What's The Tallest Lego Minifigure I Can Make?
HTML-код
- Опубликовано: 28 мар 2024
- What Lego pieces can I combine to create the tallest Lego minifigure?
⭐Subscribe⭐
/ @brickstudiosyt
My Links:
linkpop.com/brickstudios-slug...
My Website:
sites.google.com/view/brickst...
Gaming Channel:
/ @salienceyt
Business Inquiries:
legoisawesomeness@gmail.com
#brickstudios #lego #shorts Развлечения
Get some of our custom Lego instructions & help support the channel! brickstudios.store
Add the lord buissness leg extender pieces
You should add a belt, lots of neck accessories and a Loki helmet on the avatar head
YOu need one torso piece what is In one Lego ninjago set what have Zane, Kai, guard, pirate and finally, Stones warrior Who have 4 arms, two torso piece at same size and it is the old Lego ninjago prison set
Cursed minifig
Use the giraffe hat piece to make it taller
You can add a Batman Utility Belt for a little extra height.
And some armour on the chest or sm like that,
@@TheRealSealStudios u can't becuse of the extra torso
@gergovida6570 good point, but an epaulette might work
Or a neck clip
I’m pretty sure the ninjago shoulder pads could also fit
Marge has a much larger head
Edit: how is this my single most liked comment lol
Wait, you're right
and hairpiece
@@BradleyCarvalho-rd4otshe doesn’t have any hairpiece
@@BradleyCarvalho-rd4otshe is the hairpiece
@@BradleyCarvalho-rd4ot hair is molded in the head
"Hey how tall are you?"
"7 bricks and 1 plate"
7 feet 3 inches
Careful, this is basically what Sid was doing with his toys and we all saw how Woody reacted to that.
in one of the Lego Movie sets, Mr. Business used legs on which boots were attached - platforms that were not removable, in theory these are the longest legs in Lego
Why does everyone think they're non-removable; I have them and they are easily removable.
@@timewarpdrive77 in my case i only recently found out about it. They never came out of the character's legs
Buy a ton more Garmadons, put all the torsos together (the ones that connect) and give it the longer legs and head
Pong Krell + Garmadon + Gamadon + Skirt Piece + Avatar Legs + Ice Skates
Pong Krell + Garmadon + Gamadon + Skirt Piece + Avatar Legs + Ice Skates
611
Reply
I was also gonna say the skirt piece and ice skates, also any piece that goes between the neck and head like armor or a backpack or something
@@legotime6154stolen🤣🤣🤣🤣🤣🤣
Avatar legs ❌ - Enderman legs ✅
Fools, lord business' legs
I’m pretty sure Lord Business’ legs are taller (even without the brickbuilt part)
he has standard sized legs without the brick built boots
@@SauronIH nope. He has two black pieces (3 bricks tall, 2 anti-studs on the bottom of each) implanted into the bottom of his feet. I should know, I have him
@Seth_e_boi youre right, i was wrong, i believed the black parts to be separately attached, they are stuck on
Just take the hat
@@SauronIH No; the black parts are seperate, but they're specially made to fit in minifigure legs
For hat: giraffe head.
For head: infinitely stack head extension from the mad scientist minifigure.
Around neck: side cape, armor, and jet pack.
Torso: you can infinitely stack garmadon pieces.
Waistline: Lego Batman utility belt.
Legs: Lord Business legs.
Shoes: this is where it gets tough. Can you add the cylinders under the Iron Man mini figure? Can you include all of Lord Business’s legs? You could technically keep building forever with one by one bricks.
Remember, its not allowed repeat the same piece
Batman utility belt and Ninjago shoulder pads
U could use neck accessories because I actually tried this a few years ago and it made it much taller
Edit: thanks for the likes
With a Marge head?
@@moustafaalbaraa8450Yh that too but you could use a Loki helmet with the avatar head
@@moustafaalbaraa8450 sure I guess
What about the long neck aliens from Star Wars?
@@elliotgandersen Yh but they don’t have accessorie attachments do they ?
add a chestplate
And a utility belt
And a cape and waistcape
and flippers
2003 Cw pfp is huge W
Marge head
More torso pieces stacked onto one another.
You could get one of the more classic lord garmadons from the ultimate weapon and overlord arches its arms face the opposite way as the 4 arm torso you used. You could basically infinitely stack them but if you’re trying to only use unique pieces thats at least another two torso lengths
Add the Minecraft villager chest price and stack the extra Garmadon piece on it because the villager chest piece is taller
how about Hagrid's coat + Garmadons torso
@@BradleyCarvalho-rd4ot wouldnt work because hagrids torso is too bulky for garmadons to fit
The ultimate being
Add Nadakan chest piece as well
@@Soup_Whale99 But I think hagrid's torso is bigger than garmadons stacked on a regular torso
Add a belt or a tail piece. Then, add a backpack, armor, or what ever on the neck. The scientist from Series 14 has an extra piece for his large head, where you can put a hat on it, like a hat from a whitch. Finally, add roller scates or ice scates. I think, thats it.
Add foot pieces! Like the skis, Rollerskates, snowshoes, ice skates, etc
Alternatively, would you count the leg pieces that Lord Business steps onto, as part of the Minifig??
Batman utility belt+oxygen tank/moustache/face mask+ marge head
Give him a neck bracket, roller skates and a tail and he will be slightly taller.
What about the Baron Harkonnen minifigue from the dune copter set
That’s a normal fig with a really long cape so not really
@@TheEventHorizon909 oh 😔
More of the garmodon torsos I made one that was much taller than that. And don’t forget to flip the torsos around so the don’t overlap
What if his son Lloyd coming to see him that'll be crazy
I almost cried seeing Lloyd becoming the Green ninja
Add beard or something like that for additional hight.
Marge's hair/head, a Batman belt, those stilts from that one circus director figurine
Bro accidentally made a puppet master reference
Pong Krell + Garmadon + Gamadon + Skirt Piece + Avatar Legs + Ice Skates
611
Reply
Some of Garmadons additional torsos from his different iterations can interact with each other, meaning you could give the figure six arms using both this and the 2011-2013 figure piece
Pong Krell + Garmadon + Gamadon + Skirt Piece + Avatar Legs + Ice Skates
611
Reply
With the dune baron harkonen peice
yes.
You could add a belt as well as shoulder pads (assuming the pads are compatible with the torso), and then maybe a spongy cape, then a beard. Perhaps there’s even a taller hat, or one that you can attach a feather to that you could swap out!
Put more garmadon torsos together
Does Lord Business's long brink legs count?
Yeah I think they'd count, but I don't have them. Guess I better get them for part 2...
@@brickstudiosYTmultiple garmadon torsos
I was gonna say the same thing, he's gonna be like 20 bricks tall now 💀
There was that mad scientist from the monsters CMF series that had a super tall head that has a stud on top so you could add an even taller hat atop that head
Marge head, plus add another garmadon torso piece with a front-facing armor
The leg/dress peice from the tall guy in the Dune Lego set would make them over 10 bricks tall.
I could be wrong, but I think there was a snake head from Lego Ninjago that might be taller than the avatar head with the top hat. The only issue is that the snake head can’t fit a hat on top. Alternatively, you could take a normal mini figure head, but put on the hair piece that had a clip design built into the top/ponytail of the piece. Then, you could technically put either a long Star Wars blaster rifle, or any gun piece for that matter and possibly just start adding pieces to the end of it. Although, that last part feels like cheating. 😅
yes it is I have it
Try stacking the Monster Scientist’s head extension piece on top of the Avatar head. Then you can still add a hat of some kind on top. The tallest hat I can think of would probably be either of Abraham Lincoln’s from the LEGO Movie 1 & 2 CMF series.
Pong Krell + Garmadon + Gamadon + Skirt Piece + Avatar Legs + Ice Skates
611
Reply
Could you stack the head extention infintley?
The classic four-armed Garmadon has a different upper torso that you could set on top or in between.
President business up here laughing his studs off
You could use the lord business legs with the glued on sloped bricks to get even taller
Pong Krell + Garmadon + Gamadon + Skirt Piece + Avatar Legs + Ice Skates
611
Reply
The lord business legs aren't glued on; they've got pointed pieces on the top of the sloped bricks
Due to the design of that Garmadon extension piece, you could probably stack more on top of each other. There’s also a mad scientist minifigure that has a huge head piece with a stud on top allowing for even more height
Add the Torso of a minecraft villager
Garmadon with Woody looks like Six Shooter from Puppet Master.
One Marvel set had a female version of Mister Fantastic so her hands was a rubber tube that can really stretch.
To realize this, that minifigure had a unique torso that have no central partition to allow this tube to go throught body.
So, i think, that unique torso can be stacked unlimitedly on each other.
I have that minifigure, it's Mrs. Marvel. I'm pretty sure her torso won't stack like that though, she still has the spots for her legs.
That Sheriff....
F R IEND I I N S I DE M E.
You could put a lego Ninjago sword on his head instead of the hat
So interesting seeing the very first version of your tallest mini fig.
Add some leg and shoulder accessories to make it another plate taller
add Ki-Adi Mundi's head piece!
Mr. E from ninjago actually have another torso, but has the plate on the front, so you can have a tripple torso
You just made the most cursed Disney villain ever lmaooo
Add the star wars pauldron and waist cape. Should add about a plate of height altogether
“How tall are you?”
“6 bricks and 2 slabs”
Keep on adding Karen’s torsos on to him
Add skates, a Batman belt, a ninjago mask with a backpack of any kind, one of those weird super tall heads, same legs, and hat, but then a different garmadon body with taller proportions
Those oxygen tanks from the old astronauts would add a bit of height
Dr. Robotnik also uses those really long legs and his torso is giant but unfortunately, his head is not removable
Use the really old Lego torsos that you can stack
Try adding Marge’s Head and Eggmans Torso
Ice skates, Batman utility belt, Minecraft elytra
Add swim flippers
1. Stack the forwards facing garmadon second torso so it doesnt overlap with the backwards facing one from the office worker torso
2. Add marges head instead.
You can Add marge simsons head , a villagers body or you can add the giraffe guys hat piece
I once stacked a bunch of Steve legs on my joker minifig to make a cursed leg demon
Add the Lord business legs from lego movie😂
The birth of Sid from Toy Story.
I’m pretty sure there are roller skates you can put on his feet to make him taller
President business legs from lego movie XD
From one of the old halloween CMF series, there was a mad scientist with a massive forehead headpiece with a stud on top, which is the same as a regular mini figure stud, meaning it can wear a hat, or, go on forever by continuously adding more mad scientist foreheads, creating an infinitely large lego forehead that stretches to the heavens and back.
The Baron Vladimir Harkonenn minifig from the Dune Atreides Ornithopter absolutely dwarfs this
Add Marge’s head from the Simpsons, add a tail piece, add a cape, add a neck attatchment.
A long skirt piece might be taller than Woody's legs?
I mean, you could squeeze in a bit more with a sword holder on the back.
Marges hair instead of pirate hat?
OG Garmadon extended torso on top of the current garmadon
Event taller, Pong Krell is a Star Wars minifig who’s extra torso and head are feused together, you can put this on top of the other extra torso
Yeah but his head connected to the top torso means that I can't put a super tall head like Marge on it
There’s a few Lego hidden side pieces that make it taller like the piece that splits into two heads and the one that turns the torso sideways
Put woody’s head on top of the avatar head
Putting something like the ninjas shoulder pads and a Batman utility belt would also contribute to height.
Add a waist accessory and neck accessory
You could always put it in the Lego stretcher to make it longer
Add one of the weapon holsters from the old ninjago sets
Any sort of backpack/neck piece would probably add just a bit more height
You should use the mad scientest head top from the halloween figure series, it’s pretty and also has a stud on top
you can use the legs from lord business's business suit
I like how Garmondon’s torso matches Woody’s legs.
Someone mentioned a Batman utility belt, you could also give him a backpack for another little height boost
Garmadon looks like Jeffery Dahmer as a mutant
Capes, shoulder armor, utility belts, roller skates 😂
add a utility belt and shoulder pads give him a slight heighth advantage
Flippers, a neck accessory like a scuba diving one, a belt like from Batman/clutch powers, and a taller top hat
You can use multiple Garmadon pieces. You can also stack up minifig heads on top of each other.
Mad scientist from the Halloween CMF series has a double tall hatpiece to look like a giant brain with a stud on top.
You don't even know you've almost created Six-Shooter from Puppet Master
There is that one lego mini fig from the Halloween series that has a enlarged forhead "wig" with a stud on top
Garmadon isn’t appreciated enough, his design is so simple but awesome.
Woody head but with the top hat thing
How tall are you
Lego enthusiast: 31 bricks and 5 plates.
Ngl that Avatar Lego looks like Star Wars. Cool asf btw
you could add the top torso of the Lego stone warrior From the Lego Ninjago prison set to make it taller, all you have to do is put the gray part on top of body and you have three torsos and then you just put on the head on that.
Add a neck and torso accessory
I think some ninjago sets have shoulder gaurds, maybe that would make it 1/3 centimeter taller
two neck brackets with single studs, each one facing forwards and backwards respectively, and a utility belt