@@ahmedbishri you made my day! Back when I made this video new lids were not available. Now you can find them on Amazon. Still, if you can fix it, save some cheddar and keep some plastic out of our bodies.
Brother, you’re awesome. Thank you for making this video. I dropped the top while making margs. The springs and pieces went everywhere. I didn’t even know there were 4 springs until watching your video and then finding the 4th under the fridge. Appreciate you taking the time to record and upload this. You saved the day. Internet high-five. 🤘🏻
Thank you so much!!! I had the exact same problem. Button wouldn't work. Took it apart, discovered I only have two of the screws, not four. Hope it's okay. And one of the springs that pushes the button up is missing. But it seems to be working for now. You just saved me a whole bunch of money! Thanks again. 😊 FYI I'm a 69 year old woman. There is nothing that says I have to be a helpless woman! 😁
I can't believe you were able to find the spring twice! My dropped things disappear forever into the black hole of nothingness!! Even I could have made the repair with your expert instruction. I did get a little nervous when I saw the hammer. I was wondering if we would see smashing if the assembly proved problematic! LOL!
For sure you would have! Smashing is usually ny backup plan. The first smashing was a measured bashing with a rubber mallet to see if I could knock the problem free. When it didn't work I took it apart.
THANK YOU!!!! YOU SAVED ME A TRIP where I bought the blender or $75 that a lock lid cost!!! Thank you!!!!.... great explanation 👌!! For ever thankful 👏 🙏! (Joshua's mom)
Thanks Alkatross! Something was rattling inside of the lid on our Ninja. I wasn't sure about just popping the lid apart; I was concerned that I would break something else. I went ahead, and it came apart easily. The rattle was from one of the L-shaped pins...it had come out and was just rattling around inside of the lid. ...and yes...the inside of the lid was pretty nasty! 😂
Great video! The button wouldn't unlock the lid. Took it apart and the little plastic L piece was broken. I didn't have that glue, but after watching the video and figuring out what does what I realised a credit card slide down inside the handle would release the two locks and the handle pops right open. (the button opens the side that's not broken, but the other side gets out of alignment). So the credit card on that side and I'm good to go. Saved me buying a new lid. Thanks!
Me sirvió demasiado a mí se me cayó la tapadera y se me desarmó toda pero gracias a este video pude armarla otra vez la única diferencia es que mi tapadera no traía tornillos sólo entraba a presión pero muy buen video gracias
Mine is designed similarly but also slightly different. Your lid has the sliding assembly within a case that you screw down. On mine they have eliminated the case and they enclose the beveled pins that have the springs fit through a small opening with a small piece of plastic and the plastic had broken loose so the beveled pins where allowed to move up and down slightly. The problem with my lid is that the locking handle wouldn't lock down and I had to hold it down manually the whole time I would be using the Ninja so that it would come on. So, they have made some minor design changes but they still have not eliminated the problems with the lid.
Brilliant work. I had the exact same problem and glued an appropriate sized lego where you glued the plastic piece. Working great now. Thank you for the video!
Unfortunately that seems to be a weakness on these lids for years. You would think the manufactures of Ninja would come up with an engineering fix because this has been an on going problem according to the number of RUclips videos on this same issue.
@@kermitefrog64 there are many different lid designs too; makes it hard to figure what problem people are having. I always criticize manufacturers for optimizing designing for cheapness, but you got to hand it to em, at least ninja made something that could be disassembled and fixed.
I opened my lid up and realized that it doesn't have the button housing that gets screwed onto the lid?? We've been having issues where the lid doesn't close because the tray with tabs that secure the handle down has too much give. Any suggestions on a replacement piece?
@@MicroVortex back when I made this video, you could only find used lids on ebay for like 80 bucks, but new lids are on Amazon for 23 bucks. I would probably just do that as a replacement. Just make sure it fits your exact model.
Thank you for you step by step fix. The 2 medal hooks that came out. I finally found the area to fit them in from you clip.
Thank you so so much!!!! Mine disarmed, and I couldn't use it, but after watching your video, I could finally fixed it!!! Thank you so so much ♡♡♡♡
Man you’re the best, I saved sooo much money. I was literally about to buy a new one.
@@ahmedbishri you made my day! Back when I made this video new lids were not available. Now you can find them on Amazon. Still, if you can fix it, save some cheddar and keep some plastic out of our bodies.
Brother, you’re awesome. Thank you for making this video.
I dropped the top while making margs. The springs and pieces went everywhere. I didn’t even know there were 4 springs until watching your video and then finding the 4th under the fridge. Appreciate you taking the time to record and upload this. You saved the day. Internet high-five. 🤘🏻
Lol, this comment made my day
Thank you so much!!! I had the exact same problem. Button wouldn't work. Took it apart, discovered I only have two of the screws, not four. Hope it's okay. And one of the springs that pushes the button up is missing. But it seems to be working for now. You just saved me a whole bunch of money! Thanks again. 😊
FYI I'm a 69 year old woman. There is nothing that says I have to be a helpless woman! 😁
I bet you can do anything you set your mind to!
A guest dropped the cover and the release button popped out. Your video made the repair reasonably simple.
Fantastic!
I can't believe you were able to find the spring twice! My dropped things disappear forever into the black hole of nothingness!! Even I could have made the repair with your expert instruction. I did get a little nervous when I saw the hammer. I was wondering if we would see smashing if the assembly proved problematic! LOL!
For sure you would have! Smashing is usually ny backup plan. The first smashing was a measured bashing with a rubber mallet to see if I could knock the problem free. When it didn't work I took it apart.
THANK YOU!!!!
YOU SAVED ME A TRIP where I bought the blender or $75 that a lock lid cost!!!
Thank you!!!!.... great explanation 👌!! For ever thankful 👏 🙏! (Joshua's mom)
Lol, I'm really happy to have helped a little! Thanks!
Thanks! With the help of an ink pen spring and your detailed video, the lid is back together and working like a charm.
Fantastic! That was clever thinking on your part. I'm glad my video helped.
Thank you so much for this detailed video. I dropped the lid and it went everywhere. Thank you I was able to couple it back .
Thank you!! I jsut dropped the lid on the floor and now I got it back together!! thanks!
Thanks Alkatross! Something was rattling inside of the lid on our Ninja. I wasn't sure about just popping the lid apart; I was concerned that I would break something else. I went ahead, and it came apart easily. The rattle was from one of the L-shaped pins...it had come out and was just rattling around inside of the lid.
...and yes...the inside of the lid was pretty nasty! 😂
I don't believe in kitchen things you can't put in the dishwasher
@@Alkatross 😅💪
Great Video! I was able to fix the lid on my blender today.
Thank you. I was able to fix the lid of my pitcher with your help. Kudos!
Glad it helped!
This was amazing. Well done
Thank you so so much,you save me and my daughter. ❤❤❤
I'm so glad!
I dropped the lid of my girlfriend blender, thanks to you I was able to fix it!
Much appreciated, i dropped the lid when i was washing it and when it came apart i didn't know how to put it back together right
It's always best to fix it before anyone finds out you broke it. I'm glad this helped! Thanks!
Thank you so much this video was so helpful . I was able to fix the handle on my lid.
Blessings!! Thank you so much 😊. I didn’t find any springs . But it works!!
I meant screws, 😂
@@champagnebubbles7095 springs, screws, same thing, right?
Great video! The button wouldn't unlock the lid. Took it apart and the little plastic L piece was broken. I didn't have that glue, but after watching the video and figuring out what does what I realised a credit card slide down inside the handle would release the two locks and the handle pops right open. (the button opens the side that's not broken, but the other side gets out of alignment). So the credit card on that side and I'm good to go. Saved me buying a new lid. Thanks!
Bro, that credit card trick is genius. I wish I had known that when my smoothie was stuck in there.
😂😂I am having the exact same problem with my ninja. So happy you made this video! I’m gonna fix it 😅❤
Me sirvió demasiado a mí se me cayó la tapadera y se me desarmó toda pero gracias a este video pude armarla otra vez la única diferencia es que mi tapadera no traía tornillos sólo entraba a presión pero muy buen video gracias
Mine is designed similarly but also slightly different. Your lid has the sliding assembly within a case that you screw down. On mine they have eliminated the case and they enclose the beveled pins that have the springs fit through a small opening with a small piece of plastic and the plastic had broken loose so the beveled pins where allowed to move up and down slightly. The problem with my lid is that the locking handle wouldn't lock down and I had to hold it down manually the whole time I would be using the Ninja so that it would come on. So, they have made some minor design changes but they still have not eliminated the problems with the lid.
Brilliant work. I had the exact same problem and glued an appropriate sized lego where you glued the plastic piece. Working great now. Thank you for the video!
I'm glad it helped! Ended up being a fun project.
You really helped me!
Thanks so much!!!!! 😊
Great video. Help us greatly to put the lid assembly back together. We took it apart for cleaning and were puzzled as how to put it back together.
It gets pretty gross in there with dishwasher detritus. Glad you got it clean! 👍
Unfortunately that seems to be a weakness on these lids for years. You would think the manufactures of Ninja would come up with an engineering fix because this has been an on going problem according to the number of RUclips videos on this same issue.
@@kermitefrog64 there are many different lid designs too; makes it hard to figure what problem people are having. I always criticize manufacturers for optimizing designing for cheapness, but you got to hand it to em, at least ninja made something that could be disassembled and fixed.
Saved the day.. thanks!
I'm so glad!
Thanks. This helped a lot!
Se atoró la cuchilla en el vaso habrá alguna tenica para poder sacar la cichilla? Saludos
Thank you
I opened my lid up and realized that it doesn't have the button housing that gets screwed onto the lid?? We've been having issues where the lid doesn't close because the tray with tabs that secure the handle down has too much give. Any suggestions on a replacement piece?
@@MicroVortex back when I made this video, you could only find used lids on ebay for like 80 bucks, but new lids are on Amazon for 23 bucks. I would probably just do that as a replacement. Just make sure it fits your exact model.
If you lost detsil can i order somewhere
Thank you so much for your video.... yeah I fix the release button thanks to you !!!