How to Install SuperStoke Putter Grip Step-by-Step without a vise
HTML-код
- Опубликовано: 14 окт 2024
- positiveenergy...
Here are the links for Everything you Need:
Grips:
SuperSroke Traxion Pistol Grip 1.0 Black/White/Blue: amzn.to/46EeOuO
SuperSroke Traxion Pistol Grip 1.0 White/Grey/Red: amzn.to/3PPoixf
SuperStroke Traxion Tour Golf Putter Grip 3.0 White/Grey/Red: amzn.to/46AJdKx
Double Sided Golf GripTape: amzn.to/3JQoXee
Grip Tape Activator Solution: amzn.to/3O4n3ZR
Utility Knife: amzn.to/3XIsrVE
Hook Blades: amzn.to/3D66B4Z
12" Pan: amzn.to/44gru9G
Step-by-Step How to Install SuperStroke Putter Grip
Purchase your new SuperStroke Putter Grip - Check Prices on Amazon Here
Gather all needed supplies to install your SuperStroke Grip (Double Sided Tape, Grip Tape Solution, Hook Blades, Utility Knife, Mud Pan, Acetone, and a towel)
Grab your putter
Remove old grip by inserting hook blade and pulling away from you, peel back the grip. If you have any tension just reinsert the hook blade as you are peeling back the grip, it should come off pretty easily.
Remove old double sided tape. Use utility knife with a regular blade to scrape off the tape, it should come off pretty easily. Wipe it down with the acetone to remove the old glue.
Measure double sided tape to the length of your new putter grip and cut it
Apply the double sided tape to your putter leaving a little over hang at the top of the putter shaft, tuck the tape into the hole at the top of the putter shaft.
Wrap the tape around the putter shaft and remove the other side of the tape exposing the outer sticky part of the tape
Pour your grip tape solution onto your new putter grip holding it over your mud pan while plugging the hole on the bottom of your grip with your finger.
Once the grip is full with the solution pour it over the double sided tape, which you can just pour it or remove your finder from the hole in the bottom of your grip and let it flow out over the grip tape, either way will work fine. Either way hold it over your mud pan so you don’t make a mess and can save the tap solution as you can reuse it.
Slide your new putter grip onto the shaft and over the double sided tape, it should slide on very easily.
Once on, tap the end of the club on the floor a few times to make sure your golf grip is all the way on.
Once on you will want to line up your grip with SuperStroke facing front and the gray line facing back (SuperStroke should face the hole and the gray strip should face away from the hole when holding your putter) Please note that you have plenty of time to line this up so there is no need to panic and rush through this. Test is out before setting it aside to dry.
Wait 3-4 few hours (I usually wait 24 hours) to give it time to dry.
Installing your new SuperStroke putter grip at home without using a vise is no big deal and should only take a few minutes to complete. If you have any issues, comments, tips or tricks I would love to hear from you. I again appreciate you taking the time to stop by and I hope you found this post useful.
![[4K] Watch SpaceX Catch A Starship Rocket From Space!!! #IFT5](http://i.ytimg.com/vi/pIKI7y3DTXk/mqdefault.jpg)
hey man local golf shop closed down, just got a new putter and can’t put without the super stroke! really helpful video. Thanks for taking the time to make it!
Absolutely glad to help and nicely done :)
This saved me a ton of time thank you. When I slid the grip on it seemed some of the tape grime was sliding down the shaft and I had to clean it up off the bottom after. This normal?
Your welcome, glad to help and yes that is normal. I appreciate you watching.
I use my dads clubs from the 90’s when I golf for my team and wanna breath some new life into for the upcoming season thanks
My pleasure and new grips really makes a difference. Have an awesome year :)
Great job thank you. You helped a 78 year old I fell now that I can do this.
So awesome, really honored to help. I appreciate you watching and hope you have an awesome day
@@Positive_Energy727 Thank you
Nice video...will be doing the same to my trusty old Odyssey tomorrow!
Appreciate it and your going to love it, thanks for watching :)
Cheers for your help worked a treat my dude so helpful and handy 👍 👌
My pleasure, so glad it helped. Appreciate you watching ;)
Good video. I like easy directions because I tend to screw it up if it’s not. Thanks
Lol my pleasure and totally feel you there. Thanks for watching and have an awesome day
I've got that exact same putter and was thinking about adding some new life to it with one of these grips. Thanks for sharing.
My pleasure and let me know how you like the new grip :)
This helped me a great deal, thank you Sir for such an informative and detailed instructional video. Stay safe!
My pleasure and greatly appreciate you. Have an awesome day
This helped install one on my old odyssey dual force 660
That is awesome and grateful to be able to help :)
Got my first spider putter coming ! Thanks for the video bro!
Awesome! My pleasure really appreciate you.
Thank you this really help
My pleasure glad to help ;)
Hey superb video - which exact superstroke grip did you use please?
Appreciate it and thanks for watching. I used the 3.0 in this video which you can find here:
amzn.to/46AJdKx
I also installed a 1.0 which in my opinion was to thin for my liking and feel. I like the feel of either the 2.0 or 3.0
So the flat bit goes at the front?
Yes, so the flat part where it says SuperStroke should face away from you when holding the putter which will be in line with the putter pointing away from you as you line up your ball
It appears as though you installed the grip with the flat side matching the putter face. Was that what you wanted as It is usually the flat side at 90 degrees to the face?
Gary, great point and yes i have done it both ways and found that way too work better for me. I should've mentioned that in the video to set it to your preferred liking.
What is your solvent to slide new grip ?
Here is the link for the
Grip Tape Activator Solution: amzn.to/3O4n3ZR
Thanks Mike.
My pleasure, appreciate you watching. Have an awesome day
I use wd40 for all my grips but have to slide on quick and position
I like it easy to install very good
I appreciate it and yes easy peasy
So after do you clean the grip with soap or water or just leave it with the solvent on it? Thanks
I just wipe it down with a towel
How long should you wait before you use the putter? Any curing time needed? Cheers!
You should be good to go after 3-4 hours, however, I usually wait 12 or more.
Many say 6 months.
@@jokojay1 6 years for me
i've put a new grip on a driver and used it 30 minutes later at the course. putter would be more than ready to go after 15 minutes or so
Just a word of caution, these grips can be difficult to fit. I used twice as much solution to provide lubrication and thinner than normal double-sided tape. 👍
Do I need to double-sided, sticky tape to regripmy putter?
In my opinion yes as you don't want the chance of your grip moving
well done.
Thank you, really appreciate it and appreciate you. Have an awesome day
Is that a Rossie 2? I’m still using mine as well
Sure is! Tried many other putters but I keep going back to my trusty Odyssey. I appreciate you watching. Have an awesome day
@@Positive_Energy727 you too!! Adding a flatso to my rossie after work ❤️
A couple things. First, you don’t take a full swing with a putter so in reality you only need tape half the length of the putter grip. I only go 3/4 on my driver and less as I go down the clubs. Second, if you do put in a counter balance weight don’t cove the end of the shaft with tape. To align the grip place the putter face against something square and align the grip by sight with the face against the square edge object but be quick. You have only a couple minutes to rotate/adjust the grip before it seats. But it will rotate.
Appreciate you watching and appreciate the info. Have an awesome day
Where is the list of things you need you said you would put in the comments?
I did forget to put that didn't I, here is the link for everything you will need:
positiveenergygolf.com/2023/07/10/superstroke-3-0-grip-change-to-traxion-pistol-gt-1-0-putter-grip-how-to-review/
@@Positive_Energy727pop
@@Positive_Energy727
Where is the list
@@Positive_Energy727 7:54 7:54
I'm going to replace my putter grip tomorrow.
That's a lot of views and he doesn't show most of what he is doing. The camera is on him and not the putter?
lmfao I'm regripping that same putter
That's awesome and still love this putter :)
You left out the MOST important feature which is exactly how is the grip aligned!!! You TALKED about it, but did not SHOW a decent picture of the finished product. You seem to be a really nice guy, but we tuned in to WATCH - not HEAR how to do this
Appreciate the comment Timothy. I showed it a little better on this video
ruclips.net/video/sHC9OhyCi5c/видео.html
Hope that helps. I appreciate you watching and hope you have an awesome day
Thank you, Michael!! @@Positive_Energy727
If you don't know. You should probably have the pro shop do it for ya
Damn your mad why chill out bro
A word of caution with a Super Stroke, because the top is flat if you don’t get it lined up perfectly you will have lots of trouble squaring the putter face at contact with the ball. Which means putts right and or left.
Awesome awesome
Appreciate you :)