The video would have been more helpful if you had shown us how to install the new gearwheel and show us how the blender is now working after the wheel has been replaced.
Hi. well no I ain't find the gears. I try all how. I try with the model and brand name and no result. I try for days and noting. I don't know if the gears available for that product. If you do come across the gears let me know. thank you.
No. I haven't find the plastic gears. I try many times with the items brand name and serial number but no luck. All the 3 gears work together same speed.
I not sure about your model you have if it have a safety switch. I don't think I fix any one like what you have. But you can look at the manual book and find the safety switch if it have any.
I'm not sure how to remove the handle. I not sure if I make any video on how to remove the handle and how to clean it. You will have to look and see if I make any video on that. I don't keep records on what videos or what I repair it to much videos I make to keep records on everyone.
Good day Sir, I have that same blender but my problem is that only the single serve cup works. The power light keeps blinking when I try to use the jug or the processor. I made sure to close properly, line up the arrows but it still blinking. Please help me.
Now I can't remember everything. But I think you need to clean the mug clean I think it have a pin on the mug to activate the blender. Can't remember. Sometimes you just need to clean the both blender and mug and line them up right. If those things ain't work. Then it could be the circuit board is the problem.
I having the same problem with this blender. I can't locate the gears. I look online and nothing And no where I can't find it. But if you happen to locate it. Let me know thank you.
Hi. Ok is like this. I didn't make a video on how to open it because i know is the gears that gone. Because of my 13 years of experience. But to get to the gears is very tricky to take it apart at first. I can't remember how I took it apart. I didn't get change to make a video. But when I get another one like that I'll make a video on how to take it apart and locate the gears.
I didn't get to fix it again because I can't locate the gears online or anywhere else. I try for days no results. I even try looking for the model and brand and no results. If you do come across the plastic gears let me know. Thank you.
The video would have been more helpful if you had shown us how to install the new gearwheel and show us how the blender is now working after the wheel has been replaced.
I agree but it was helpful as I thought there would be a rubber belt inside.
Yo tengo duda en cómo sacar esos acoples
This is my problem definitely. Can you tell us where to buy the replacement parts and demonstrate how to install them?
Hi. well no I ain't find the gears. I try all how. I try with the model and brand name and no result. I try for days and noting. I don't know if the gears available for that product. If you do come across the gears let me know. thank you.
Hi Sir! Were you able to find those plastic gears? And do spin at the same speed with the motor or do they provide any speed change to the blades?
No. I haven't find the plastic gears. I try many times with the items brand name and serial number but no luck. All the 3 gears work together same speed.
Hello!
Can you please advice on my Ninja BN801 not starting due to overvoltage?
Where to find the safety switch?
Thank you
I not sure about your model you have if it have a safety switch. I don't think I fix any one like what you have. But you can look at the manual book and find the safety switch if it have any.
Just started having this problem how do you find the replacement gears??
No. I try looking all over but no luck. I don't know where else to look. If you do find them let me know. thank you.
I need to remove the handle of my Ninja Power Pitcher since food is between clear and black part of handle. anyy suggestions?
I'm not sure how to remove the handle. I not sure if I make any video on how to remove the handle and how to clean it. You will have to look and see if I make any video on that. I don't keep records on what videos or what I repair it to much videos I make to keep records on everyone.
I have the same problem on my Ninja. Where can I buy the gears and do you have a video instruction on how to go about tge repair
If you find out let me know
Please show us how to replace the new one?
Good day Sir, I have that same blender but my problem is that only the single serve cup works. The power light keeps blinking when I try to use the jug or the processor. I made sure to close properly, line up the arrows but it still blinking. Please help me.
Now I can't remember everything. But I think you need to clean the mug clean I think it have a pin on the mug to activate the blender. Can't remember. Sometimes you just need to clean the both blender and mug and line them up right. If those things ain't work. Then it could be the circuit board is the problem.
Thanks alot, will give it a try. Have a blessed day
I have the same problem where can I get the parts or where r u located
I having the same problem with this blender. I can't locate the gears. I look online and nothing And no where I can't find it. But if you happen to locate it. Let me know thank you.
how to change or view the plastic gears?
Hi. Ok is like this. I didn't make a video on how to open it because i know is the gears that gone. Because of my 13 years of experience. But to get to the gears is very tricky to take it apart at first. I can't remember how I took it apart. I didn't get change to make a video. But when I get another one like that I'll make a video on how to take it apart and locate the gears.
I didn't get to fix it again because I can't locate the gears online or anywhere else. I try for days no results. I even try looking for the model and brand and no results. If you do come across the plastic gears let me know. Thank you.
I have a problem with my blender it's not spinning can you fix it where are you located
Hi my name is sabita i am not getting enought power do a contact number am address
Most of the time the gears wear down.
amigo, el mango de mi licuadora no bajo ppr lo tanto no deja trabajar
I have one to fix mister fix it
Not helpful
Not good