How to make a Transition from a Metal to a Rubber Roof
HTML-код
- Опубликовано: 26 июн 2024
- See how to make a Transition from Metal to EPDM Rubber.
This video is about How to Repair a Metal Roof Leak Repair that ends on a flat rubber roof. Most of the time, these transitions from Metal to rubber leak and are tough to seal. I will show you how to repair this and the tools and materials needed.
You can find Super Silicone here: bergstromm.com/
This is my son's RUclips channel. An honest roofing professional: @allroofusa6762
Watch this video to see how I repaired these leaks: • How to Repair Rusted H... .
More videos on Metal Roof Leak Repairs: • Metal Roof Edge Repair...
Metal Roof Seam Repair: • Repair Metal Roof Leak...
FTC Affiliate Disclaimer - I get commissions for purchases made through links in this post.
Chapters:
0:00 Metal Seam Leak Repair
0:15 Tools and material
0:56 What went wrong?
1:34 How to remove tar/caulking
3:25 My joke to make you laugh
5:52 Applying Super Silicone Seal
8:14 Showing 2-month-old repair
General Instructions on How to Fix Leaks on a Metal and Rubber Roof:
1. Locate the leaky area. Either a seam or some flashing is the most common cause of leaks
2. Remove all the caulking, tar, and tapes people have used to attempt repairs
3. Use an angle grinder with a stiff wire brush to remove any silicone or tar and to smooth out the surface
4. Take a rag and dose it with Lacquer Thinners to clean the surface of the area to be repaired
5. Use masking tape to tape off the area where you want to make the repair
6. Apply 1 thick coat of Super Silicone Seal or Super Silicone Seal over the seam or approximately 5" wide
7. Embed the Polyester Fleece into the coating
8. Apply a top coat of Super Silicone Seal or Super Silicone Seal over the Polyester Fleece. Make sure to cover the fleece completely.
List of Tools and materials needed to make the repair:
1. Estwing Flat bar - to remove heavy tar and caulking
2. Angle Grinder
Wire Brush
3. Lacquer Thinners
4. Rags
5. Masking Tape
6. Protective eyeglasses
7. Scissors
8. Leaf Blower or Broom
9. Super Silicone or Super Silicone Seal - bergstromm.com/ 
Хобби
Cleaning of the materials and tutorial was awesome! Makes me want to dive right in!
Beautiful job.
Thank you! Cheers!
👌
Excelente trabajo 👍👏
Thank you sweetheart, you are the best. Soon we will be making Pizza
I've learned quite a bit from you Dr. What is the difference between Turbo Poly Seal and Xtreme Silicon Seal; in purpose as well as application?
Why did you not use the Turbo Poly Seal?
@flat roof doctor can you make a video of shingle roof to flat roof please
I have a video on that. ruclips.net/video/Uv7DRDpv4ek/видео.html
too bad it is condensation from the metal, will for sure leak again
Does this repair work on a transition from asphalt shingle roof to epdm flat roof as well?
You are not supposed to have a shingle roof and a rubber roof joining each other unless they are seperated by a synthetic felt,the rubber will fail sooner being in contact with the rubber roof.