Yep, he put too much power to it. Some people don't have car audio common sense. Any 2.5 inch voice is gonna struggle with 2000 watts. There are only maybe 4 different 8s out there that will take 1000 rms. He would've blown a Skar zvx 8 with the same power.
Tht 1000watt rms of Rockville everyone knows is garbage u got put the cea rated if not buy buy sub and u or him was sending 2k chess tht sub did and out perform a lot of subs
@@eddieherrod6632 have you tried any of the Skar Audio stuff? I bought to zvx 15s and a Taramps bass 3k. Im anxious to see how it sounds in my Tahoe. Ive got some older soundstream 15s and 2 1k Crunch amps at the moment. Sounds good, just not enough for this old bass head nowadays lol. I built a box similar to the Steve Meade design. Just gotta find time from work to install it all.
Audiopipe Amps are VERY SOLID so it's easy to blow any subwoofer with that raw power. On the other hand, if you had the HZ dial below 50 on any 8" subwoofer you get to see what it's made of. I think the 8" PUNISHER 3000w might be able to handle that frequency.
So just so everyone knows. Your suppose to break in your subs. You have to run it at its rms watts (if its 600w rms then they have to be run at that with normal music. Not a test tone) and the break in period is 2 weeks at the very least in my opinion. Make sure your volume never goes past whatever 70% of your volumes is. So if your volume can go up to 35 then only ever run your volume at 25. Never push it. Youll notice a difference after 2 weeks and ghen you can push them but if the subwoofer is 2500watts max then dont ever go past 1800watts. Specially if you want them blasting constantly. The less HZ setting the more bass so when breaking in try to go between 80hz-125hz. Going below 80hz during the break in period can melt the resin and crunch the coils. You want that resin to almost solidify pretty much.
The rms out put power on your amp was to powerful for the rms on your speaker. Just because the speaker is rated 2000 watts doesn’t mean you can hit your speaker at that continuous wattage at all times it means that it will reach 2000 watts peek at any given moment during a genre its just letting the peak power not The continuous handling power . You must qualify an amp based on Rms and ohms are you using two speakers or one The same applies to the speaker
Alright check this out brother the RMS is where the real power of the speaker is that if the speaker like someone comment is only 500 RMS and the watts is 2000 and your amplifier is only 300 to 400 or 500 RMS you will not blow it the what is not for the power of the speaker is that a lot of people in the majority of people think because it says 2,000 Watts That's How Strong that speaker is that is not true it's the RMS that's where the real power is at if you get a speaker let's equal are men or a tad or little bit lower then what the speaker RMS can handle you'll be okay you might have some issues with the amplifier heating up or forcing itself too much if the RMS are higher than the RMS of the amplifier preferably equal the RMS to the amplifier to the woofer therefore the amplifier doesn't Force itself and heat up and the Wolf fur can reach its full potential without blowing the woofer up good luck remember RMS is where the real power is at forget about how many watts it has the higher the RMS the stronger that woofer and the harder the base is and one other thing to get the best quality sound from your speaker box make sure you get a speaker box that is a solid piece of wood none of the recyclable are other cheap fake imitation wood has to be real wood and solid pieces to make the Box you would definitely here and feel the difference when you use or get a really good box good luck brother
The other real issue here is you broke the 2nd enclosure seal while feeding it more power than it's rms rating. The second enclosure was your CAR! When you crack your windows when your bass'in the air space is increased which make box internal volume larger which mean less control on speaker suspension. Thus the will get louder with the same power as with the windows up 1-3db. You blew the by not not knowing that. I'm a 10 db drag competitor, trust it's SCIENCE. NOT THE SUBS FAULT.
Great vid. But whats really sad is that the amp isnt really providing 2000 watts so that Rockville speaker blew under 2000 watts. I really like Rockville but none of their equipment is what they say it is as of audiopipe. Of course alot of the other audio suppliers dont either even the high end ones but Rockvilles stuff just seems like one of the worst.
The max is 2000. The rms is 500. People think “it says 2000 it can hold 2000” but thats kinda like saying “my car redlines at 6500 so i can drive it at 6400 all the time and be fine” always read the fine print. Rockville subs are famously fragile but I think the stigma is from noobs throwing way too much power on em.
I have 4 k9 8's on 2krms and full tilt for about a year now and they don't ever get hot they are inverted in a 4.4qb with 2 11×4" areo ports on 150ah of agm and they literally shake everything on my screw f150 they do what they claim as long as you have the amp setup right
Then you ran it wrong or needed a better box I have six 12's on two 4000 have to run them on rms rating not saying you don't know nothing about audio only talking about what I got schooled on their not that loud but hell of solid
first issue is it’s in a prius.
It says right on the box 500 watts the 2000 was is peek which means it can take a very short burst at 2000 watts like a second or 2 not continuous
When rookies upload audio nonsense. There's too much wrong here man, we all start off oblivious.
Lols
@shane tackett let him have his fun
Is only 500 rms if u try to put 2000 watt on tht sub u going to blow it
The sheet that comes with it says it is 1000w RMS and 500w CEA
Yep, he put too much power to it. Some people don't have car audio common sense. Any 2.5 inch voice is gonna struggle with 2000 watts. There are only maybe 4 different 8s out there that will take 1000 rms. He would've blown a Skar zvx 8 with the same power.
Tht 1000watt rms of Rockville everyone knows is garbage u got put the cea rated if not buy buy sub and u or him was sending 2k chess tht sub did and out perform a lot of subs
You clipped the hell out of a 500 watt subwoofer.......
Rockville brings a whole new meaning to Blowout sale........lol
Especially with this guy operating.
It was just a test run lol
@@eddieherrod6632 have you tried any of the Skar Audio stuff? I bought to zvx 15s and a Taramps bass 3k. Im anxious to see how it sounds in my Tahoe. Ive got some older soundstream 15s and 2 1k Crunch amps at the moment. Sounds good, just not enough for this old bass head nowadays lol.
I built a box similar to the Steve Meade design. Just gotta find time from work to install it all.
@@budddove6480 I have two 18 skar evl's and 8000 watt taramp in single boxes from skar and it sounds amazing!
ruclips.net/video/XZ8natq_2h4/видео.html
Audiopipe Amps are VERY SOLID so it's easy to blow any subwoofer with that raw power. On the other hand, if you had the HZ dial below 50 on any 8" subwoofer you get to see what it's made of. I think the 8" PUNISHER 3000w might be able to handle that frequency.
Actually did pretty well considering the way you ran it
Ok I got it much appreciated 👍🏿
So just so everyone knows. Your suppose to break in your subs. You have to run it at its rms watts (if its 600w rms then they have to be run at that with normal music. Not a test tone) and the break in period is 2 weeks at the very least in my opinion. Make sure your volume never goes past whatever 70% of your volumes is. So if your volume can go up to 35 then only ever run your volume at 25. Never push it. Youll notice a difference after 2 weeks and ghen you can push them but if the subwoofer is 2500watts max then dont ever go past 1800watts. Specially if you want them blasting constantly. The less HZ setting the more bass so when breaking in try to go between 80hz-125hz. Going below 80hz during the break in period can melt the resin and crunch the coils. You want that resin to almost solidify pretty much.
I just bought their 10 inch tube woofer that's 500 watts... It is awesome.. You might have a little bit too many watts... 😆 pretty funny though
It was just a pre run test 😂
Clipping so bad
Hot Memphis Music artist and cars yep, big time
The little 8 was beatin for real
The rms out put power on your amp was to powerful for the rms on your speaker.
Just because the speaker is rated 2000 watts doesn’t mean you can hit your speaker at that continuous wattage at all times it means that it will reach 2000 watts peek at any given moment during a genre its just letting the peak power not The continuous handling power .
You must qualify an amp based on Rms and ohms are you using two speakers or one
The same applies to the speaker
I like the songs u pick
Alright check this out brother the RMS is where the real power of the speaker is that if the speaker like someone comment is only 500 RMS and the watts is 2000 and your amplifier is only 300 to 400 or 500 RMS you will not blow it the what is not for the power of the speaker is that a lot of people in the majority of people think because it says 2,000 Watts That's How Strong that speaker is that is not true it's the RMS that's where the real power is at if you get a speaker let's equal are men or a tad or little bit lower then what the speaker RMS can handle you'll be okay you might have some issues with the amplifier heating up or forcing itself too much if the RMS are higher than the RMS of the amplifier preferably equal the RMS to the amplifier to the woofer therefore the amplifier doesn't Force itself and heat up and the Wolf fur can reach its full potential without blowing the woofer up good luck remember RMS is where the real power is at forget about how many watts it has the higher the RMS the stronger that woofer and the harder the base is and one other thing to get the best quality sound from your speaker box make sure you get a speaker box that is a solid piece of wood none of the recyclable are other cheap fake imitation wood has to be real wood and solid pieces to make the Box you would definitely here and feel the difference when you use or get a really good box good luck brother
The other real issue here is you broke the 2nd enclosure seal while feeding it more power than it's rms rating. The second enclosure was your CAR! When you crack your windows when your bass'in the air space is increased which make box internal volume larger which mean less control on speaker suspension. Thus the will get louder with the same power as with the windows up 1-3db. You blew the by not not knowing that. I'm a 10 db drag competitor, trust it's SCIENCE. NOT THE SUBS FAULT.
Great vid. But whats really sad is that the amp isnt really providing 2000 watts so that Rockville speaker blew under 2000 watts. I really like Rockville but none of their equipment is what they say it is as of audiopipe. Of course alot of the other audio suppliers dont either even the high end ones but Rockvilles stuff just seems like one of the worst.
The max is 2000. The rms is 500. People think “it says 2000 it can hold 2000” but thats kinda like saying “my car redlines at 6500 so i can drive it at 6400 all the time and be fine” always read the fine print. Rockville subs are famously fragile but I think the stigma is from noobs throwing way too much power on em.
I can hear 👂 it bottoming out... before you turn it up 🤷
no wonder you fried the sub...you clipped the fuck out that sub. And the amp...omg cmon bro get a real amp
Bro it's 500rms I got 4 on 1000w pure and they bump hard!!!!!
I have 4 k9 8's on 2krms and full tilt for about a year now and they don't ever get hot they are inverted in a 4.4qb with 2 11×4" areo ports on 150ah of agm and they literally shake everything on my screw f150 they do what they claim as long as you have the amp setup right
@@yamariderAllen I just got 2 10” k9 what box do you recommend to go in a 4 door vehicle ?
A Prius bruhh😂
I like your beats
Greatly appreciated!
Bro that sub is 1000 watts rms.. of course u gunna blow it throwing a 1500 watt amp on it full power
@@eddieherrod6632 lol. I actually like those subs .. for the price they are hard to beat.. I have 4 8s going on 3 years now and they impress
@@eddieherrod6632 ya I had my box built for em.. went cheap on the subs but alot on the box and they've sounded great 4 years so far
@@eddieherrod6632 I've got 4 8s pushing 2000rms
Damn what song is this?
Eddie how can I get that song you playing get off me
Nice but I don't like Rockville. They have a horrible reputation.
Was this the breakin or had it already been broken in before you tested its max?
Been playing it for couple months I just wanted to see what it could take lol
Who is the guys that's singing this rap song cause we can not find the name of the song u gave us
Is that an acid battery for you secondary?
Haha yup 😂
Music ??
Lol this is what happens if you don't slowly break in your sub before you bump it
Clipping kills the woofer someone save a good woofer.
Yes I know this was a test
2000 is not the RMS you now that right
Is always half at 1000 RMS for content power.
It didn't matter it's was just a test
Check out the Ri audio 8s subwoofers they $59 and better than that.
Nice
Ur lucky tht sub hasn’t burned pushing it to the max thts max and rms 2 different things
I have the same car. How did you run wires from the battery to the inside????
not even blown the right way
Just change the title of the video to this is what happens when you run 1000 rms with shit settings to 500 rms subwoofer. It go boom
It was all about testing the subwoofer to see how long it would take it
I still think rockvill is better then mtx I’ve blown so many mtx subs
Mtx is a well known brand but doesn't have the bang for the buck 😂
@@eddieherrod6632 then again I had a lot of older mtx subwoofers I'm sure there better quality now
What’s the name of the song?
Bro which song is this
Where you get the sub box
Amazon
Sub Need bigger breathing ports
This man setup is lethal… Another audio noob uploading nonsense to YT
Instead of commenting negatively why don't you check out the channel before you judge
@Eddie Herrod we've got so many people trolling our vids it's ridiculous.
That is a 6.5. It's too small to be an 8.
What's the rms on the sub?
Joe P like 350
800
800 rms
500 rms
What's the name of that song
The name of the song is called get off me.
i give the install an F
Iwantfreestuff
Fake😂😂😂😂
Bruh 🤦🏽♂️ your only running an 8inch should of bought 12 inches
Here is one thing don’t buy Rockville I had one and it blew under power it’s just a bad company
Then you ran it wrong or needed a better box I have six 12's on two 4000 have to run them on rms rating not saying you don't know nothing about audio only talking about what I got schooled on their not that loud but hell of solid
So true!
I used rockville and its alright for the price its better than kickers cvr and half the price
Clipping so bad