Widebody 3000gt VR4 is finally ready for paint. AeroCatch hood pin install and modified rear bumper.
HTML-код
- Опубликовано: 24 июл 2024
- The 3000gt is finally ready to get painted. In this video I swapped out the 1st gen rear bumper and replaced it with a 2nd gen bumper with a few modifications for a more aggressive look. I also cut the evil eye hood to fit over the 3rd gen 1999 headlights and installed an AeroCatch 120-2000 hood latch.
I added links to all of the parts shown in this video. Be sure to go check them out. If you have any questions feel free to ask.
99 Combat Wing from Aaref Alali Resurrection 3000gt
groups/69169...
Twin Z Roof Spoiler Type 2
www.twinzdesign.com/models/mi...
Top Secret Evil Eye Hood from GTOKNG
gtokng?hl=en
groups/60474...
AeroCatch 120-2000 Hood Latch
shop.redline360.com/products/...
Scotch 3M Double Sided Mounting Tape Extreme
www.homedepot.com/p/Scotch-1-...
Links to additional parts in the car.
R'Venge Performance Coil on Plug kit
www.rvengeperformance.com/pro...
R'Venge Performance Solid Poly Motor Mounts
www.rvengeperformance.com/pro...
R'Venge Performance 60K Race kit
www.rvengeperformance.com/pro...
R'Venge Performance AEM Series 2 ECU
www.rvengeperformance.com/pro...
R'Venge Performance BC Cam Gears
www.rvengeperformance.com/pro...
R'Venge Performance BC Titanium Retainers and High Rev Springs
www.rvengeperformance.com/pro...
Chase Bays Coolant Overflow
www.chasebays.com/collections...
3SX ABS Delete Kit
www.3sx.com/3sx-abs-delete-ki...
3SX AC Delete Kit
www.3sx.com/ac-delete-kit-ac-...
Craftworks Industries Billet Oil, Clutch, and Brake Caps
www.craftworks.industries/sto...
Stoptech Slotted and Drilled Rotors
www.buybrakes.com/1992-mitsub...
Stoptech Brake Lines
www.buybrakes.com/stoptech-95...
Aodhan DS02 18x10.5 +15
www.fitmentindustries.com/buy...
CXRACING FRONT MOUNT INTERCOOLER
www.cxracing.com/products-by-...
Tein Flex Z Coilover
www.fitmentindustries.com/sto...
Mishimoto Radiator
www.mishimoto.com/mishimoto-a...
Mishimoto Radiator Fan
www.mishimoto.com/mishimoto-m...
REVEL Exhaust System Catback Exhaust - Concept G-Blue
www.3sx.com/tanabe-exhaust-sy...
0:00 - Intro
1:00 - Removing 1st Gen rear bumper
7:46 - Modifying and installing 2nd Gen Rear bumper
14:50 - Mounting the intercooler
20:54 - Cutting the Evil Eye hood for Headlights
20:16 - Installing AeroCatch Hood Latch
39:38 - Finished car walk around
43:56 - First Test drive
46:50 - Final thoughts on moving forward
48:10 - Outro Авто/Мото
The car looks amazing.... congratulations and enjoy that wonderful beast.
After paint it's getting a full engine rebuild
Corvette Supersonic Blue would look amazing on that car. This is 7 months late though. I'm fitting the victory racing evil eye hood on my 95 vr4 and this video is going to help tremendously with the Aerocatch pins
Looks really good. Great job with fitting the kit, your fitment etc
Great work my favorite Mitsubishi 3000GT channel
Never been a copy cat nor wanted to widebody my vr4 but you sir have changed my mind. Will be following your footsteps when the time is right. Thanks for the awesome videos broski
Definitely look into doing it. A few options out now on different styles of wide body fenders
@illusiveinu I have looked since watching your series but to me this is one of the best designs I've seen for the 3000gt
Fantastic looking build from top to bottom. Thanks for sharing.
Bro that looks sick, cant wait to see the whole car paint!
Good job buddy, can’t wait for the fresh paint, 👏🏻
You just made me miss my Stealth Turbo so much. What a wonderful car.
it looks amazing as is imagine with the paint !
I cant wait for paint. I'm so ready
Hey bro, looks great, honestly I was never a fan of the later generations. Liked the pop up gen better but this build has won me over. Amazing it works so well, will look mad in full red.
Thank you. The car did originally start off with pop ups. I do want to make another one later with the pop ups but use a more boxy looking kit.
Looks sick af 🔥
Thanks
My vote goes to Rotor Glow (Orange/Red Pearl), it was the special OEM colour for the 2009 and up Mitsubishi Lancer Ralliart with fully loaded options(basically a base model body with the Evolution drivetrain and interior)
The 3000 is a sick looking car u made a sick car 🔥
Thanks. Hopefully paint will make it pop
son of a gun grey metallic would look beautiful. I plan on doing mine just black metallic though
Oh yes that is a good color
The 3k is looking slick! Shame about the crack in the hood on the passenger side above the headlight, the rear defuser looks sick, you should really try to pick one up! Keep up the good work!
Edit: should look into the color Obsidian black
Yeah that was my bad. I pushed a little too hard when fitting the latches. But thankfully it will get fixed and reinforced when I hand it off to the body shop. I have been itching over a black car. My old eclipse was black and I loved it. I am playing around with making a rear defuser actually. Using foam board to mock everything up.
Hell yeah dude!!
I cant wait
I wish this kit didn't take the panels so close to the headlights and door seams. It would be nice if the panels could be molded and seamed to the existing.
Keep it red!
with the hooded vents, will it be a problem to drive in the rain?
What year is the widebody kit for the stealth that you got? I might be interested.
how did you make the headlight look so aggressive ?
Hi, tell me, did you make these gray extensions yourself or did you buy them somewhere?
Will these parts be suitable for the first generation GEN1?
Привет, подскажи данные серые уширения детали делал сам или где-то покупал?
Подойдут данные детали на первое поколение GEN1?
ive never seen a midnight purple 3s but i do know that it is a expensive color
what a car
😊
Bro!! Gotta keep it OEM caracus red!!
Trust me I'm so torn with keeping it red. That was my original plan. I even have 2 gallons of the paint.
I'd paint it a medium to slightly darker blue
95. Dodge stealth color❤ emerald pearl green
Oooo yes. I know Megan would like if I painted it green
Took a super hard to find classic and turned it into a washing machine!! not gonna make it any faster just so you know as for the value, from perhaps 20k stock value to now a whooping $500 if you are lucky.
Pssssh I would pay way more than 500 for this car with all the work done to it 😂 so there you go, your opinion is now useless
If you do change the color from red then i feel sorry for the dude painting it. As you know there is so much stuff that will have to come back off.
Thankfully the paint and body guy is ready for the challenge
@illusiveinu he is going to be under alot of pressure as now the whole world will be watching for the end result 😀
Who did your taillights?
Himself, on another video
anyone else have only 360p quality?
yes
Should be full quality now. RUclips sometimes takes a bit to upload all the qualities.
Yeah standard should have went live first. I believe youtube was saying like 4-5 hours for the HD version loaded
@@illusiveinu ah ok next time ill wait. But definitely love the way the car is coming out... kep it up
If you have a 91 then I would say the super rare turquoise color “Jamaican blue” paint code from Mitsubishi is T72. That is the color on my VR4 and I love it
Mine is a 92. Thanks for the color suggestion