Don’t feel silly Alisha. You guys are real that’s what we all love about you guys. We can relate!,, and trust me you know so much more than a lot of us!, ❤️
1:35:41 I purchase the FLAT EDGE sublimation tumblers to avoid that awful rounded bottom. I get perfect tops and bottoms every time. I trim the paper to the exact height of the tumbler and tape it without allowing any air pockets at the bottom, top, and down the side seam. Roll the top and bottom on the table to ensure the tape is secure to the tumbler. Then I use something to go up and down the side seam. A year later, you may be already doing this.
If you don't have a roller. You can place your mat cover over what you want to cut and use your scraper to rub it down. I do it all the time. Works great.
Just a quick note about sublimation on wood: If you are using blanks, such as bamboo cutting boards from Dollar Tree, just sand them first, and then seal them AFTER you put your design on them. Works fantastically! The subli ink does NOT want to penetrate the coating that is already present.
For the question about the bird - do not sublimate in the same room as the bird, it can kill the bird, you can't use any thing scented, no Teflon, no auto clean oven, etc. with a bird so the heat press is not any different. my bird is 4 rooms away and I keep my craft room door shut - I have raised and bred birds for over 10 years, but do not have a bird within 2 rooms of a press.
I made a mug using design which I used sublimation & printed it out. But I forgot how to do it since it was a while ago 🙄. I learned a few things from this video
If one doesn't have a sublimation printer can you use cricut infusible ink pens to draw an image onto laser copy paper as an alternative way to sublimate?
I'm do confused on the pink sublimation shirt. What was the purpost of using both metods sub and vinyl It seems like a waste of material and extra work. This just gave me headache.
If you have your sublimation printer set up to Mirror every time you print, do not mirror in design space. or whatever program you use, it will cancel it out and won't mirror at all
You'll have to use a syringe to suck the ink out of the tank, then flush the tank several times with isopropyl alcohol to clean it out, then replace with the sublimation ink, and run several nozzle cleaning cycles to further flush the system.
Don’t feel silly Alisha. You guys are real that’s what we all love about you guys. We can relate!,, and trust me you know so much more than a lot of us!, ❤️
Aww!!! Thank you so much!
1:35:41 I purchase the FLAT EDGE sublimation tumblers to avoid that awful rounded bottom. I get perfect tops and bottoms every time. I trim the paper to the exact height of the tumbler and tape it without allowing any air pockets at the bottom, top, and down the side seam. Roll the top and bottom on the table to ensure the tape is secure to the tumbler. Then I use something to go up and down the side seam.
A year later, you may be already doing this.
Spray with peroxide and lower heat press but not touching it and it will clear up brown.
If you don't have a roller. You can place your mat cover over what you want to cut and use your scraper to rub it down. I do it all the time. Works great.
Just a quick note about sublimation on wood: If you are using blanks, such as bamboo cutting boards from Dollar Tree, just sand them first, and then seal them AFTER you put your design on them. Works fantastically! The subli ink does NOT want to penetrate the coating that is already present.
I have bought blue crickey tape from waomart
If you don't use peroxide it will wear out over time leaving small holes throughout your garment.
For the question about the bird - do not sublimate in the same room as the bird, it can kill the bird, you can't use any thing scented, no Teflon, no auto clean oven, etc. with a bird so the heat press is not any different. my bird is 4 rooms away and I keep my craft room door shut - I have raised and bred birds for over 10 years, but do not have a bird within 2 rooms of a press.
I agree, I have an African grey for 12 years & I close the door.
I made a mug using design which I used sublimation & printed it out. But I forgot how to do it since it was a while ago 🙄. I learned a few things from this video
If one doesn't have a sublimation printer can you use cricut infusible ink pens to draw an image onto laser copy paper as an alternative way to sublimate?
I'm do confused on the pink sublimation shirt. What was the purpost of using both metods sub and vinyl It seems like a waste of material and extra work. This just gave me headache.
Shouldn't you put a layer inside the t-shirt so the inks don't possibly bleed thru to the back of the shirt?
Do you have to be a makers Gonna learn member in order to purchase the makers gonna sublimate course?
Nope!
If you have your sublimation printer set up to Mirror every time you print, do not mirror in design space. or whatever program you use, it will cancel it out and won't mirror at all
The SureColor F570 Dye-Sublimation Printer prints 24" wide it's the other Sublimation made Printer that Epson has
Love it love it I have a question is Leonardo studio the same as Inkscape and if so, what do you like better?
After bleaching, its best to wash with cold water to stop bleaching process!
Great tip!
If I have already put regular ink in printer is it still possible to convert to eco tank sublimation printer? Anyone? Thanks.
It's a process, but it is possible
You'll have to use a syringe to suck the ink out of the tank, then flush the tank several times with isopropyl alcohol to clean it out, then replace with the sublimation ink, and run several nozzle cleaning cycles to further flush the system.
Great. Thanks for your time. I'll give it a try.
@@-_.-._GiNa_.-._-
Hay guys catching up .
Wendy from the 🇬🇧
Hello hello!
Dropper tool!!!
Can you sublimate on any arcylic
I been there
If the white part turns brownish, lightly mist with peroxide,& place under heat (hover it) press few seconds , it'll turn white again DO NOT PRESS IT
What brand shirts do you use for sublimation?
I went to Bradshaw blanks and still can’t find it. Thank you for the great video!
You are so welcome!
@@MakersGonnaLearn. I can’t find it either. Do you have the direct link to the adhesive spray? Thank you.
Al
I have seen someone use an airfryer to sublemate a mug.
Why a long video?
$25?? Its off center and crocked.....
Am I the only one that sees how crooked & off center this design is?
No, you aren’t. These are ‘hobby level only’ designs… I’d never try to sell this!