You….. you are the real Fkn hero today!! Purchased an android 13 touch screen for my Ram…. Hooked up the power to rail lights as I’ve done with all my cars….For months no one could tell me why it wasn’t working… then I found this video .. perfection
I have a 2013 Tahoe with can bus. im trying to install the backup camera and have followed this and still get no picture when put in reverse. Is there something im missing.
Thank you thank you thank you!!!!! Why don’t they include this info with these radios?? It’s so simple but you have to know to splice the pink wire and not wire to taillight power like so many non canbus Android systems. 👊🏼🙌🏼
Great! Without previous experience, I've installed the rear camera thanks to your video (the unit I bought, on Aliexpress, came with a wire already "ready" to be jointed to the red wire, marked "back", no need to cut and split the "pink" wire)> A big THANK YOU! 😁
This worked great. Very puzzled when I finished the wiring but I still had this weird split/B&W image on screen. Checked my Eonon (android) settings and you can toggle the camera from PAL to something else to NTSC (which is what we need here in the US).
Thanks so much, I have been fighting with this unit for a week, watched your video, did what it said, and it worked, thank you again for that. Now I have to figure out how to get the lines to come on, and the sound. any suggestions?
Rca spliced to oem harness, I just installed the Atoto S8 Premium. I get rear cam output on screen. Hence, I don't get signal from rear cam when in reverse. As could it be because I didn't wire up brake wire or ground it? Please help out if you can here...
I did mine with a canbus and I connected it to the reverse light worked only when car wasn’t on only ignition position 1 but when I turned engine on and put in reverse didn’t work so that’s were I made my mistake thanks for the video I’ll re do it again tomorrow
Thank you for this awesome video. Probably the most informative & slowing how to properly splice. One question...at the end of the video you said not to forget to connect the ground. Might be a silly question but where do I connect the negative ground to? Thanks!
The video is very helpful, but I have a wireless transmitter and receiver, I can connect the receiver like this, but I have to connect the transmitter to the taillight or I would have to pull a cable through the whole car, which makes no sense.
Oh my god, I've spent 7 hours today trying to get this working and I finally found your video and it worked! Thanks you very much! Why can't the Chinese just give this information in the instructions instead of random words and useless images!!
This is about the 20th video I've watched trying to figure out fitting an Eonon canbus/head unit/reverse camera to my Golf, and it's the first one that has made absolute sense. A couple of small differences in how the wires are laid out on my system but now that I understand what's actually going on I can figure it out. Thank you :)
Thank you!! Very useful video, i have strugled a lot before finding this video. I was connecting the + and - to the backlight like many others said but the camera wasn't working. Thank you again!!
Does the pink (3rd wire) receive the 12v when the vehicle is switched into reverse via the canbus. I'm using original camera and not connecting the additional camera and not spicing pink. The unit should receive power and switch screen even if the camera is blank. What controls power to this pink wire - Is it programming in Canbus or the Android device configuration?
If not power to the red wire (the one who connect to the Third like on the video) when reverse then take the positive from the back up light.this is that works for me
Which is better, crimping or soldering? Also its shocking the amount of videos ive seen where people are connecting to a reverse light or a washer motor wiring to power the camera instead of using the power from the head unit which has canbus.
Have wired a good few reversing cameras in past, mainly on excavators and trucks and this one I bought for my VW caddy threw me off. Spent ages neatly wiring it into tailight loom and was puzzled when it didn’t work. Would have been handy if stero manufacturer labelled cables. I was sure the little blue wires were the signal ones. Will have to go back out to workshop now and get it sorted, cheers for the good video, don’t know what I would have done without it
Can someone please tell me about 7:58 what happens if we connect the red wire to reverse tail light like we would in a non canbus model car ( i assume the power gets taken from both reverse light and stereo) Is that going to damage something?? Or is it just there to save extra effort to not connect them to reverse light power positive??? Thanks
Hi 👋 the power comes from the canbus. If you connect it to the reverse light as well it will send a unnecessary signal when in reverse and it could damage the canbus after a while, which will then cause the radio to not function properly.
@@audiovisionusa @AudioVisionUSA okay thanks so if we so have canbus, its best to wire like in the video first, and then if still not working like this then only connect the red rear to power positive from reverse light. Got it thanks. Will avoid wiring like normal. I was just unsure because I'm buying canbus for an older car like 2005 opel corsa c, so unsure whether that canbus would be sending reverse signal or not (its mainly for steering wheel control i think). Can i just another question if we need to plug rear red to power positive, can we still do that (if wiring like in video isn't working) and then not connect the red power from yellow RCA to front of radio? Thanks again your very helpful
@@divyanshugogna6152 if it automatically switches to reverse without the camera being connected then the canbus triggers the reverse camera. If it doesn’t then you have to wire it like the other video we have. If you have manual transmission you will most likely have to wire it directly to the reverse light
@@audiovisionusa its automatic transmission, and it show what gear is vehicle in on car's dashboard, so i guess canbus should automatically switch it. I will wait for stereo to come and report back thanks again.
I was so happy that I found this video, my car has canbus, tried today this method (not attaching to the “+” of the backing lamp) but still doesn’t work :( What else could be the problem?
I did not understand the last wire on the camera. Where should the black wire be connected? Connect to ground? Can someone explain where this cable will connect to?
I have a 2011 silverado with a factory camera, how would i go about hooking it up, i believe my stereo is similar to the one in this video! Thanks in advance 😊
This didn’t work for me. The 3rd wire on my Android 13 is brown, when I put it in reverse there is no voltage going to the trigger wire from my canbus. Any ideas?
hello, i installed a new multimedia on my ford fiesta, but i have a problem, the parking sensors don’t display when i go in reverse, they do when something is in front of me, but never if it’s behind me, while if something is in front and the display triggers, i can see both front and back perfectly… any advices?
Hey man, thanks for the info. I was stuck on which wire to use for the reverse trigger. And I used the brown wire as there was no pink one in my loom. This was a small project I was doing with my son, and we had fun... a lot actually, especially with your hand gestures...😀 So thanks again. All the best.
It needs to be grounded to the vehicle. Find a metal spot somewhere close the camera to attach it, preferably underneath out-of-sight. You may have to drill a hole and use a screw if you can't find anywhere.
Are you running an automatic car? I followed everything but cant get the head unit to pickup the reverse trigger from canbus. I tried installing on a Manual (stickshift) Honda.
This fixed my issue of the camera not coming on in my Corolla with an android screen. It was a brown wire not labeled so yeah I would have never figured this out. Great video!
Thank you for sharing 🙌🏽 Very helpful! In your vid you stated the trigger wire is always the 3rd wire next to the red wire and colors may vary. Will this stay true, even if the wiring harness or head-unit is not the same as the model here? My audio vision unit’s 3rd wire is brown and runs from it into the maroon canbus module. Just wanted to confirm 👍🏽 Thank you in advance!
He probably can't say yes for sure, now that so many models are out now. You could try a test light on the plug to see what it powered when the car is shifted into reverse?
Thanks to you @AudioVisionUSA I just got it installed tonight on my VW MK6 after watching tons of YT videos, yours nailed it simplified! Saved me $AU 150 in labor fee bigtime!
F-250 install....Thank you so much. Just like you said, regardless of wire color (mine was Brown even though the manual diagram showed Pink) the Third from the Ground splice between the CAN box is the Ticket!!!! I have been back and forth with the customer service rep and technician sending generic videos and fuzzy pictures from the slow boat from china Alibaba company (Reako Sounds plug and play K2001N Android 12) that I bought mine from. So for $50 bucks, I really can't complain!
I hope this works. I already had a camera hooked to My Jeep u connect radio and I just hooked the rca to the new radio and of course just static. When car goes in reverse it switches to camera screen but static signal. And it worked fine with uconnect. I got to take it back out and try this wire thing. 🙏
Hi, My car is 2012 Honda Accord and recently installed android Radio then installed backup camera. When I turn on Reverse mode, the camera turns on (led light turns on) but the no video it ahows only black screen. 1-I have connected one end cable to radio Cam-in rca yellow jack and spliced red cable to other cable labelled as back. 2- connected other yellow rca jack to camera yellow jack, red wire spliced to power card red wire then both spliced to reverse light blue cable and connected power cord to camera black rca jack. 3- power cord black wire spliced to reverse light black cable. Not sure what I did missed over here, but not seeing camera video on screen. Can someone suggest what I am missed here?
I did all that but my camera is not working, I have T’eyes c3, in instruction says to wire the red wire to pin 3 which is Accessory and yellow wire to pin 5 which is trigger wire. With all that no image. At the back connected like you did on yours. Do you have any suggestions?
It's a non sense. Accessory wire send 12v constantly when ignition is on. The camera will be always powered when u drive. And the cable camera going to the head unit has only the video connector and a little red wire. This red wire should be connected to the trigger and plug the yellow connector with the yellow "camera in" connector of the head unit.
Se collego il cavo rosso dell'rca video al filo retro marcia il filo rosso dietro l'autoradio al cavo marrone cambus e il filo dello spinotto rosso e nero +- il filo rosso ad una fonte a 12 volt allora tutto funziona bene però così la telecamera rimane sempre alimentata fino a quando si spegne l'auto
Great video, Is there any chance that you can make something simmilar for those android head units with canbus installation for audi b8 (a4, a5, q5) (2008-2015)? Thank you in advance.
Fitted a camera to a mitsubishi asx , cannot get a image from it .. changes to a black screen when I put the car into reverse..but just a black screen ??
Thank you for the tutorial. The manual the installation of camera says if have a canbus, its not necessary to ground the black cable. So I would like to know if ground or not, can you help me, thnakyou
Ciao complimenti per il video veramente spiegato bene io ho fatto la stessa cosa ho una Fiat fre emont ho montato una radio multimediale però prendendo il cavo nel mio caso dal cambus marrone però quando collego il cavo rosso dello spinotto e il cavo rosso dell'rca giallo video la telecamera non si vede non arriva il video non capisco e non trovo soluzione
I just installed this radio in my Jeep jk 2007 model with factory amp. But I bought a reverse camera that mounts to the rear tire Carrie. I followed these instructions but the rear camera doesn’t have same connection. It has a black one with 4 pins that goes to camera and the front before camera connected to pins has the black and red wires that comes off the main wire. Would I just connect the 4 pins connector and open the end to camera to find red wire and splice into it and ground the black wire.
Hi, I followed the procedure step by step to connect the rear camera to the car radio. When I put the car in reverse the LEDs light up but nothing comes out on the screen. can you help me?
I managed to make the connections only that the signal seems to be disturbed and the image is visible like old TVs when the signal is poor. Can someone help me?
Heya. Im having trouble with the camera. It works fine to be fair, but at night it takes atleast 8 seconds for the brightness to adjust. Is there a possible way to have the camera stay on (not visible on screen) as soon as the rear lights turn on? Thanks for the great video btw
Your unit is probably slow or faulty. With Canbus, as soon as you go into reverse it will signal your camera, if it’s not adjusting then no wire changes will fix that. Even if you link it to your taillight I’m pretty sure it would still do that, not sure just my thought
@@raquellewis7294 I dont think my unit is slow nor faulty. The iso and all that is controlled by the cam so it probably takes a minute to start up and adjust it all. My thought was that i might be able to circumvent this by having it powered all the time.
This video right here! This is the one that I have been looking for. Followed the steps on my BMW 335i and it worked perfectly with my Eonon head unit and backup camera. Thanks for the info. The trigger wire from the canbus is the key.
Best video I’ve seen by far, thank you
You….. you are the real Fkn hero today!! Purchased an android 13 touch screen for my Ram…. Hooked up the power to rail lights as I’ve done with all my cars….For months no one could tell me why it wasn’t working… then I found this video .. perfection
Legend, you’re a legend 👌🏽
Finally !!!! Thank you so much 👍🏼👍🏼👍🏼👍🏼
Great explanation! Thank you so much ! 👍
Hi, thanks for the video, is it possible to connect a wireless reversing camera in the same way?
I have a 2013 Tahoe with can bus. im trying to install the backup camera and have followed this and still get no picture when put in reverse. Is there something im missing.
ever get yours to work?
Just to understand better. at step 6, the pink cable you cut and reconnect (pink one, "radio's trigger wire") is coming from the canbus adapter?
Did it work after cutting wire from canbus?
Thank you sir
I very much appreciate your help
Do I attach those two red wires to reverse light on a 2003 gmc Sierra 2500 diesel ??
Thank you 🙏🙏🙏🙏🙏the best video
Mine had a brown wire, but I have a question how do you wire in a second camera for the front? I don’t have front camera RCA it says cvbs1
And the groud (-) cable from the camera where do you connect it?
Is there a way to flip the image? I am unable to physically mount the camera in a different place, can you flip the view in the settings?
I have canbus
Thank you thank you thank you!!!!! Why don’t they include this info with these radios?? It’s so simple but you have to know to splice the pink wire and not wire to taillight power like so many non canbus Android systems. 👊🏼🙌🏼
Big facts 💯
Thank you very much you are the best
Great! Without previous experience, I've installed the rear camera thanks to your video (the unit I bought, on Aliexpress, came with a wire already "ready" to be jointed to the red wire, marked "back", no need to cut and split the "pink" wire)>
A big THANK YOU! 😁
How can i connect the black wire to the ground? Some help? Thank you
This worked great. Very puzzled when I finished the wiring but I still had this weird split/B&W image on screen. Checked my Eonon (android) settings and you can toggle the camera from PAL to something else to NTSC (which is what we need here in the US).
Holy shit… after searching for months I found this. I don’t know how I didn’t before but this is an absolute godsend
Thanks so much, I have been fighting with this unit for a week, watched your video, did what it said, and it worked, thank you again for that. Now I have to figure out how to get the lines to come on, and the sound. any suggestions?
Rca spliced to oem harness, I just installed the Atoto S8 Premium. I get rear cam output on screen. Hence, I don't get signal from rear cam when in reverse. As could it be because I didn't wire up brake wire or ground it? Please help out if you can here...
I did mine with a canbus and I connected it to the reverse light worked only when car wasn’t on only ignition position 1 but when I turned engine on and put in reverse didn’t work so that’s were I made my mistake thanks for the video I’ll re do it again tomorrow
Thank you for this awesome video. Probably the most informative & slowing how to properly splice. One question...at the end of the video you said not to forget to connect the ground. Might be a silly question but where do I connect the negative ground to? Thanks!
Thanks, buddy, great help finally. i was able to install the camera. Simple and easy.
The video is very helpful, but I have a wireless transmitter and receiver, I can connect the receiver like this, but I have to connect the transmitter to the taillight or I would have to pull a cable through the whole car, which makes no sense.
Oh my god, I've spent 7 hours today trying to get this working and I finally found your video and it worked! Thanks you very much! Why can't the Chinese just give this information in the instructions instead of random words and useless images!!
Man really nice video! But I do a question; how do the camera gets power if you don’t take the power from the reverse light?
That’s what I’m thinking on also, but I guess from the head unit
This is about the 20th video I've watched trying to figure out fitting an Eonon canbus/head unit/reverse camera to my Golf, and it's the first one that has made absolute sense. A couple of small differences in how the wires are laid out on my system but now that I understand what's actually going on I can figure it out. Thank you :)
Also had a golf mk6 and was in tail light and did not work at all. Had i did like this it would work. Its get power from stereo so no need tail light.
Thank you!! Very useful video, i have strugled a lot before finding this video. I was connecting the + and - to the backlight like many others said but the camera wasn't working. Thank you again!!
Just figured mine out on my own,instead of stripping the pink one I connected to one of the two little blue ones at the side of the video cable.
Which unit do you have?
Does the pink (3rd wire) receive the 12v when the vehicle is switched into reverse via the canbus. I'm using original camera and not connecting the additional camera and not spicing pink. The unit should receive power and switch screen even if the camera is blank. What controls power to this pink wire - Is it programming in Canbus or the Android device configuration?
If not power to the red wire (the one who connect to the Third like on the video) when reverse then take the positive from the back up light.this is that works for me
Which is better, crimping or soldering?
Also its shocking the amount of videos ive seen where people are connecting to a reverse light or a washer motor wiring to power the camera instead of using the power from the head unit which has canbus.
soldering is always better. do the pull test and you'll see . but not everyone has solder..
Have wired a good few reversing cameras in past, mainly on excavators and trucks and this one I bought for my VW caddy threw me off. Spent ages neatly wiring it into tailight loom and was puzzled when it didn’t work. Would have been handy if stero manufacturer labelled cables. I was sure the little blue wires were the signal ones. Will have to go back out to workshop now and get it sorted, cheers for the good video, don’t know what I would have done without it
Can someone please tell me about 7:58 what happens if we connect the red wire to reverse tail light like we would in a non canbus model car ( i assume the power gets taken from both reverse light and stereo)
Is that going to damage something??
Or is it just there to save extra effort to not connect them to reverse light power positive???
Thanks
Hi 👋 the power comes from the canbus. If you connect it to the reverse light as well it will send a unnecessary signal when in reverse and it could damage the canbus after a while, which will then cause the radio to not function properly.
@@audiovisionusa @AudioVisionUSA okay thanks so if we so have canbus, its best to wire like in the video first, and then if still not working like this then only connect the red rear to power positive from reverse light. Got it thanks. Will avoid wiring like normal.
I was just unsure because I'm buying canbus for an older car like 2005 opel corsa c, so unsure whether that canbus would be sending reverse signal or not (its mainly for steering wheel control i think).
Can i just another question if we need to plug rear red to power positive, can we still do that (if wiring like in video isn't working) and then not connect the red power from yellow RCA to front of radio?
Thanks again your very helpful
@@divyanshugogna6152 if it automatically switches to reverse without the camera being connected then the canbus triggers the reverse camera. If it doesn’t then you have to wire it like the other video we have. If you have manual transmission you will most likely have to wire it directly to the reverse light
@@audiovisionusa its automatic transmission, and it show what gear is vehicle in on car's dashboard, so i guess canbus should automatically switch it.
I will wait for stereo to come and report back thanks again.
Then? What's your report? Regards
Where do i plug the ground cable please ?
I was so happy that I found this video, my car has canbus, tried today this method (not attaching to the “+” of the backing lamp) but still doesn’t work :(
What else could be the problem?
I did not understand the last wire on the camera. Where should the black wire be connected? Connect to ground? Can someone explain where this cable will connect to?
Thanks very much I saw a 100 video until I found you.but mine who's need to connect to the back up light for power 12v
I have a 2011 silverado with a factory camera, how would i go about hooking it up, i believe my stereo is similar to the one in this video! Thanks in advance 😊
This didn’t work for me. The 3rd wire on my Android 13 is brown, when I put it in reverse there is no voltage going to the trigger wire from my canbus. Any ideas?
hello, i installed a new multimedia on my ford fiesta, but i have a problem, the parking sensors don’t display when i go in reverse, they do when something is in front of me, but never if it’s behind me, while if something is in front and the display triggers, i can see both front and back perfectly… any advices?
Hey man, thanks for the info. I was stuck on which wire to use for the reverse trigger. And I used the brown wire as there was no pink one in my loom.
This was a small project I was doing with my son, and we had fun... a lot actually, especially with your hand gestures...😀
So thanks again.
All the best.
Where did you coonect to Ground black wire?
It needs to be grounded to the vehicle. Find a metal spot somewhere close the camera to attach it, preferably underneath out-of-sight. You may have to drill a hole and use a screw if you can't find anywhere.
Are you running an automatic car? I followed everything but cant get the head unit to pickup the reverse trigger from canbus. I tried installing on a Manual (stickshift) Honda.
This fixed my issue of the camera not coming on in my Corolla with an android screen. It was a brown wire not labeled so yeah I would have never figured this out. Great video!
Having a car with Can bus system and applying this method will not void the car warranty right?
What if my car already has a factory backup camera, what process changes here?
Did you manage to get it working? I will.remove the oem today finally, and see if i can replace for a better one!
Thank you for sharing 🙌🏽 Very helpful! In your vid you stated the trigger wire is always the 3rd wire next to the red wire and colors may vary. Will this stay true, even if the wiring harness or head-unit is not the same as the model here? My audio vision unit’s 3rd wire is brown and runs from it into the maroon canbus module. Just wanted to confirm 👍🏽 Thank you in advance!
He probably can't say yes for sure, now that so many models are out now. You could try a test light on the plug to see what it powered when the car is shifted into reverse?
@@jonny5ive167 Okay, sounds like a plan bro. Thank you 👌🏽
If you put power to the camera why dont it come up on the screen, instead of no signal?
Does this works if your car already have a factory reverse camera? Thanjs in Advance
Anyone know where does the other end of the trigger wire goes to? If the canbus which slot? Thanks
You say dont connect the wires to the tail light. Than where should i connect them?
Do I have just connect the red wire from RCA cable with the red from the power supply and i dont have to connect them anywhere else?
I managed the camera to work. But it was necessary to connect it to the supply of reverse light. I cant see how it should work on any other way
Thanks. When headunit deep sleeps, if i put reverse it says no signal until android fully boots any tips for this?
Unfortunately.. nothing here to tell me why my oem backup camera isnt working
Can you zoom in and out? Mine seems like it is zoomed all the way in. And can you have the green, yellow and red caution lines?
Thanks to you @AudioVisionUSA I just got it installed tonight on my VW MK6 after watching tons of YT videos, yours nailed it simplified! Saved me $AU 150 in labor fee bigtime!
What happens if I connected to my reverse light ? It’s a canbus car and all works well cheers
After wiring like thus, how do i view rear camera while driving? Dont i need +12v on the red wire near the camera?
What do you mean ground negative? Does the black wire go into the reverse light?
F-250 install....Thank you so much. Just like you said, regardless of wire color (mine was Brown even though the manual diagram showed Pink) the Third from the Ground splice between the CAN box is the Ticket!!!! I have been back and forth with the customer service rep and technician sending generic videos and fuzzy pictures from the slow boat from china Alibaba company (Reako Sounds plug and play K2001N Android 12) that I bought mine from. So for $50 bucks, I really can't complain!
How can i connect the black wire to the ground? Some help? Thank you
Some videos are talking about a relay to add but i found this useless...
I already have an onboard reverse cam, how do I connect this to an android head unit?
This works with a honda civic 2016? , i bought an android stereo with canbus and i want to install it like thiz
I hope this works. I already had a camera hooked to My Jeep u connect radio and I just hooked the rca to the new radio and of course just static. When car goes in reverse it switches to camera screen but static signal. And it worked fine with uconnect. I got to take it back out and try this wire thing. 🙏
It sounds like you need to change the camera settings
Got a blank screen when put into reverse? Any ideas anyone?
The two small blue wires are aerials for Bluetooth and Wi-Fi connection.
Hi,
My car is 2012 Honda Accord and recently installed android Radio then installed backup camera. When I turn on Reverse mode, the camera turns on (led light turns on) but the no video it ahows only black screen.
1-I have connected one end cable to radio Cam-in rca yellow jack and spliced red cable to other cable labelled as back.
2- connected other yellow rca jack to camera yellow jack, red wire spliced to power card red wire then both spliced to reverse light blue cable and connected power cord to camera black rca jack.
3- power cord black wire spliced to reverse light black cable.
Not sure what I did missed over here, but not seeing camera video on screen.
Can someone suggest what I am missed here?
did you ever get yours working? Cannot get video on mine either.
I have a fuzzy image whaen i shift to reverse, i did everything sane with the guy in the video? Can soneone help me with the problem?
Change the camera settings on your radio
My Honda already has a backup camera, how does that work? I appreciate any assistance! 🙏🏼
I did all that but my camera is not working, I have T’eyes c3, in instruction says to wire the red wire to pin 3 which is Accessory and yellow wire to pin 5 which is trigger wire. With all that no image. At the back connected like you did on yours. Do you have any suggestions?
It's a non sense. Accessory wire send 12v constantly when ignition is on. The camera will be always powered when u drive. And the cable camera going to the head unit has only the video connector and a little red wire. This red wire should be connected to the trigger and plug the yellow connector with the yellow "camera in" connector of the head unit.
I got a lot of interferences. What should I do? Please, help
where do you install it onto the back of a 2012 dodge ram?
Thanks a lot, this helped me a lot, the instructions were misleading but after watching this video I managed to have the camera working 🎉🎉
Se collego il cavo rosso dell'rca video al filo retro marcia il filo rosso dietro l'autoradio al cavo marrone cambus e il filo dello spinotto rosso e nero +- il filo rosso ad una fonte a 12 volt allora tutto funziona bene però così la telecamera rimane sempre alimentata fino a quando si spegne l'auto
Very clean! Good job! I have a question: in my android radio have “video in” cablejack. Its ok there? Is the same?
No, it’s not the same. You should have a single connector dedicated to the camera. Thanks for watching.
I'll try it out this evening, ive watched so many videos and never even heard of "can bus" systems. apparently my dodge grand caravan has one!
Did you get this to work on your caravan?
Great video, Is there any chance that you can make something simmilar for those android head units with canbus installation for audi b8 (a4, a5, q5) (2008-2015)? Thank you in advance.
Fitted a camera to a mitsubishi asx , cannot get a image from it .. changes to a black screen when I put the car into reverse..but just a black screen ??
ever get yours working? Having the same trouble with mine.
Mine is a different connection much straightforward and simple and it works well
Thank you for the tutorial.
The manual the installation of camera says if have a canbus, its not necessary to ground the black cable. So I would like to know if ground or not, can you help me, thnakyou
Did you ever figure that out ?
“That’s baby makin’ music right there… “
-Sir Ron Burgundy
Ciao complimenti per il video veramente spiegato bene io ho fatto la stessa cosa ho una Fiat fre emont ho montato una radio multimediale però prendendo il cavo nel mio caso dal cambus marrone però quando collego il cavo rosso dello spinotto e il cavo rosso dell'rca giallo video la telecamera non si vede non arriva il video non capisco e non trovo soluzione
I just installed this radio in my Jeep jk 2007 model with factory amp. But I bought a reverse camera that mounts to the rear tire Carrie. I followed these instructions but the rear camera doesn’t have same connection. It has a black one with 4 pins that goes to camera and the front before camera connected to pins has the black and red wires that comes off the main wire. Would I just connect the 4 pins connector and open the end to camera to find red wire and splice into it and ground the black wire.
Hi, thanks for the video....but how does camera know when to work when it is not connected to reverse wire?
The signal is sent by can bus system.
How do i connect it if I only have a red cable on the one side of the yellow rca, the other side is a 4 pin connector and red and black wire
A mi me pasa lo mismo. No sé cómo solucionarlo.
Does the first part of this, splicing to pink wire, apply for a factory camera?
No
How do I wire up a front camera?
Had someone done that with a Bmw e46?
This just saved my day!!!!
Hi, I followed the procedure step by step to connect the rear camera to the car radio. When I put the car in reverse the LEDs light up but nothing comes out on the screen. can you help me?
did you ever figure this out?
I managed to make the connections only that the signal seems to be disturbed and the image is visible like old TVs when the signal is poor. Can someone help me?
Is it necessary to connect the black wire to the ground? In my case it's working without it. Anyway, thank you for your video.
For some models it isn’t necessary
Heya. Im having trouble with the camera. It works fine to be fair, but at night it takes atleast 8 seconds for the brightness to adjust. Is there a possible way to have the camera stay on (not visible on screen) as soon as the rear lights turn on? Thanks for the great video btw
Your unit is probably slow or faulty. With Canbus, as soon as you go into reverse it will signal your camera, if it’s not adjusting then no wire changes will fix that. Even if you link it to your taillight I’m pretty sure it would still do that, not sure just my thought
@@raquellewis7294 I dont think my unit is slow nor faulty. The iso and all that is controlled by the cam so it probably takes a minute to start up and adjust it all. My thought was that i might be able to circumvent this by having it powered all the time.
u have done great favor for me , just did it like u said, dada, working.
Thank u - a simple video that made my life easier- thank u
This video right here! This is the one that I have been looking for. Followed the steps on my BMW 335i and it worked perfectly with my Eonon head unit and backup camera. Thanks for the info. The trigger wire from the canbus is the key.
Where did you Connect the trigger cable? Pink or Brown?
@@AlbertoTV85 start watching at 2:10 in the video. It shows it.
@@AlbertoTV85 pink
But what about OEM camera??
Can you splice into the trigger wire behind the radio or do you have to use the butt end connector?
You can splice into it