Rearden Atlas and Atlas XL
HTML-код
- Опубликовано: 5 фев 2025
- Reardenmfg.com Welcome! This video we discuss some past content for context followed by what I think is a great mount option and the how, why and specs - The Rearden Atlas mount- in its short/normal and XL versions and what muzzle devices are compatible and and the dimensions around that info. Video for educational and entertainment purposes only. Use at your own risk. Patreon.com/silencerstudent
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
The best vid for a beginner like me. I was so confused trying to find a muzzle device to use with my new can!
Videos like this are a godsend to the 2a community
thanks man
Getting my can tomorrow and is going to be using Rearden, thank you!
This was SO helpful; learning all this for a first-time build is daunting! Thanks for breaking it down so well!
Absolutely PHENOMENAL video man ! Thanks for this one. Now I know exactly what I want to order for my new Ventum 762. Thanks
Great info thank you! Just bought a Witt Machine Mod-1 suppressor and they ship with the Atlas and 1 brake. Going to have to get a few of the others you've referenced here for some of the other hosts I have!
Right on
I just started watching your videos. Thanks for the great information. Edited: I didn't completely finish the video. Now finished
the color is just chef's kiss
Years ago when I built my 300 BLK I put an AAC 51T Brakeout on it as I wasn't ready to put myself an an NFA list. Now that I'm ready, AAC 51T is obsolete! Dang! Thanks for some great info.
Just put two Otter Creek Lab cans in jail. I've been looking at OD mount and was leaning towards Deadair Keymo, Keymicro, and xeno. This just changes my mind and will look into Rearden. Great info on all OD mounts.
Good choice!
Quick question: which would you recommend? Atlas xl and dual brake(brake to 1st baffle 1/2") or XL with SP comp(1" to 1st baffle)?
I’m wondering the same thing!
8:20 Rearden Muzzle devices
11:40 Rearden Mounts (Atlas & Atlas XL)
23:25 Rearden Atlas & Atlas XL uses
Well done!
Otter creek labs polonium K with a rearden DPB would I need an ATLAS or ATLAS XL?
atlas is fine
Reardon site says the DP is supposed to be used with the XL.
Thank you for making this video. I have a ADM 13.9 mod 1 pnw. I would like a k can, but I want to stay legal with a pnw muzzle device. Any suggestions that would give me some good options?
@@bernardcaillouet5565 i think they have one muzzle device that can do it as does i believe liberty precision machine. Its hard to make a muzzle device that long and keep it effective, but the atlas xl will help with that as it keeps it from getting too close to blast baffle in those situations
Thank you.
It's kinda disappointint that it's been over two years and there hasn't been more options on the market (except for FCD)
Does the original plan b fit the rearden muzzle devices or do you have to use atlas
@@nco6835 yes a q muzzle device can go into an atlas and a rearden muzzle device can go into a plan b, however atlas uses an improved design with secondary points of contact so i would use new items or used unless u understand that second point of contact if planning on using any q stuff. Rearden makes better product any
@ thank you
Thanks so much for this video! I'm looking to go with this mounting system for a future can. It seems like you were saying that the breaks give you the best sound suppression. I would have always though a break would be louder in a can than a flash hider in a can. Is it really quieter with a good brake? I usually like to run flash hiders so if I don't have a can on its not as obnoxiously loud and it mitigates flash. What are your thoughts on the performance of Rearden's FHD vs R2S flash hiders? Thanks!
it just depends on the muzzle device. luckily rearden has been the best bet i have ever found. flash hiders in cans can wear out your blast baffle pretty brutally
What Rearden QD do you recommend for a YHM R 9 ?
i believe the r9 is 1.375x24 so regular atlas
Do you have a video with how to clock the brake with shims?
no this is actually the first time someone has asked me this i could probably do a "short"
Great info! do you by chance know how far the liberty eclipse FH sticks past when threaded in? want to add an atlas to my hybrid and I have 1.65" of clearance. trying to decide regular or xl atlas. thanks!
Shouldnt be more then .9-.95
Solid info. Any idea how well the rearden double port brake actually mitigates recoil? Thinking of putting it on a 7prc. I’d like to be able to spot impacts with just the brake on and have the option for the supressor for certain shots.
😂😂 that’s funny because I’m here for the same thing, I do already have two of the double ports, but they are on 22 cal guns
notice the shape of the ports. the gas spirals out in , u quicly get more complete combustion
Does swapping out an ASR bravo mount to an atlas (aside from size and weight improvements) do anything for back pressure. Less, more, or indifferent backpressure?
the muzzle device you choose can. im not a huge fan of asr stuff . blast chamber size and clip size and spacing going to play a larger part.
Looking at the rearden muzzle. What’s the difference between the SPB and RPB? In terms of functionality
rpb will act sort of like a tiny suppressor when its inside a can. its also going to tumble gas that exists its side ports. its also just aestically different way to do a traditional single port
@@silencerstudent9381 thanks. I ordered R2S to go with atlas mount for a polonium k. :-)
@@silencerstudent9381does the tumbling of gasses make the RPB superior to the SPB?
@@TheMusclesMarinara I hope the presenter answers this question.
I've got a 12.5 aero upper with a 12.7 handguard. The inner diameter is 1.2 . When I measured from where the barrel threads start to the end of the hanguad is 7/8. Would the XL Atlas sit down inside the handguard enough to run a lahar 30 ?
Very informative, thank you sir🙏🏼
Glad it was helpful!
Between the Atlas and the Plan B, the Plan B had deeper/longer sidewalls into the suppressor. So wouldn't the Plan B bet better than the Atlas?
Do you know if the Rearden XL is usable with silencer co breaks ?
Does the atlas xl fit the Helios qd?
Would the double port brake with regular atlas on the Nomad L? Debating this or the Xeno
the nomad has a small bc but i believe it still fits just close to first baffle
Any recommendation on a mount for precision rifle with Diligent defense enticer S? 6.5cm, dedicated suppressor but will be removed each time to fit in range bag lol. Can't decide if direct thread or taper qd mount would be better. And which rearden or LPM brakes best?
I know this is an old video but just found it. How does the fpm break function with the atlas? I read some negative stuff about it and this seems to be the only video that really talks about the fpm stuff. Thanks.
not a fan of the quality
Just got my Polonium out of jail and have the Atlas XL with Q cherry bomb on my 5.56 rifles. Ive noticed before ive even shot that if i crank down on the hand tight to the muzzle device, the QD will stay on when i unscrew the can. Suggestions???
@@320epdmk u shouldnt be cranking down on that joint. Its like over tightening the lig nuts on your car. The threads stretching puting more force on the taper requiring a multiplication of effort to get it back off. Finger tight is all it takes to properly tighten an atlas. That said rockset or locktight the mount to the can should insure the mount never backs off during normal use cases
Ive been watching your vids for weeks straight ive burnt myself out trying to figure out how to form1 the perfect build..help me lol. I want to do a 1.625 30 cal. I need mounting solution so I can run it on my 556 as well. I see some sites I was looking at I think have been compromised.
Its all on patreon.com/silencerstudent the youtube is just a place to help get folks started
Can you recommend some muzzle devices(brakes/flash hiders/hybrid) that I can have pinned and welded on a 14.5” AR and is compatible with the Liberty Precision Torch and the Otter Creek Labs Polonium?
Rearden R2 flash hider adds 1.605" to barrel for P&W.
R2 overrun on regular Atlas is 1.561".
OCL Polonium is about 1.6" to first baffle.
LPM Torch 2.25" to first baffle.
Does Rearden make an atlas xl In titanium?
I'm looking at the rearden stuff, currently running the sdta qd stuff and wanna get away from it. I have one rifle with the sig taper but other 30cal rifles with square shoulder, do I just buy the taper mounts and use them on my square shoulders? Looking at the mini (ht) and there's no option for 5/8 with square shoulder
all the muzzle devices are square shoulder unless otherwise noted . the atlas is the mount that attached to the tube- generally most suppressor have the universal hub asr bravo 1.375x24 thread. then the muzzle device threads into the mount when you decide to attach the suppressor
Have you used the Liberty Flash hider? Comparable performance to Rearden fhd?
used them both but havent directly compared flash at the same time on both- if more worried about flash over sound then potentially the liberty in my opinion
Two things, have you seen anything on Torrent suppressors muzzle devices and QD system and can you do a video on link to McMaster Carr part numbers for alignment rods?
If I get a Rearden DPB, do you think it will be best to get an Atlas or Atlas XL. I currently have a LPM Anthem S as my can.
ATLAS
I using sdta quick adapter with their flash hider (form1 30cal can), but it's came loose after couple shots. Do you know what I can do to stop it from coming loose?
its basically junk and is going to always do that unfortunatly
What are your thoughts on the new YHM SRX? seems like a similar design, and I'm debating whether to go SRX or Atlas for my Turbo t2
i havent gotten to cut one apart yet so im holding out a yay or nay but i just dont think anyone makes or will make a product as accurate as darren does.
Do you perform the boring out of the asymmetrical brake from Dino precision? Or is it just drilling it from the rear?
u can just drill or email saucyjoestech@gmail.com or have someone else handle it
What muzzle device would you recommend best for sound suppression, the rearden single port brake (SPB) as you mentioned it's your favorite?
its one of two favorites from them . its a good choice
@@silencerstudent9381 thanks for the reply! Have you noticed a difference in sound between the FHD vs SPB (can on obviously)?
Had any issue with the ht galling like dead air claims?
@@timb7397 keeping the taper clean (wipe it off with the end of of ur shirt or a rag periodically when u remove the can) helps make sure u always get a proper seal. U can also run a small thin layer of antisieze on the taper as good habit say every time u clean the rifle also do that.
Are the rearden mounts left hand thread like the dead air Xeno?
they are not but left hand threads arent really needed with them as with the different surface finishes and additional shielding getting carbon locked can only happen with incorrect use - ie. left it loose.
24:18 Sorry if I missed it, but what tube is that?
Does JK still do Form 1 builds?
Which rearden muzzle device do you prefer? Dpb, rpb, or sbp? I’ll be using it with the regular atlas in a Rex silentium mg7. Any insight on which is the best one is appreciated, thanks!
Im running rpb on most my stuff and some r2 and r2s’s
@@silencerstudent9381 r2s should fit right? Looks to be similar in size as the rpb and spb
@@Manhatn15 the s is same length as the rpb basically
Debating a rearden xl or a dead air xeno on my A-10 warthog 5.56 can
2 years later, most are still out of stock.
@@ICanDoItMyself they sell that many. U can find them anywhere
I baught the liberty anthem-s QD, it's not a QD, it's a threaded mount. You literally have to screw on and off the "qd" portion.
qd currently means: has asr/bravo/hub/1.375x24 threads to accept mounts. non qd means direct thread only , and then you have dedicated qd which is some company usually locking you into their crappy system like surefire for example. bad qd system but good muzzle devices unsuppressed
@@silencerstudent9381 yeah I went back and forth about it with ~experts~ at a gun store. QD stands for quick detach I thaught, not faster unscrew. It's BS.
shit i guess i shouldn't have gotten the keymo :(
I'd argue that the options for keymo compatible muzzle devices means you're still in the clear, especially if you ever take your suppressor off your gun.
Is there a booster for pistols that works with plan b or rearden?
@@haydenjordan8441 any booster on the market in asr b threads (hub thread) (aka- 1.375x24) try yhm, eccomachine, sico, resilient suppressors has a nice new one