverse it shows perfectly but once I let go of break it turns black. Then I hit breaks again and I can see everything behind me. Not sure why
Hey there! This is a great video, but I am stuck on step 6, where it says to run a cable to the + on my reverse tail light. How exactly can I do that? The car in question is a Suzuki Swift from 2010. Should I pull out the cable from the tail light and splice it as an extension to the red vires which are spliced?
Excuse me, it is an Exford AVX-6450GPS recorder, the reverse camera was connecting and disconnecting, it said Camera No Video Signal, what should I do because of the SIM
@@Devo1987 not yet. but from what i've heard you need some cable with a switch. connected to the convnient wire that comes from the head unit, and from there, attach it to the accessories wire for power when needed. here... he explains it well ruclips.net/video/olhrPau4AIA/видео.html
This is Dustin in knoxville, tn with the single din 10". This is awesome to watch you guys start to grow more and more like this. "Splicing the wires" had me laughing. Im just waiting for the dumb person to hook it up like that and complain that it doesnt work 🤣🤣. Anyways, i have a manual transmission and the reverse lights never worked as the previous owner ruined most connections on the harnesses. That being said, i wired up 2 led flood lights to a toggle switch fed power from a 12v source with a 15amp fuse in line. Can i just wire the 2 small red wires that are supposed to go to the reverse light into the power on the flood lights? Seems like all the red wire needs is a power source for the camera?
@@bike_partsireland7707 i thought it was the actual camera but tested it with another system and it works. Maybe the problem is wire somewhere not making good contact? Please if you find answer share with me.
Hi, I have an android stereo panel with auto android and carplay. The adjustments and options for the reverse camera are awful. Is it possible to use another app with my existing camera or are they limited to options in their chips ? Some videos I've seen show cameras with dynamic guidelines that help steer into a parking bay for example and show correct axle widths and danger zones. Thanks!
If I'm correct, the wire going to the reverse bulb triggers the reverse camera to activate and show on the screen. Hence the need to wire it into the reverse light bulb wires.
I have done this and got image on the unit. The leds on the camera wont turn on. I guess they are broken or do they turn on at night only? If i get image I should have connected everything the right way right? Many questions but I could have missed something about the leds.
What about plug n play situations. 2017 Lancer ES, my car has oem reverse cams and the new Android Unit has all wire adapters to make it Plug N Play. The pink wire which says BACK is not connected to the pin connector which is where the power and other wires are connected, should I just splice that and connect it to the pin connector to make it work aka give it power input?
Hello friend I have BMW f20 2012 Manual transmission would this be canbus and how would I install the reverse camera would I need to connect to the back brown wire on the head unit with the red and then red wire to the power. Or would I need to connect red wire to the power wire and then cable to reverse lights for it to work ?
Hey. I dont have place for single video input in radio but I see there is one video input coming out with all this cables and this have a small plastic I think I need remove and hope this is it.
Mine came with 2 blue wires hanging off the plug that connects to the radio. What do those wires splice in too? Or make a video on how to install the backup camera that comes with the 10 inch android radio got the Jeep Wrangler
how about 4th orange it reads label as "key 1" only wire is free. black/red/brown/ than "orange'/ ...Orange not connect free wire is that the one? Black red and brown are use the only free wire orange. help with this thanks
Hi today I visited an auto electrictrician to install the reversing camera but for some reason the unit is not responding he checked everything but it’s not responding and it’s not going to reverse screen. Do you have anything to suggest??
@@audiovisionusa hi thanks for the reply,no I’m not I just came across ur videos and I thought I could ask for help 😂 btw great videos I just realised that I did two mistakes when I was wiring the camera 1st I connected to tail light (can bus model) 2nd when I cut the 3rd wire for the reverse trigger I just connected it with the camera and not with the can bus as well . Do you think that that’s why it’s not triggering? Thanks 😊
Ciao amico io ho una clio 4 anno 2015 ho montato un ts10 con canbus simplesoft ma non riesco a far funzionare il bottone dell’assistente vocale quando lo schiaccio invece di attivarsi l’assistente vocale mi apre sempre e solo i Bluetooth sai come posso risolvere ?
Hello, very good video, I have a Renault Clio V 2016 but although everything is apparently correct, when reversing the color sensors work but the proximity indicator sound does not. Do you have any idea what it could be? Thank you so much. If I can solve it, I'll send you a donation.
Does anyone know where to buy all those wires? I bought a car with this stereo and I’m trying to set it up with an amp, subs and rear view camera but I can’t find the wires anywhere. Thanks.
Hi there I have orginal camera installed on car and i bought an after market android how I can connect original camera to android? Can you please help me ? I have rgb to av canbus adapter but don't know how to or where to connect wires.
Mate, you are a legend. I bought a similar unit from Aliexpress and the instructions just didn't exist. Thank you, thank you, thank you!
There are tons of video on internet, but this is the best, simple, no trash talk video I ever seen. Thanks so much!!!!!!!
Much appreciated you saved me. There were not enough clarity in my instructions but with yours took every bit of 5 minutes.
This is most helpful reverse camera installation video I have found so far. Easy to follow, very clear video and instructions. Thank you for sharing.
Good job on explaining Step 1, connecting the reverse wire. I could not find a good demo of that anywhere.
About time I find a video straight and to the point. You get 5 stars.
You are the best. Your instruction is quick and it's so easy to understand. Simple and I don't get lost.
This was super helpful. Finally I made it with this vid🎉
Hello sir that was a fantastic video and a great help , appreciate you posting this 🇬🇧❤️🙏🏾
Excellent video. Thank you.
Lifesaver. Wiring the ground to the rear light ground was a great tip.
Genius dude, nice, easy and to the point. Thank you!
This saved my bacon. Thanks for the helpful video.
Excellent. Clear and concise. Thank you very much.
Thank you so much for the information, my instructions manual had none of this information.
Glad we can help 🙂
Appreciate the video family, I knocked it out.
Great video! Got everything I needed!
At 2:10 you add the red wire with the video cable to the red and red and black wire?
That was a really treasure video, thanks you!!!.
You're welcome! Glad it was helpful. 🙂
Awesome Explanation no words. Query. New install same plug ish. 2 trigger wires (blue) 1 too reverse got that.2 is that constant live feed. Or join them together T off to rear. Anytime can help a little. Be great.
i'm a bit confused on the step 5-6. so i wire the red wire from the yellow cord with the red wire on the camera. and in step 6 it says to run a cable to the positive on the reverse light. so will i need to get a brand new wire to do that? since the two red is already splice together.
That's what I'm hung up on. Pretty sure I'll be splicing both red wires together at the green wire. One red powers the camera, the other triggers the radio to flip over to the backup screen, if I'm understanding correctly.
@@AeroSS87 what did you end up doing to get this to work?
@@mikey13b Exactly what I assumed. Both positive wires go to the green reverse bulb pigtail wire, black is just a new ground tap somewhere.
Appreciate the work man it helps alot
Thank you, I think this will help me. The instructions that came my unit were so confusing. I will use the third wire next to red wire. My in brown also, but the instructions said connect to pink wire?!
Hi man tanks a lot its working for me tanks to show us your expérience 💯
Wait, so that means the reversing light is the trigger for head unit to switch & display camera image?
Yeah, it's not based on movement, although that must exist in some setups, it's linked to the backup light because that's linked to the reverse on the trans. So it's not about the light, it's about the camera coming on when the car is is about to move backwards.
Hi mate, great video. I followed same instructions, it does triggers the camera when putting in reverse but there's lot of interference. I can't see at all. Can you please help?
So I had same problem. I went into settings and changed a couple of the reverse settings and it stayed working after I found the right setting
Have to run a relay. Look up relay for reverse camera
@@JerseyG_856does the camera on without in reverse gear??
Can I use my ome backup camera that came with my car or does it only work with cam that come with stereo ?
You can use a 12v filter /rectifier if it's a German car.
Thanks, it worked for me.
My camera doesn’t automatically switch if I put it the car into reverse. I have to manually hit the camera button on my unit for it to show up. Did I wire this wrong?
the camera takes two different + from android radio reverse wire and from reverse tail light?
Yeah, I'm confused too, but it works.
Thank you very much. I learned it.
Hello. I just installed the head unit and it is very nice. Can you disable the backup camera on the head unit? I don't want to install the camera at this time. Thanks.
On step 6 - do you have to get another red wire and run it straight from the slice to the reverse light?
exactly what i wanna know because it literally has no way to reach. Mine just wont work anyways... no video/power/nothing
@@hakimdurand8427did any of you guys find out how to do this? Cheers
thank you! helped a lot
Best instructions and easiest to understand🤠👍👌🙏
I am planning to use wireless Transmitter and Receiver instead of the long wire.
I am not sure that it will work.
Worse case, I will use the hard wire (long wire) to the head unit.
In any case, your instructions are the best I have seen.
No unnecessary waffle🤐✌.
Thank you.
bro how u finish
2:15 what you mean? So you connect both red wires plus the tail light cable, so it's 3 cables together?
Good question
@@FRANKLYNACRUZI did this last year, indeed you have to connect the 3 wires together.
step 6 ? when splicing red video cable to red power cable how do you run it to a reverse light? you have to splice into that reverse light? what if your unit already engages video when in reverse but has no video feed like my unit does? does that make sense seems on my unit the camera only needs power/video for the cam? thanks for the video and sharing.
You are a master! Thank you
Put a multimedia reverse camera with touch screen in and when I put it in reverse it shows perfectly but once I let go of break it turns black. Then I hit breaks again and I can see everything behind me. Not sure why
Great and what if i cant find the back or reverse cabel on my radio ? Its not markt
My audiovision 10 inch unit shows the likes but blacked out screen. Intermittently works.
Any idea how to fix it?
I just ordered from you guys does the tablet stereo compatible with factory back up cámara?
Why is it that when you change a setting and go to the home page the settings go back to default?
So it looks like the number 3 pin is wired into the can bus am I supposed to splice into it?
Hi , nice video, i want to retain my factory camera, how can i connect the cables?
Hey there! This is a great video, but I am stuck on step 6, where it says to run a cable to the + on my reverse tail light. How exactly can I do that? The car in question is a Suzuki Swift from 2010. Should I pull out the cable from the tail light and splice it as an extension to the red vires which are spliced?
Excuse me, it is an Exford AVX-6450GPS recorder, the reverse camera was connecting and disconnecting, it said Camera No Video Signal, what should I do because of the SIM
Does it have to be to the right light I did mine to the left ??
very helpful video👍🏽
How do I get it to connect to my steering wheel and also do I need to change camera to have back camera work
How do u connect both a front and rear camera?
what to do with the pink/reverse cable? i see you only link the red cable to the brown/back cable.
Will the stock camera work with the system
thanks for the video, what if i want to turn on and off the camera while not in reverse. where can i draw the power from.?
Did you figure it out ?
@@Devo1987 not yet. but from what i've heard you need some cable with a switch. connected to the convnient wire that comes from the head unit, and from there, attach it to the accessories wire for power when needed. here... he explains it well ruclips.net/video/olhrPau4AIA/видео.html
@@ynonser5804 thank you very much :-)
Where do you connect the pink wire to?
the pink wire connects to this wire 1:09...the red one
what if your camera module has an Ir, rx, and tx wires in addition to the reverse wire?
Thank God for this video
This is Dustin in knoxville, tn with the single din 10". This is awesome to watch you guys start to grow more and more like this. "Splicing the wires" had me laughing. Im just waiting for the dumb person to hook it up like that and complain that it doesnt work 🤣🤣. Anyways, i have a manual transmission and the reverse lights never worked as the previous owner ruined most connections on the harnesses. That being said, i wired up 2 led flood lights to a toggle switch fed power from a 12v source with a 15amp fuse in line. Can i just wire the 2 small red wires that are supposed to go to the reverse light into the power on the flood lights? Seems like all the red wire needs is a power source for the camera?
My cable with the yellow plugs (video cable) has nothing to splice onto - no floating cables. But have the pink back up cable
very helpful thank you!
I did everything just as explained and my screen is just blank when put in reverse. Any thoughts?
Same
@@bike_partsireland7707 i thought it was the actual camera but tested it with another system and it works. Maybe the problem is wire somewhere not making good contact? Please if you find answer share with me.
Hi, I have an android stereo panel with auto android and carplay. The adjustments and options for the reverse camera are awful. Is it possible to use another app with my existing camera or are they limited to options in their chips ? Some videos I've seen show cameras with dynamic guidelines that help steer into a parking bay for example and show correct axle widths and danger zones. Thanks!
How should I wire it if I have got CANBUS?
You ever figure this out???
NEED AN EXPERT'S ADVICE..
What if want to add parking sensors in it.? Please help me.
Thank you awesome information
I have a 2015 Scion Xb, will I be able to just plug and play with my factory reverse camera? or will I need to purchase another wire kit?
did you find out how to do this?
when reverse in the shift, does it automatically show on screen?
is there no more wire connection in reverse shifter?
If I'm correct, the wire going to the reverse bulb triggers the reverse camera to activate and show on the screen. Hence the need to wire it into the reverse light bulb wires.
the white piece that goes into the radio has two lil blue wires to. Wat r those for?
How do i tun a cable to the positive ?
I have done this and got image on the unit. The leds on the camera wont turn on. I guess they are broken or do they turn on at night only? If i get image I should have connected everything the right way right? Many questions but I could have missed something about the leds.
What about plug n play situations.
2017 Lancer ES, my car has oem reverse cams and the new Android Unit has all wire adapters to make it Plug N Play.
The pink wire which says BACK is not connected to the pin connector which is where the power and other wires are connected, should I just splice that and connect it to the pin connector to make it work aka give it power input?
Did that work?
Hello friend I have BMW f20 2012 Manual transmission would this be canbus and how would I install the reverse camera would I need to connect to the back brown wire on the head unit with the red and then red wire to the power. Or would I need to connect red wire to the power wire and then cable to reverse lights for it to work ?
The pink cable is already plug into the can bus decoder..
@@TrueCreepaster We have this video for canbus models: ruclips.net/video/x4dVUgz9lPg/видео.htmlfeature=shared
@@audiovisionusa thanks but where do i put the black ground cable please ?
do you know how o connect to rear view factory cam
Hey. I dont have place for single video input in radio but I see there is one video input coming out with all this cables and this have a small plastic I think I need remove and hope this is it.
Mine came with 2 blue wires hanging off the plug that connects to the radio. What do those wires splice in too? Or make a video on how to install the backup camera that comes with the 10 inch android radio got the Jeep Wrangler
Follow this video for that model
ruclips.net/video/o2ZP0S2G5aw/видео.html
Why not use the factory back up camera that is already in the car and save hours of running wires and installing new cameras 😢
How to connect the original camera with a new android radio
Tried mine today. Unit Works but reverse camera turns fuzzy when engine is running
How do the Rado sound
how about 4th orange it reads label as "key 1" only wire is free. black/red/brown/ than "orange'/ ...Orange not connect free wire is that the one? Black red and brown are use the only free wire orange. help with this thanks
Thank you 🙏
Thank you. Excellent explanation.
Hi today I visited an auto electrictrician to install the reversing camera but for some reason the unit is not responding he checked everything but it’s not responding and it’s not going to reverse screen. Do you have anything to suggest??
Are you one of our customers?
@@audiovisionusa hi thanks for the reply,no I’m not I just came across ur videos and I thought I could ask for help 😂
btw great videos
I just realised that I did two mistakes when I was wiring the camera 1st I connected to tail light (can bus model) 2nd when I cut the 3rd wire for the reverse trigger I just connected it with the camera and not with the can bus as well . Do you think that that’s why it’s not triggering? Thanks 😊
Ciao amico io ho una clio 4 anno 2015 ho montato un ts10 con canbus simplesoft ma non riesco a far funzionare il bottone dell’assistente vocale quando lo schiaccio invece di attivarsi l’assistente vocale mi apre sempre e solo i Bluetooth sai come posso risolvere ?
Mine came with a mini fan. Where does the fan go?
Hello, very good video, I have a Renault Clio V 2016 but although everything is apparently correct, when reversing the color sensors work but the proximity indicator sound does not. Do you have any idea what it could be? Thank you so much. If I can solve it, I'll send you a donation.
I think I’ve messed with the settings too much; please help. I no longer have any pop up upon reverse
Does anyone know where to buy all those wires? I bought a car with this stereo and I’m trying to set it up with an amp, subs and rear view camera but I can’t find the wires anywhere. Thanks.
Thank you great video!
Hi there I have orginal camera installed on car and i bought an after market android how I can connect original camera to android? Can you please help me ? I have rgb to av canbus adapter but don't know how to or where to connect wires.
Same problem with me can you help?
You may need a kit to retain factory camera depending on your vehicle
I have rgb canbus but there is 3 wire which is b+ gnd and acc where or which wires i ll connect together on head unit?
My camera works fine when ignition on, but no signal when engine is running
Wow! thank you very much
Having trouble getting our back up camera to work. Radio, blue tooth, and GPS is working
And it didn’t work when I did mine from the left or just not popping up
where is radar original car sensor location wiring ?
Will this method allow you to choose the camera on the radio when not in reverse?
No
@@audiovisionusa do you know how to wire so I can view the rear camera while not in reverse?
Instead of switch power from the tail light, you need constant power to the red wire in the trunk.
I connected everything but my camera video is distorted, it shows grey and black lines and can’t see much. What could be my issue?
Hi did you purchase a radio from us?
Change the input
I dont see any wires that say backup or camera on them
I'm missing the plug of all the splice wires smhh
How to connect this to 360 camera?