Jesse Dean Designs JDDDSSB START STOP BUTTON KIT INSTALLATION GUIDE

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии • 29

  • @lucasmaynes7523
    @lucasmaynes7523 5 лет назад +5

    That's Sids hands 🤙

    • @lamentpnw8662
      @lamentpnw8662 5 лет назад

      Lucas Maynes haha omg good eye that totally is

    • @artpena3266
      @artpena3266 4 года назад

      That must kill tatoo

  • @javierpesas
    @javierpesas Год назад

    Hello master, I have a pt01 scratch it doesn't turn on. It could be the jack input that is loose from the Board, for that reason it does not turn on. I'll try soldering it loose... Greetings from Chile

  • @SarahJcksn5-j1r
    @SarahJcksn5-j1r 2 месяца назад

    Hello just finally got it today !! After few days of no working ,Even if i followed every step of this video, i just Forgot to Twist the two little cable of the original switch start/stop of the tone arm that we cut … just twist cables or put a crimp if you have that … and it finally works !!!! And this is cool because i didn’t find my mistake since One week ……. !! 🛟🥺🥺😅😅

  • @cutdafukup
    @cutdafukup 5 лет назад +2

    Right on man nailed it.. now to take that step drill bit back to the Home Cheapo $45!!!!

    • @jeffreyonyx6860
      @jeffreyonyx6860 3 года назад

      I know I am kinda off topic but do anybody know of a good site to stream new tv shows online?

    • @leoneljace4650
      @leoneljace4650 3 года назад

      @Jeffrey Onyx i use Flixzone. You can find it on google :)

    • @shilohkristian966
      @shilohkristian966 3 года назад

      @Jeffrey Onyx I watch on FlixZone. You can find it on google =)

  • @martinlarsen1990
    @martinlarsen1990 4 года назад +2

    I bought your arcade button kit with the relay, followed all the steps in the videos, and it worked a few times, but not at all anymore..? what can I possibly have done wrong, and what can I do to make it work properly? because it works some times, and then it stops working... then I lift up one side of the Numark so it's almost tilted over, and then it works a few times... then doesn't work again. it's kinda frustrating.. plz reply.

    • @BoyShortWonder1
      @BoyShortWonder1 4 года назад +1

      In the same boat man, looking for some FAQ's about the chip/button failing

    • @bugbolito
      @bugbolito 7 месяцев назад

      Me too , the motor it’s on and the button don’t do nothing any support please

  • @CL0819
    @CL0819 4 года назад +1

    why the open hole at the fader in the cover at 0:54

  • @onkelhiphop
    @onkelhiphop 4 года назад +2

    I lost my smash crimp conektor 😩 what to do?

    • @housewyfe
      @housewyfe 4 года назад +1

      I did the same hahaha I'm gonna see if I can't suss a replacement somewhere

  • @fngltrax
    @fngltrax Год назад

    Would this mod work with the ion iPT01 as well?

  • @YCGSQK
    @YCGSQK 6 лет назад +1

    Will I still be able to play 12 in. Records? Thanks in advance, just got the jdd contactless fader.

  • @rottenandremixedrecords
    @rottenandremixedrecords 3 года назад

    I need one of those dope upgrade awesome video

  • @jackofalltrades3011
    @jackofalltrades3011 5 лет назад

    What’s the difference between the analog and digital button?
    And do both start and stop button without moving the tonearm? Asking because this would be a good mod for the Phase DJ.

  • @chemicalcreep
    @chemicalcreep 3 года назад

    How can you tell which version turntable you have

  • @gamingheadztvMediaHeadztv
    @gamingheadztvMediaHeadztv 6 лет назад

    Nice . Is there a way to add a pitch?

  • @justinsalvan1842
    @justinsalvan1842 4 года назад +2

    I installed exactly as described and my button is not working

    • @loeil2loizeau876
      @loeil2loizeau876 4 года назад

      you must remove the original start/stop, the little black plastic piece under the arm ;)

    • @TAPE5IVE
      @TAPE5IVE 8 месяцев назад

      I had the same problem and it was because I had forgotten to crimp/twist together the wires from the OG tone arm switch. Once I did that it started working :)

  • @phenomena17
    @phenomena17 5 лет назад

    can i disconnect the fader switch and replace it with JDD start/stop button???

  • @gwrex
    @gwrex 4 года назад

    What about the ground install for the JDDDSSB V2 ? It doesnt show that step . Unless it’s the same as V1 ?

    • @VapeCheff
      @VapeCheff 4 года назад

      Same grounding procedure as the V1

  • @GlennMilllerThe3rd
    @GlennMilllerThe3rd 5 лет назад +4

    Damn dog! Yall need to include a lil tool kit with every purchase 🤦‍♂️
    Definition of frustrating! 🤬

    • @housewyfe
      @housewyfe 4 года назад +1

      I dunno, man - if you don't get that this is kinda DIY stuff it might not be your cup of tea.