💪New Refrigerator Won't Fit?
HTML-код
- Опубликовано: 8 сен 2024
- When you have a refrigerator or ay appliance that is too tight or too large for a space you have a real problem. I show you how to make it fit yourself and give you the extra room you need to save the day.
Check me out on Instagram for great photos and more project updates
/ silvercymbal
Disclaimer:
Due to factors beyond the control of Silver Cymbal, I cannot guarantee against improper use or unauthorized modifications of this information. Silver Cymbal assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Silver Cymbal recommends safe practices when working on machines and or with tools seen or implied in this video. Due to factors beyond the control of Silver Cymbal, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Silver Cymbal.
Oscillating multi-tool works great too. Just used one to cut an extra 1/4" off the bottom ledge of my cupboards for my new fridge.
I know this is an old post but what oscillating multi-tool blade did you use to cut the bottom of your cabinet? Thanks in advance
My husband and I look and buy tools all the time. This is new to me and I need my cabinet trim cut for my new refrigerator...Nice of you to share!!!
Thank you very much
I'm having this exact problem. Thank you so much
THANK YOU! My NEW refrigerator fit's, the problem is I can not open the left door completely. Because the door rubs against the wall and can't be opened all of the way. I need an INCH! This video gives me HOPE :)
Glad it helped
That shark and crunching sound cracked me up.
Me Too‼️😂😂
Can use the planer for the side panel. To take off 1/8 or 1/4”
EXACTLY what the Dr prescribed! Thank you!!! Appreciate your time good sir
Thank you. Very helpful.
Hi! thanks for the vid I have the same problem as was wondering if its safe to do this to the countertops? thanks
What a gentleman
Haha. Just had to do the same at a rental property I just moved into. Pretty sure my deposit is gone but what choice do I have
The SHARK!!!!😂
Looks like we will see a review of the Hoover ground command shop vac next. Use a rug vacuum to pick up wood. 😪
When you are in the land of mother in laws you have to use the tools at hand. No Festools on this job.
That is my exact problem.
This helped so much. Thank you 🙏🏽
“He loves his mamma!” (In law) 🤣
Big time brownie points there Cymbal! 👍🏼
He he he, more like SCARED of her! 😬
I think I'd go with my belt sander rather than buy another tool...
Could be more messy, but I believe it would get the job done
Tried a belt sander because I had one , but it was very long and tedious and not so neat. This tool does a cleaner job more quickly.
Ya I'm getting this tool, makes a cleaner finish they're pretty cheap
Also if you're looking to buy a new fridge, stay away from 1.Samsung and 2. Any of these new style french doors with the ice maker in the fridge
Too late for me.
@Gaming, what do you mean "ice maker in the fridge"? Thank you!
Why?
Is there any reason why this couldn't be done with a manual plane, if you're confident in using it? I suspect it would take aaaages though! You're tempting me to buy new gadgets!
good thing all appliances are owned by the same 3 companies now and are all the same
Hi my partner is saying that we're her fridge freezer is coming to 23in and what if the new one is 40in, is there a way to make it fit, without doing a botched job
But how do you plane the bottom couple of inches? Sideways?
Immediately was wondering the samething
Thanks
Did you plane the side of the counter top too? Or does something different need to be done for that?
Would like to know that too. Got a great deal on Black Friday and I need a 1/2 inch.
I suppose you could try a hand grinder fitted with a 40 grit flap disc, but it would create a lot of dust.
The planer seems the way to go. Nicely done.
Mine was already complaining about the shavings, she would haver thrown me out with that much dust! 😉
How much did you trim off in total?
Fucken knew I had to do this shit lol 😵😅😂
Hi, great suggestion but in my case i have cabknets in both sides and cannot shave it as it is finished witb lacquer! Two big slabs as cabinets sticknout. What to d?
Can’t do this with quartz or granite countertops unfortunately.
Can this be use wit a marble countertop
Only for the wood cabinet. It is possible to shave marble, or grind it down but it is too much for a homeowner to do on their own.
I just need to drink it a bit because my fridge doesn’t wanna go in only goes in half way
Doesn’t the planer have a dust bag attachment
It may have but I bought this one used and didn't get that
Will this tool work on a wall. My French door on the left hits the wall and doesn’t open all the way.
Will this work on laminate countertops????
no heating problems? You don't seem to have much clearance above the top.
Planning on getting one of theses because of the video? If I do, what setting should I start at?
Use a smaller setting than what you're removing. I'm about to remove 3/16 of a cabinet to slide in a new oven. Like the video said, multiple short passes. You can always take more off, but it's impossible to put a little extra back on. ;)
We need to do this, but the actual; countertops need to be sanded down too... will this machine work to sand down the sides of our countertops? they are made out of some cheap plastic like material.
This will destroy plastic. How much more space do you need? If it's only a little bit, a sander will work, you just have to make sure you don't get too aggressive with it otherwise it could melt the plastic.
To bad I can't do this in my apartment
Ok, but what about of the frig is too deep? How can we create more depth? Or is it even possible?
Only trick I know for that one is if you have a baseboard at the bottopm, to remove it and that can gain you 1/2 to 3/4"
PLEASE TELL ME WHAT THIS TOOL IS CALLED
Makita power planer
Would this work on a wall? Im not sure if it's the door frame or the wall, but my new fridge wont fit thru, just need half an inch more of space to go thru into the kitchen! Any ideas would help!!
What was your solution? I am having the same problem with my fridge.
@@JumpddwithusNeed to remove the doors. Thats how the pros did it with my install.
Will it cut Quartz ?
No sorry
We use a multi tool
My planer starts running into staples and sparking...
My home is a rental so this won’t work :(
This will probably overheat your fridge...
Should measure the correct size and buy one can fit there rather than trimming the cabinet