Look super difficult I love my ninja pitcher system but why in the world would they make the handles susceptible to Gathering moisture and becoming an issue. Why not make the handle solid I truly don't understand that functionality part🤔🤔🤔
Thanks very much. Our handle was disgusting. Was tempted to throw the whole thing out but it seemed wasteful when the blender still works so well. Love how well it blends but will likely not purchase again due to this cleaning issue. As we were cleaning the handle (with the guidance of your video), I noticed we also have a crack developing at the top of the jar, unfortunately, so may end up having to dispose soon anyway sadly! So frustrating how everything is made to be disposable these days.
You dont need to press the button, and it's easier when you flip it over and pry using the same technique , however starting on the bottom.... Pops off with much less force
This is Ed’s wife: I’ve been looking at the building gunk in that handle for months and was so grossed out by it! I finally set to taking it apart today and got stuck after the screws, afraid I was going to break it! Your video showed the right steps and assured me it wouldn’t break! Thank you! 🙏🏻
Awesome! Thanks for the video and reminder on not pulling too hard. I took mine off one section at a time with a butter knife. Worked great. Wedged it in there and only took about 20 seconds. 👍
I was wondering why all the videos didn’t show the popping the piece back into place part…I now know why 😅. Thank you so much for showing me how to remove it, that was half the battle ❤.
Oh wow, Just bought this and the handle! This is revolting and I’m highly allergic to mold, unsafe. And the troublesome cleaning? I should return while I can.
I got this as a holiday gift and was so excited. I can't believe they made the pitcher with this design though. Water got in that part during the first washing, so I tried on my own to remove the part and couldn't figure it out. That's how I ended up here. Just a terrible design element in my opinion.
I just purchased a blender for 200+ I used it once washed it and there’s water in the handle already! To expensive to be taking apart and cleaning every use
I agree. I noticed this and was like wth after taking it out the dishwasher and seeing that gunk in there. It's still sitting in the corner. I'm pissed because I haven't had this one that long. I didn't notice that on the previous version I had.
Very helpful on how to clean the handles. As someone else posted (2 years ago) wondering if there is a trick for getting the other 3 corners off, those are disgusting too. Poor design.
I just bought a Ninja from Costco and the very first time I washed it (before use), I noticed there was water in the handle. I think I'm going to return it.
Look super difficult I love my ninja pitcher system but why in the world would they make the handles susceptible to Gathering moisture and becoming an issue. Why not make the handle solid I truly don't understand that functionality part🤔🤔🤔
Thanks very much. Our handle was disgusting. Was tempted to throw the whole thing out but it seemed wasteful when the blender still works so well. Love how well it blends but will likely not purchase again due to this cleaning issue. As we were cleaning the handle (with the guidance of your video), I noticed we also have a crack developing at the top of the jar, unfortunately, so may end up having to dispose soon anyway sadly! So frustrating how everything is made to be disposable these days.
I can't believe there is content this specific on RUclips. Thank you so much for this video 😂
You dont need to press the button, and it's easier when you flip it over and pry using the same technique , however starting on the bottom.... Pops off with much less force
This is Ed’s wife:
I’ve been looking at the building gunk in that handle for months and was so grossed out by it! I finally set to taking it apart today and got stuck after the screws, afraid I was going to break it! Your video showed the right steps and assured me it wouldn’t break! Thank you! 🙏🏻
I have tried many methods on how to open the bottom piece of my ninja the blender, its getting really gross, any ideas?
Did you find a solution? Mine’s gross too!
Mine too. Do you have the PS100?
Me too, I've tried pulling the corners off, no luck.
I can’t believe I’m searching for this videos. I HATE this blender!! I can never look clean 🤬
OMG this is ridiculous. I can't believe there is no way to clean the disgusting filthy crud out of the handle without breaking it.
What about taking off the other 3 corners of gray plastic to clean in those other corners?
Screws on the bottom
Awesome! Thanks for the video and reminder on not pulling too hard. I took mine off one section at a time with a butter knife. Worked great. Wedged it in there and only took about 20 seconds. 👍
This worked for me and gave me confidence that I would not damage the handle by prying, Thanks!
Thanks for sharing this, I’ve been looking at mine wondering how to clean it. I’ll be doing this later today!
Thank you very much, I spent a year without knowing how to remove that to clean it. I did it as is, and it worked
This was extremely helpful!!
Just what i was looking for. Thank you!
I was wondering why all the videos didn’t show the popping the piece back into place part…I now know why 😅. Thank you so much for showing me how to remove it, that was half the battle ❤.
Can you make a video on how to take the lid apart because I noticed there is some gunk inside the lid as well 👀
Thank you for the request, though unfortunately I cannot as I no longer use this unit. I hope you find what you are looking for though!
Oh wow, Just bought this and the handle! This is revolting and I’m highly allergic to mold, unsafe. And the troublesome cleaning? I should return while I can.
Would using clear silicone on the handle prevent the guck from getting in there?
I got this as a holiday gift and was so excited. I can't believe they made the pitcher with this design though. Water got in that part during the first washing, so I tried on my own to remove the part and couldn't figure it out. That's how I ended up here. Just a terrible design element in my opinion.
what model is your ninja blender? I'm trying to figure out what would fit my xtra pitcher with that larger round base thanks
Thank you. Thank you so much.
I just purchased a blender for 200+ I used it once washed it and there’s water in the handle already! To expensive to be taking apart and cleaning every use
I agree. I noticed this and was like wth after taking it out the dishwasher and seeing that gunk in there. It's still sitting in the corner. I'm pissed because I haven't had this one that long. I didn't notice that on the previous version I had.
Very helpful on how to clean the handles. As someone else posted (2 years ago) wondering if there is a trick for getting the other 3 corners off, those are disgusting too. Poor design.
Did you find out how to remove the corners? I’m still trying
Me too.. came here to see if anyone knows 😅
Screws on the bottom
Thank you! well explained, it was really helpful 🙂
Thank you so much for this was so helpful. I knew it looked like it should come off, but I wasn’t certain. So gross, but at least we can clean it now.
Thank you
I wonder if we can just use flexseal to seal it.
Thanks
Awesome guid thanks for thanking the time and making it! Jesus loves you!
I just bought a Ninja from Costco and the very first time I washed it (before use), I noticed there was water in the handle. I think I'm going to return it.
What a stupid design. Mine is full of bits of pureed food
not simple, very difficult and nerve racking- fearful that by applying pressure to remove handle may break it!!😢
Nice
Didn't just pop off for me. Snapped in half. Really frustrated they built it like this
How about the legs