Cool that it's plug and play with the OG JDDX2RS. Interesting to see that this got to market before reck.la's project with innofader, unless he was collabing with Jesse Dean. Glad to see a contactless fader that fits perfect.
Just when I was thinking that I wished there was a contact less fader that just fit right in the pt01 scratch. I can already see the awesomeness going from the scratch switch to the jddx2rsa. Just like when I first modded my pcv fader...but better. Thanks a bunch for showing me this swift!
Stanley N. You can adjust the Magneto too from the inside. I think that JD adjustment screws are kind of useless cause we usually adjust the fader once 🤷♀️
@@ichinoize3978 just finished installing the jddx2rsa.....I don't like it. It's too nice. Also, too smooth with a ridiculously sharp cut. I think I just got too used to the switch lol. Had to set a huge gap on the end for my cut in point.
I REALLY LIKE THIS VERSION. AS MUCH AS I LIKE THE OTHER ONE, IT REALLY DID NOT HAVE THE FEEL OF MY Z2 OR PIONEER 909 SO THIS IS GREAT !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Dope cuts! I like how you can remove cut-off on the other side. Not uncommon for me to accidentally cut out the sound on the opposite side due to old habits from traditional gear.
what beauty your numark !! Do you consider that the improvements in the new crossfader make it superior to the previous one? I ask you because next week I was going to buy the 1st model, but now I want to buy this one. It's 30 dollars more but if you tell me it's really worth it, I invest in the 2nd one. I a few months ago that I bought a pt 01 Scratch and I'm full with practice, greetings from Catamarca Argentina. very good your channel!
Bro is my normal I guess the first Jesse dean contactless fader not the adjustable one from exterior it’s silent on both ends is that how it should be their sound in the middle but on both sides it cuts off very sharp to silent on both sides SO THAT IS INSTALLED CORRECTLY,I HAVE THE UPGRADED FADER U CAN ADJUST WITH INCLUDED TONE ARM I JUST WANTED TO SEE IF I COULD INSTALL IT CORRECTLY.AND IF BOTH SIDES SHOULDNT BE BARELY SILENT WHAT DID I DO WRONG IM NOT YELLING LOL IM LAZYB I HOPE I INSTALLED RIGHT
Yea the gold colorway was limited to artist and beta testers of the fader only. But I'm sure I could get one out to you. Send me an email and email and we could get that started.
Yes Swiftstyle luvin you're chanel man,need some advice if you don't mind,what are the pro's and cons of having the fader open at both ends,I'm still getting used to my new jesse dean fader from the original scratch switch and would appreciate you're advice man👊
There is no advantage to having the fader cut on both sides unless you are trying to learn regular and hamster cuts. If you are just learning I would highly recommend cutting off one side. Some people do this transforming scratch by hitting both sides of the fader while running through the sound but IMO it's a cheap way to sound like a complicated scratch.
@@Swiftstyle thanks man,I'll take you're advice on board,I've had the fader set both ways but was thinking to close one end again,so thanks for that man,I'm switching back. Awesome channel,awesome job 👊👊👊🤘👍
I installed my fader and for some reason the audio is backwards, it cuts on when the fader is all the way to the left or all the way to the right and it cuts off when moved inwards, can anyone help?
How would you go about diagnosing the fader popping ? I have a Pioneer DJM 600 with the Mini Innofader DJM installed, it pops on the right side, not loud but enough to notice. Any advice on how to go about rectifying this would be greatly appreciated. ✌️
Hey Swiftstyle, Since you own a fader cap of DJ $HIN could you please tell me if it would fit the Innofader Pro 2? I‘m in Osaka right now and $HIN wasn’t sure about it, so he couldn’t answer it to me. Thx a lot in advance man!
Ovenpaa A.W.S.M. I didn’t , I got so frustrated I was about to throw it out and go buy a Spin Portable Turntable, I’m going to try contact Jesse Dean Designs for support first but I think they probably shipped out a bad batch of faders, it definitely wasn’t doing that before, maybe they can send us a working replacement?
@@mago777 I think your right. It's a bad batch. Some other dude is having the same problem and there is a reply from portablismgear and they had a issue with a mod build I think. A replacement solved the issue. Ive got mine from portablismgear and I'm waiting a reply from them. You should contact the seller.
Ovenpaa A.W.S.M. Thanks for confirming it’s not just me 😅 I bought it from a local DJ store in New York City and they were like “we don’t know anything about contact the manufacturer” ☹️
just got my fader today probably a simple fix but whenever I put the fader to the side to cut out the audio I hear a popping sound the audio doesn't play but its a loud popping sound pretty annoying if anyone knows the solution
![Numark pt01 boost and stereo speaker mod [EN SUB]](/img/1.gif)
Wow. There are so many options for after market fader mods for the pt-01. That’s awesome. The competition keeps everyone improving.
Cool that it's plug and play with the OG JDDX2RS. Interesting to see that this got to market before reck.la's project with innofader, unless he was collabing with Jesse Dean. Glad to see a contactless fader that fits perfect.
Just when I was thinking that I wished there was a contact less fader that just fit right in the pt01 scratch. I can already see the awesomeness going from the scratch switch to the jddx2rsa. Just like when I first modded my pcv fader...but better. Thanks a bunch for showing me this swift!
yessir!
There was the Magneto NCF for some months before this model. This seems a copy actually.
www.magnetofader.com/product/magneto-ncf-v1-1
IchiNoize Oh dang. Does look similar. I do like the adjustments on the jddx2rsa.
Stanley N. You can adjust the Magneto too from the inside. I think that JD adjustment screws are kind of useless cause we usually adjust the fader once 🤷♀️
@@ichinoize3978 just finished installing the jddx2rsa.....I don't like it. It's too nice. Also, too smooth with a ridiculously sharp cut. I think I just got too used to the switch lol. Had to set a huge gap on the end for my cut in point.
woiii, i just got the original fader, wish I had waited a few weeks. Keep up the good work Freddy
Time to build a second portable lol
I personally like the 2 sides cut. That's just me though. I can move my hands back and forth better than trying to crab etc
Thanks for the video Freddy. Can you please do a video on the that new start /stop button?
godbott I believe it's a Jesse Dean upgrade.. Comes with a new tonearm and they install a start/start button
I REALLY LIKE THIS VERSION. AS MUCH AS I LIKE THE OTHER ONE, IT REALLY DID NOT HAVE THE FEEL OF MY Z2 OR PIONEER 909 SO THIS IS GREAT !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Dope cuts! I like how you can remove cut-off on the other side. Not uncommon for me to accidentally cut out the sound on the opposite side due to old habits from traditional gear.
Yooooo that diamond tip tho! 😍
what beauty your numark !! Do you consider that the improvements in the new crossfader make it superior to the previous one? I ask you because next week I was going to buy the 1st model, but now I want to buy this one. It's 30 dollars more but if you tell me it's really worth it, I invest in the 2nd one. I a few months ago that I bought a pt 01 Scratch and I'm full with practice, greetings from Catamarca Argentina. very good your channel!
Yes, spend the little extra it will be worth it in the long run!
What's the difference between this (contactless) and the OG in board fader?
The one that came with the original unit or the first model of the jesse dean fader?
Bro is my normal I guess the first Jesse dean contactless fader not the adjustable one from exterior it’s silent on both ends is that how it should be their sound in the middle but on both sides it cuts off very sharp to silent on both sides SO THAT IS INSTALLED CORRECTLY,I HAVE THE UPGRADED FADER U CAN ADJUST WITH INCLUDED TONE ARM I JUST WANTED TO SEE IF I COULD INSTALL IT CORRECTLY.AND IF BOTH SIDES SHOULDNT BE BARELY SILENT WHAT DID I DO WRONG IM NOT YELLING LOL IM LAZYB I HOPE I INSTALLED RIGHT
Do you have to remove the capacitor for this version? KILLER scratching, man.
Yes
Damn. Seems hella worth it! 👊 Open Format doesn’t seem to carry the black / gold colorway. Is that a limited run?
not sure. send them a message
Yea the gold colorway was limited to artist and beta testers of the fader only. But I'm sure I could get one out to you. Send me an email and email and we could get that started.
Open Format Jesse got me covered. Thank you tho! 👊
Just curious is the chroma cap fader switch fits? Love the vids you got a new subscriber fa sho
Yes Swiftstyle luvin you're chanel man,need some advice if you don't mind,what are the pro's and cons of having the fader open at both ends,I'm still getting used to my new jesse dean fader from the original scratch switch and would appreciate you're advice man👊
There is no advantage to having the fader cut on both sides unless you are trying to learn regular and hamster cuts.
If you are just learning I would highly recommend cutting off one side. Some people do this transforming scratch by hitting both sides of the fader while running through the sound but IMO it's a cheap way to sound like a complicated scratch.
@@Swiftstyle thanks man,I'll take you're advice on board,I've had the fader set both ways but was thinking to close one end again,so thanks for that man,I'm switching back.
Awesome channel,awesome job 👊👊👊🤘👍
oooooohhhh diamond tip fader cap!
Hella Sick!
How can i order the thing sir? Thank you sir..🙏🏼
I installed my fader and for some reason the audio is backwards, it cuts on when the fader is all the way to the left or all the way to the right and it cuts off when moved inwards, can anyone help?
Having the same issue over here
I need this 5 Fingers Sticker and the Hand ,really nice ..!
However can i buy this ?
How would you go about diagnosing the fader popping ? I have a Pioneer DJM 600 with the Mini Innofader DJM installed, it pops on the right side, not loud but enough to notice. Any advice on how to go about rectifying this would be greatly appreciated. ✌️
Hey, where can I buy one of those dope fader caps please, I can't find them anywhere.
Name of beat please!!!! 4:13
How did you do the design on the pt01 face plate? Is it a sticker silk screen ?
Hey Swiftstyle,
Since you own a fader cap of DJ $HIN could you please tell me if it would fit the Innofader Pro 2? I‘m in Osaka right now and $HIN wasn’t sure about it, so he couldn’t answer it to me.
Thx a lot in advance man!
It should, It has a moldable bottom.
Swiftstyle Awesome! Thank you for your answer.
portable fader diy video please
I need that beat ! Where can I find it?
I just installed my new Jesse Dean contactless fader 🎚 exactly as the instructions and I hear Audible popping sounds on this fader 😫☹️
Did you figure out how to fix this issue? I'm having the same problem.
Ovenpaa A.W.S.M. I didn’t , I got so frustrated I was about to throw it out and go buy a Spin Portable Turntable, I’m going to try contact Jesse Dean Designs for support first but I think they probably shipped out a bad batch of faders, it definitely wasn’t doing that before, maybe they can send us a working replacement?
@@mago777 I think your right. It's a bad batch. Some other dude is having the same problem and there is a reply from portablismgear and they had a issue with a mod build I think. A replacement solved the issue. Ive got mine from portablismgear and I'm waiting a reply from them. You should contact the seller.
Ovenpaa A.W.S.M. Thanks for confirming it’s not just me 😅 I bought it from a local DJ store in New York City and they were like “we don’t know anything about contact the manufacturer” ☹️
@@mago777 that sucks. Its a known issue now. They should replace it 😒
Which replacement tone arm is that please?
What do you use to record the sound from your PT01?
Ableton
just got my fader today probably a simple fix but whenever I put the fader to the side to cut out the audio I hear a popping sound the audio doesn't play but its a loud popping sound pretty annoying if anyone knows the solution
I wonder if that would work with a ddjsr2
🔥🔥🔥🔥✂️✂️✂️✂️
😂 that fader cap.
What do you have as your tab inserts on your PT01?
They have them at Open Format