@@josephshenette812 I've searched my receipts and can't seem to find exactly where I bought them. But, I'm thinking I got the 2 1/2" flow tubes from LMR.com. They simply slip fit over the muffler, and bolt to the H-pipe. I also bought the stainless tail pipes from LMR, which also slip fit over the mufflers. I'm thinking I bought the 40 series mufflers from summitracing, simply because they were cheaper there at the time. The rear hangers are built into the tailpipes. The ones that are right behind the mufflers, if memory serves, I used the stock hangers and modified them by welding a washer onto the end and just used the muffler clamp as a bolt to point. Thanks for watching!
My car still had the 28 year-old factory exhaust when I bought it. There were lots of holes in the system and at least one parts store flexible pipe installed. It sounded pretty good. A lot of drone. Couldn't carry in a conversation in 5th gear at highway speeds. Also, a lot of drone. Fast forward. Installed 1.75" long tube headers, o/r h pipe, and dumped 3" Flowmasters - 3" system from headers back. The car is relatively quiet at idle. Volume increases dramatically with any throttle. Believe it or not, it's a lot quieter in 5th at highway speeds. Me and my daughter can talk without yelling at each other. Only drone I can think of is around 1700 rpm in 5th. A slight increase in rpm and it disappears. I was really concerned that drone would be worse with the Flowmasters. Anyone with a Fox should have Flowmasters. Ford should have installed them from the factory! Thank you for the video. You still have the best sounding 5.8 I've heard.
Thank you! The drone is pretty unbearable at this point. I'm looking for a solution and thanks for sharing your experience!! I was actually thinking about the flowmaster 50 series delta flow. They claim it should greatly reduce the drone and give a performance boost. But then again all aftermarket parts, even nuts and bolts come with performance claims 🤣😂🤣😂. Thanks again!
I have to replace my bolts they connect from H pip to the muffler because two of them are stripped I’m gonna use a impact gun does that matter at what setting I should have tfe impact?
The American force system comes with super 44 mufflers. Sounds good
Thanks! I bought this system in separate pieces so I could get the old style 40 series mufflers. 👍
@@ThisOldFarmShop What did you use for muffler inlet pipes and muffler hangers?
@@josephshenette812 I've searched my receipts and can't seem to find exactly where I bought them. But, I'm thinking I got the 2 1/2" flow tubes from LMR.com. They simply slip fit over the muffler, and bolt to the H-pipe. I also bought the stainless tail pipes from LMR, which also slip fit over the mufflers. I'm thinking I bought the 40 series mufflers from summitracing, simply because they were cheaper there at the time. The rear hangers are built into the tailpipes. The ones that are right behind the mufflers, if memory serves, I used the stock hangers and modified them by welding a washer onto the end and just used the muffler clamp as a bolt to point. Thanks for watching!
@@ThisOldFarmShop Just re-watched. I see what you did now. Smart idea, thanks.
Sweet lift and sweet shop! Stang Gang!
Thanks much!!
My car still had the 28 year-old factory exhaust when I bought it. There were lots of holes in the system and at least one parts store flexible pipe installed. It sounded pretty good. A lot of drone. Couldn't carry in a conversation in 5th gear at highway speeds. Also, a lot of drone.
Fast forward. Installed 1.75" long tube headers, o/r h pipe, and dumped 3" Flowmasters - 3" system from headers back. The car is relatively quiet at idle. Volume increases dramatically with any throttle. Believe it or not, it's a lot quieter in 5th at highway speeds. Me and my daughter can talk without yelling at each other. Only drone I can think of is around 1700 rpm in 5th. A slight increase in rpm and it disappears. I was really concerned that drone would be worse with the Flowmasters. Anyone with a Fox should have Flowmasters. Ford should have installed them from the factory!
Thank you for the video. You still have the best sounding 5.8 I've heard.
Thank you! The drone is pretty unbearable at this point. I'm looking for a solution and thanks for sharing your experience!! I was actually thinking about the flowmaster 50 series delta flow. They claim it should greatly reduce the drone and give a performance boost. But then again all aftermarket parts, even nuts and bolts come with performance claims 🤣😂🤣😂. Thanks again!
What’s done to get 400 horse out of the 351?
HCI combo. Got it tore down upgrading right now.
I have to replace my bolts they connect from H pip to the muffler because two of them are stripped I’m gonna use a impact gun does that matter at what setting I should have tfe impact?
Use as much as you need to break them loose. You might wet them good with some penetrating oil.