Router Subbase & Centering Cone
HTML-код
- Опубликовано: 7 фев 2025
- Hello friends
I made two parts that bring out the performance of the router 100%.
High-precision centering cone and high-precision sub-base.
Use these two to dramatically improve router accuracy.
Jig plan convenient for woodworking
[Plan List]
jsk-koubou.sto...
![drill press table with a fence & 2 vices in 1 / sliding dovetail rail [woodworking]](http://i.ytimg.com/vi/v3WF4_XrquI/mqdefault.jpg)
If you find any unauthorized reproduction of the JSK-koubou video, please report it to me.
Thank you.
JSK-koubouビデオの無断複製を見つけた場合は、報告していただけると助かります。
No product to sell, no unnecessary chatter, no spectacular gestures, no aggressive music.
Only good content. J'adore !
"Research of cause... ... Make a base plate" Proceeds to make adjustment of tiny fractions of an inch with his own hand made tools. You Sir, are a master, and it's been a pleasure watching your progress through your videos. Thanks for your calm and expert tutorials that suit me perfectly with no speech. I learn with my eyes. Thanks again.
Your precision and attention to detail is sublime.Thank you for your lessions. From Portugal.
The wings of the gnats can also be corrected calmly and patiently.
Your attention to detail is admirable, I congratulate you.
As always you did a great job, bravo.
Thanks for this video. It's ironic that you had to make a new router base because the factory-made one wasn't accurate. Your methods are first-rate always. When you use accurate tools and jigs, the results will be very accurate as well. I have always given a "thumbs up" after every video I've ever seen of yours.
Showing how to do things without the chitchat, “Priceless“
I’m liking and subscribing!
You are a master. Thank you! You're brilliant! I'm so happy that you share with us!!
Very impressive... As usual. Excellent precision and accuracy.
the elegance in in the simplicity - I hope this translates 😀
I love it, you had a problem, you knew how to fix it. It wasn't perfect, so you made it better. Great video! Thank you
Браво!!! Как только не извращался, для того чтобы выставить базу((( Но до такого простого и элегантного решения не додумался.
You are seriously fantastic. I will copy it immediately. My hand will thank you.
Good one! I just bought a Makita battery trimmer. I think it is more accurate than the one in the video, but I will check it out anyway. Thanks for the tip.
Love the precision you strive for Koubou.
ありがとうございます
Великолепная работа. Очень высокая точность изготовления детали. Молодец!!!
Quelle ingéniosité !
Bravo et merci pour le partage !
いつも「なるほど」と関心しちゃう～
シンプルで直線的に正解に向かう感じ、いつも素晴らしいです～
That's one hell a clever solution 🔥
Precisely 👍👍
Incredible, the video is very explicite, there is no need to speak!
Hey, super gemacht und ein klasse Tipp, dank dir fürs zeigen, VG 👍😁
Fantástico! Eu admiro muito este zelo pela precisão no trabalho. Você é um excelente profissional! Parabéns! Agradeço a você por compartilhar essas soluções inteligentes!
Excellent, very impressive. Thank you for sharing fantastic ideas.
oh man, this is just wonderful. Thanks.
travail toujours aussi réfléchi. Merci a vous
and something like a glow forge laser cutter can cut acrylic really easily too, that probably make quick work of a new base plate too!
I forgot to say I also have a 60W laser machine.
However, this thickness of acrylic cannot be cut.
Festool move over JSK-Koubou tools are here!
good idea
Молодец! Весь косяк в родной заводской накладке подошвы.Таким грешат все производители,кроме Festool,при всей моей нелюбви к этой марке должен признать что качество изготовления у них на высоте.
After finding the error and brilliantly fixing it, I have to assume the t-tracks needed to be adjusted so a NEW reference cut could be established???
Que bom que tem pessoas como você para nos mostrar as imperfeições que o tempo de uso de certas ferramentas nos trás. Obrigado.
13:25 Again. Perfect! Love it.
First class as always.
Excelente, me gusta mucho su forma de trabajar y de hacer las cosas, un verdadero Profesional, así como debe ser,es un gusto ver sus videos, saludos cordiales desde Chile, gracias
Excellent. Thank you.
no comment , exellent job brilliant idea !
Excellent.
From Algeria.
How did you make vertical stand for drilling - kind of metal.. cannot find it in video list )
thanks for the good work, but work with resin is complicated and long lasted work, and not healthy, you could do that with woodwork lathe too. i am your fan, best regards
Great video.
そうそう、冒頭でルーターの昇降装置のロックを外したままセンター合わせしていますが、このまま増し締めするとロックするときに芯がズレます。
必ずネジを増し締めするときにはロックをした状態で行いましょう。
言葉で説明するのは難しい。これで伝わるかな？
clearly,👍👍👍👍👍👍👍👍👍 JSK the best 👍👍👍
Where is the video that shows the drill guide?
Hi! Very well done! What kind of plastic is the white one?
Very impressive! Great job.
Just a suggestion, would it have been quicker to take a shaving of material from one side of the base to center it up accuratley, as a transparent base seems much better than an opaque one. Interesting as always.
I think it might have been easier to remove a little off of one edge, Certainly most guys would have done that.
You are actually supposed to use the same flat edge in both directions, same edge same distance!
Still I love the centre tool!
Master of the Master
Why you didn't sand left side of plexi sub base for 0.37mm? Or you could coat right side some paint or varnish.
Wow... That's actually a fantastic idea, man! 😮
Really well done!!! 👏👏👏👏👏😃
Could you make a video for a square base, please?
So Amazing!!! Even Quite Impossible !!! But True !!! (USA)
Fantastic ideas and really enjoy no music and the execution of each project. I used your link to try to purchase some of your plans but the adjustable jig you made associated with this video is not listed, also all of the plans say "SOLD OUT", how can you be sold out of the plans? Will you explain this please, there are several I am interested in. Thank you.
perfect . engineering mindset. good job dude
as always made with skill 👍👍👏👏👏
Super 👍
I never knew that rubbing alcohol would weaken double-sided tape, but now that I think about it, it makes perfect sense.
Its a great video,
Wow, amazing your Idees. Thank´s for Video. Many Greetings from germany
You are a really master
Good idea well made.
Eres el mejor. Desde México saludos.
🇵🇱 Piękna robota 👍 👏😁
Has JSK-koubou shared details of the mobile drill stand he uses in this video? I would certainly like to build one.
It's not the same one, but I've found this one he made last year: ruclips.net/video/a2kIJDhhZrg/видео.html
o cara consegue fazer coisa muito mais bem feita do que as empresas muito top
Well done.
very clever
Отлично ! Вы делаете оснастку и приспособления , а когда готовые изделия !
Yes. Perfect
This is just excellent!
Perfect as always !!
What it that bits?
I do not have
not even the slightest idea.......
Bravo complimenti..😉
Was thinking he’s gonna need a lathe, ooops nvm. 🤣👍
What a genius!
Excelent!!!!
"Alcohol weakens double-sided tape." +1
Thank you.
Great idea...
Wouldn't have been easier to just trim or sand the wider side down to the proper size?
@@GoGoBozic yes, absolutely!
Excellent!
13:28 Some would translate that as "Dead Nuts".
If I can't use chop sticks to hold the bit can I use a fork instead? Sorry, couldn't pass that one up. 😏
If there is something really admirable to watch, is a Japanese being Japanese.
Perfect !👍👍👍👍👍
Am in the process of buying a cordless Makita router, I wonder if its out of line like the Dwalt ?
Yes it is! I have the cordless brushless one and the base is out of center
@@us1111forpresident thanks
sorry to be a downer, but there's this new technology, maybe you've heard of it, it's called 3D printing... works great for stuff like this
3D printers are very inaccurate.
By the way, I also have a lathe and a CNC milling machine. Of course, I also have a 3D printer.
3D printers are great for making toys.
It doesn't make tools.
Да, хорошо базу прокачал. Годно!
Что за фрезер??
нервы железные !
DeWALT D26200. У меня такой же.
@@pegasius1981 А че он такой дорогой? Только из-за алюминия что ли? Цанги 6 нет, насадок нет, одна кривая подошва и все. Плавного пуска нет. Балансировка никакая, появляется биение при работе с большими фрезами. Сделано в Мексике).
@@MxSoM сделано в Мексике или сделано в России, что выберите?
@@yura979, выберу СССР!
Should have marked where the first cut ended before you made the cut from the other side, just to point it out.
Спасибо!
Hello. Why didn't you choose Makita RT 0700? And chose Dewalt262204?
because are equal quality ... :)
@@CzKaa maybe Makita has a perfect platform :)?
Dobra robota, perfekt
Cheaper to just buy one.
Brilliant
masterpiece !!!
mindblowing
Why not just use flat head screws to mount the sub-base?
よく見ましょう
Perfect.
NICE!
I like it.
Show.👏👏👏👏👏