MK7.5 GTI aerofabb® V2 Front Splitter Install (and kind of a grill video)

Поделиться
HTML-код
  • Опубликовано: 20 окт 2024

Комментарии • 42

  • @Vaguh
    @Vaguh  3 года назад

    If nothing else, I hope you learn a lot about how the grill and bumper are attached on the MK7.5 GTI. I sure didn't expect it to have THAT many tabs.

    • @pederfree1251
      @pederfree1251 3 года назад

      Doesn’t the acc needs to be recalibraited when it has been disconnected?? 😬😳

    • @Vaguh
      @Vaguh  3 года назад

      @@pederfree1251 I don’t believe so. If it needed to be recalibrated after being removed and reinstalled in the same exact position, I would be really concerned. It’s adaptive isn’t it?

    • @pederfree1251
      @pederfree1251 3 года назад

      @@Vaguh ‘the adaptive cruise control system calibration is necessary when:’
      motointegrator.com/si/en/services/487-adaptive-cruise-control-system-acc-calibration

    • @Vaguh
      @Vaguh  3 года назад +2

      @@pederfree1251 Fingers crossed then! Haven’t had any issues on the 3 VAGs that we’ve removed the front bumper and have ACC. Do you have experience with some issues being caused by not recalibrating that you can share?

    • @pederfree1251
      @pederfree1251 3 года назад +1

      @@Vaguh no i didn’t commented to teach you anything, just curious...and good to know you have real life experience with 3 cars, that didn’t created problems with the acc...

  • @ilimit
    @ilimit 3 года назад +2

    Love that color on the rabbit. It's cool how your friends are so close and all have dope cars. Cool tree btw 👍

    • @Vaguh
      @Vaguh  3 года назад

      Thanks, bud! I really love the Urano Grey and the color scheme he has going. The tree is always awesome, but is also a bit extra for a couple of weeks in the fall.

  • @korykojima9468
    @korykojima9468 3 года назад +1

    Good work on the video and thanks for being so detailed about the process. The chapter breakdown was very helpful too. Shout out fellow PNW hopefully I see you on the streets out here.

    • @Vaguh
      @Vaguh  3 года назад

      Thanks! We hate when people post “install” vids and you only get half of the work (usually only the easy parts). PNW for life!

  • @Beardchanics
    @Beardchanics 3 года назад +1

    Nice looking front spitter and love those red leaves on your drive

    • @Vaguh
      @Vaguh  3 года назад

      Thanks guys! The splitter is solid, but the leaves are a beautiful mess.

  • @jmeatk
    @jmeatk 3 года назад +1

    That af front splitter is awesome af!

    • @Vaguh
      @Vaguh  3 года назад +1

      You’re awesome AF!

  • @DadWagon
    @DadWagon 3 года назад +1

    0:20 - Adam realized he needs a wagon :P

    • @Vaguh
      @Vaguh  3 года назад

      Wagon is goal!

  • @LukeNguyen112
    @LukeNguyen112 3 года назад +1

    Man I miss my Mk7.

    • @Vaguh
      @Vaguh  3 года назад

      Glad we can keep your glass filled with MK7 content.

  • @blueprintstech5638
    @blueprintstech5638 2 года назад +1

    is the gti lowered? and on springs or coilovers if so

    • @Vaguh
      @Vaguh  2 года назад

      Yep, he is on KW coil overs. If you’re on IG, check him out. instagram.com/r4b1d_r4bb1t

  • @benjo0325
    @benjo0325 3 года назад +1

    How is the aerodynamics of the front lip? Because my front lip from maxton design cracked at 220kmh.

    • @Vaguh
      @Vaguh  3 года назад +1

      I don't have personal experience going that fast with it, but I've read many others who have this lip and report 130+ MPH (210+ KMH) on the track without issues. Plus the fact that aerofabb includes their aerobrace makes it even harder for this thing to come apart at speed. If anything, your whole bumper may come off with it, haha.

  • @benjamindippo
    @benjamindippo 11 месяцев назад +1

    Where’d you get those badges?

    • @Vaguh
      @Vaguh  11 месяцев назад

      The grill and other badges were purchased at badgeskins.com/. They are the best!

  • @sacramemtodiazjr2671
    @sacramemtodiazjr2671 7 месяцев назад

    Does the bumper have to be removed?

    • @Vaguh
      @Vaguh  7 месяцев назад

      Hey, there are some older videos of people attempting to do this without removing the bumper and I seem to recall them all hating themselves for attempting it that way. We really struggled with the grill here, but overall removing the bumper isn't too hard. Good luck if you try it with the bumper on!

  • @mohammadbalakim5371
    @mohammadbalakim5371 3 года назад +1

    How to order bumper and spoiler aerofabb

    • @Vaguh
      @Vaguh  3 года назад

      You can order through their web site. www.aerofabb.com/

  • @thedarkgreenvanman
    @thedarkgreenvanman 2 года назад

    How much does the lip stick out?

    • @Vaguh
      @Vaguh  11 месяцев назад

      Hey, sorry we missed this! I'd say it stick out about 1.5" to 2".

  • @blueprintstech5638
    @blueprintstech5638 2 года назад

    What camera do you use

    • @Vaguh
      @Vaguh  2 года назад +1

      The easiest one possible…. iPhone 11 Pro.

  • @DatGameCollector
    @DatGameCollector 3 года назад +1

    What is he lowered on?

    • @Vaguh
      @Vaguh  3 года назад

      KW V1 coilovers.

    • @DatGameCollector
      @DatGameCollector 3 года назад

      @@Vaguh is it lower fully? I have a cornflower blue rabbit. His fitment is exactly what I want.

    • @Vaguh
      @Vaguh  3 года назад

      Nope, it could be lower. He also has the wheel spacer kit from Deutsche Auto Parts.

    • @DatGameCollector
      @DatGameCollector 3 года назад +1

      @@Vaguh yea I've got the flush kit from ecs basically the exact same thing. I may have to get the kw v1. I was thinking those or bilstein. Did you do the install? I'm guessing thats like a 6 or 8 hour job right? I've never done it before.

    • @Vaguh
      @Vaguh  3 года назад

      @@DatGameCollector He had a local shop do the install, but what you said sounds about right.