Rookie Pilot / Turbo Timber Evolution flights in Safe & Acro
HTML-код
- Опубликовано: 7 ноя 2022
- I take my new Turbo Timber Evolution for 2 flights on a perfect fall afternoon.
Spektrum Smart Lipo - 3200 mAh 4s 50c
Radiomaster TX16s
GoPro Hero9 head mounted Развлечения
nice job brother beautiful plane
Good job mr. First time is always scarry . But u nail it😊
Very kind words, thank you for watching. I'm hoping to film another Timber video soon!
Wow, the sky is totally sprayed, unbelievable!😓
Very nice. I've got the original Timber 1.5. I've seen the EVO flown by one of our club members. Better featured and better flying than my original Timber.
Appreciated! I did quite a bit of research before buying this plane and it checks all the boxes for me, very happy. Have fun!
Love safe mode
Sure is nice to still have a plane. :D
As long as it's in one piece that's a good landing 👈🏽🇺🇲
I hear that! Thanks for checking out the flights.
I have same radio and just purchased the same timber. On model set up did u have any problems setting up radio ?
It was super easy! I found plenty of videos on here explaining it. I don't have reverse thrust without extra hardware/firmware and better tech knowledge, though. Good luck and have fun flying the beast!
How did you get safe mode on the radio master?
I watched this video. ruclips.net/video/BuT_T3DERjg/видео.htmlsi=gy4UB5t4O226aZW9
Excelente video amigo. Me puedes compartir como configuraste tu Radio Master?
Thanks! I found a lot of videos on RUclips that explain it better than I can. That's how I was able to set it up, but it is fairly simple to bind! Try and do a search and you'll find it.
@@LiftVector gracias. Me refiero al mapeo de canales y configuración de flaps.
@@Heinekeners So my flaps just ended up on channel 6 automatically after binding. Maybe channel 5. But if I remember I just assigned a switch to one of those channels and it was a 3-way flaps! :D
@@LiftVector muchas Gracias
BTW, if you feel like you need practice, use a simulator. Phoenix is free, good, and you can use your TX16s for inputs. It will teach you a LOT!
Awesome, thanks for the heads up! I'll search for it. Winter is coming, might be a good time.
Did you set up thrust reverse? Great flying! Good video for shooting it yourself. I want that plane.
Thanks for checking out the vid! I researched a lot and came to the conclusion that I would need extra hardware to connect to the receiver and TX16s to work together nicely, I'm not really sure...I wish I had thrust reverse setup, but it is a little too involved for me right now. Great plane if you have some stick time!
@@LiftVector look up "Stick Programming" for the Avian ESC and watch a couple RUclips videos. You can find the ESC manual online and follow it to set the reverse thrust by listening for the tones as you progress through the settings. Took me a few tries to get it right but I got it working. I'm using a Zorro transmitter so it will definitely work on your TX16S.
Beware,RF signal low at such short distance likely means you have some radio issue. Did you put the antenna in the right direction on the radio? Should be 90 degrees, pointing straight up. Try to do a range test and resolve that issue or you may lose the plane :( It should give you low signal warnings at like a kilometre or more!
Dude!!! I'm getting sketched out about that. I'm glad you said something. I do have my antenna in a straight up orientation (I'll have a double check again after my hands relax). I might be pointing my hands down too far with the transmitter angled down or something. I'll do a range test and see if anyone else has this issue.
What is acro?
No automatic leveling but the gyro is still processing (AS3X).