🤖 DIY Autonomous Mobile Robot Series - Part 8: Designing with Fusion 360 | Positioning components

🤖 Welcome back to Part 8 of our DIY Autonomous Mobile Robot building series!
Missed any of Parts 1 through 7? Check the links below or access the full playlist at the end of this video.
In Part 8, we'll insert and arrange some components (the caster wheel, the battery holder and one of the servos) to ensure they don't interfere with each other or the body shell. The components mentioned in this video can be downloaded for free from GrabCad via the links below.
Here are the Fusion 360 techniques mentioned in this video:
Move/Copy Tool
Combine Tool
Section Analysis
Insert 3D Model
Align Tool
Joint Tool
Create Sketch
Project Geometry (P Key)
Extrude Command
Fillet Tool
These methods will help you effectively design and optimize your DIY autonomous mobile robot in Fusion 360.
👍 Don’t forget to Like, Subscribe, and Stay Updated!
🔧 Tools & Resources:
- Fusion 360: [Download Here](www.autodesk.c...)
Caster Wheel 3D Model: [GrabCad Link](grabcad.com/li...)
Battery Holder: [GrabCad Link](grabcad.com/li...)
Hi-tec HS 311 Servo: [GrabCad Link](grabcad.com/li...)
Servo Grommet: [GrabCad Link](grabcad.com/li...)
Actual components shown in the 3D model:
*As an Amazon Associate, "Let There Be Engineering" earns from qualifying purchases*
1.2 Inch (30mm) plastic caster wheel, M6 thread: amzn.to/3Lo3pGc
Enclosed battery holder with switch, for storing/connecting 4 AA batteries: amzn.to/4cDmksq
HiTec HS 311 servo: amzn.to/4cQbSO8
See you in the next video! 🚀
🔗 Part 1: • 🤖 DIY Autonomous Mobil...
🔗 Part 2: • 🤖 DIY Autonomous Mobil...
🔗 Part 3: • 🤖 DIY Autonomous Mobil...
🔗 Part 4: • 🤖 DIY Autonomous Mobil...
🔗 Part 5: • 🤖 DIY Autonomous Mobil...
🔗 Part 6: • 🤖 DIY Autonomous Mobil...
🔗 Part 7: • 🤖 DIY Autonomous Mobil...
🤖🔜 Next Video: Part 9 - coming soon!