I got my Jumper T16 Pro and watched your vids several times and i gotta say i would not of got the Telementry and maps working without your guidance and videos i put this on all 9 of my Drones and for my Nimbus Vtol too Thanks . B.K
I have question all working good**** BUT*** on my telemetry page I have disarmed and red no GPS flashing and the rest GPS will not go away even know it shows I have GPS and all telemetry is working..thanks ahead ur videos helped me great job
Unfortunately this script does not work on the radiomaster T16s. I have a full version of tbs, the data goes via mavlink, but the script is silent, it only shows the coordinates.
I have this problem too. I wrote a Issue on his Github site and keep you posted. But if you let it discover Sensors under Model->Telemetry->Discover new Sensor you can display your battery voltage in a value widget. I got also the Groundspeed Altitude and the Altitude difference between the startpoint (GAlt) working this way. This way you have at least the most important things on the radio.
Using the rfd txmod on my horus x10s and installed the txmod and yaapu to it but it keep beeping with failsafe on the rc display. Been using QGC as GCS but no failsafe coming out from it. Any idea?
I’m not sure what I’m doing wrong. I can’t get yaapu script to display the telemetry data. TX16S, Crossfire Micro TX Module, Crossfire Nano RX to F405 Wing FC via SBUS with mavlink rx and tx on Serial1. “Discover new sensors” in OpenTX sees the sensors from F405 and I get real-time data, just no activity in the Yaapu script.
I got a question.... You said you're using Mission Planner with the Pixhawk Flight Controller.... What Firmware from Mission Planner did you download to update the Firmware on the Pixhawk...? I have a Holybro Pixhawk 4 FMUv5 and all Mission Planner offers is "Arducopter" (autopilot)...I tried to use QGroundControl but it's got like 844 Issues according to Github and it's not worth a pound of sand...! I'd like to run Pixhawk Firmware on Pixhawk 4 Flight Controller, not Arducopter...! Thanks in Advance....! =)
Great tutorial. Do you know if this yaapu widget will read the telemtry that is provided by a Crossfire connection to the quad? CSFR does support sending telmetry to the radio. Just unsure if the yappu script will also read these values.
Hi .I'm using a tx16s and can't get the script working. Last open tx. I followed your tutorial and yaapuu installation guide without success . the happy widget doesn't appear on the widget selection screen. Maybe someone can help me.
Hello Sir: Now i've been having a big problem, i can no longer get a GPS on the J T16 Pro, i've tried discover sensors at least 20 times after i waited on seeing it on MP that i had HDOP 0.8,gps grid cord and 14-16 sats i even tried adding a new sensor and rediscover then waited nothing happens i tried changing Pixhawks 2.4.8 tried 3 different new compass/GPS tried reinstalling yaapu scripts,sounds,widgets and nothing seems to work oh and i've changed telem ports on the pixhaws and changed serial protocol to 10 and i still get nothing and i just don't get it it worked great before so would you have any suggestions ? Thanks B.K
I have a question,after i set this up on my Tarot large Quad and everythings working great my ? is do i have to do this on all of my models. Thanks B.K
@@hometimesuccess Really appreciate that!! I would love to have them send me one. Im not sure I'm big enough yet but I will try and reach out and see what they say.
Thank You! From Frisco, TX
I got my Jumper T16 Pro and watched your vids several times and i gotta say i would not of got the Telementry and maps working without your guidance and videos i put this on all 9 of my Drones and for my Nimbus Vtol too Thanks . B.K
I’m glad the videos helped!!
Very nice features, it work on my Radiomaster Tx16s !!
Thanks for this BFH! Got telemetry working. Now to download some maps!
I have question all working good****
BUT*** on my telemetry page I have disarmed and red no GPS flashing and the rest GPS will not go away even know it shows I have GPS and all telemetry is working..thanks ahead ur videos helped me great job
This does work awesome. I have full telemetry display on my Jumper T 16.
Unfortunately this script does not work on the radiomaster T16s. I have a full version of tbs, the data goes via mavlink, but the script is silent, it only shows the coordinates.
I have this problem too.
I wrote a Issue on his Github site and keep you posted.
But if you let it discover Sensors under Model->Telemetry->Discover new Sensor you can display your battery voltage in a value widget.
I got also the Groundspeed Altitude and the Altitude difference between the startpoint (GAlt) working this way.
This way you have at least the most important things on the radio.
@@alextschumper9020 Thank you very much for the information!
Using the rfd txmod on my horus x10s and installed the txmod and yaapu to it but it keep beeping with failsafe on the rc display. Been using QGC as GCS but no failsafe coming out from it. Any idea?
I’m not sure what I’m doing wrong. I can’t get yaapu script to display the telemetry data.
TX16S, Crossfire Micro TX Module, Crossfire Nano RX to F405 Wing FC via SBUS with mavlink rx and tx on Serial1.
“Discover new sensors” in OpenTX sees the sensors from F405 and I get real-time data, just no activity in the Yaapu script.
I got a question.... You said you're using Mission Planner with the Pixhawk Flight Controller.... What Firmware from Mission Planner did you download to update the Firmware on the Pixhawk...? I have a Holybro Pixhawk 4 FMUv5 and all Mission Planner offers is "Arducopter" (autopilot)...I tried to use QGroundControl but it's got like 844 Issues according to Github and it's not worth a pound of sand...! I'd like to run Pixhawk Firmware on Pixhawk 4 Flight Controller, not Arducopter...! Thanks in Advance....! =)
Hello, do I need GPS for the yaapu to work ? Mine yaapu page just blink not update the data, no idea why ? do u have some suggestions ?
Great tutorial. Do you know if this yaapu widget will read the telemtry that is provided by a Crossfire connection to the quad? CSFR does support sending telmetry to the radio. Just unsure if the yappu script will also read these values.
Hi .I'm using a tx16s and can't get the script working. Last open tx. I followed your tutorial and yaapuu installation guide without success . the happy widget doesn't appear on the widget selection screen. Maybe someone can help me.
Are people still using the PixHawk board? Can you make a similar video for inav ?
Pixhawk is still very popular with larger size UAVs I will look into doing one for inav.
Super , sir , excellent , job sir
Hello Sir: Now i've been having a big problem, i can no longer get a GPS on the J T16 Pro, i've tried discover sensors at least 20 times after i waited on seeing it on MP that i had HDOP 0.8,gps grid cord and 14-16 sats i even tried adding a new sensor and rediscover then waited nothing happens i tried changing Pixhawks 2.4.8 tried 3 different new compass/GPS tried reinstalling yaapu scripts,sounds,widgets and nothing seems to work oh and i've changed telem ports on the pixhaws and changed serial protocol to 10 and i still get nothing and i just don't get it it worked great before so would you have any suggestions ? Thanks B.K
Thanks...Very helpful. Liked and subscribed.
Will the R1 receiver from jumper work with this setup?
I have a question,after i set this up on my Tarot large Quad and everythings working great my ? is do i have to do this on all of my models. Thanks B.K
Its ok for Apm 2.8 too ? Tks. My setup is Apm 2.8, Taranis Qx7 , R9m and Slim+ Rx.
Great video men thank u so much.
Is there a delay of telemetry while flying?
good video. thank you for sharing
Good video. I would love to use this script with arducopter. I’m using crossfire. Do you know if this script also works with a crossfire setup?
Yes. Checkout my latest video. Display Telemetry Maps Using any Receiver and Flight Controller. (Yaapu Telemetry)
@@builtfromhome9207 thanx, will give it a try
hey i have jumper R8 reciver which has TXand TX pins can you please tell me how to get telementry working
Im sorry but I have never used that receiver.
ez..
receiver tx to FC rx
receiver rx to FC tx
Naza m lite support telemetry....
set this up with a TBS $119.00 Receiver
Please
Im sorry but I do not own the TBS crossfire. I would like to get one someday though.
Contact them and tell the to send you one to show on you channel. Like your channel more than any of the others
@@hometimesuccess Really appreciate that!! I would love to have them send me one. Im not sure I'm big enough yet but I will try and reach out and see what they say.
"Tarot" is pronounced TAROE not TAROT :-)
Really? Good to know!