hahahaaa loading the shirt the other way is a screen printer thing. i cant line shit up that way. hahahahahaaaaaa my transfers would be all messed up hahaha
Oh yah. I have two presses and neither are threadable. For myself, I can only see doing this on a threadable press if I had front and back hits that I wanted to protect. Like puff vinyl or transfers.
As someone who's getting started in the tee biz, I enjoy and appreciate the thoroughness and realness of your videos! THANK YOU for taking the time to help others out! ✌🏼❤
I use supacolor transfers all the time. I use medium-heavy pressure at 320 for 15secs. I then have to allow the transfers to cool off, then the cover sheet will peel off with no issues. Then follow it with another 15sec press
I’ve always done hot peel, but lately my transfer sticks no matter what settings I press on. I finally discovered it only comes off clean if put pressure on the transfer with my hand and cold peel. Love how the transfers look when they come off clean, but they’re just inconsistent for me, and I’ve spent a lot of money with them. Currently looking for a new transfer source.
Excellent info bro. I’ve been struggling with Supacolor transfers like crazy..same issues everyone else had but watching your tips has changed everything. I found the correct settings for my press and used your one quick pull method followed by the second press to lock it in. Works everytime. Washed it numerous times without issue. Good content bro. You’re providing a lot value with your channel. Thanks
I followed your instructions to the T and the transfers came out perfect! I had the problems you mentioned before and I’m thankful I found your video that has solved those issues. Thank you!
Thank you sooo much for this video! Getting my first order of custom design transfers for my first tshirt and you have taken away any nervousness I had with executing the process! Thank you!!!
Also I used your method of how to center the transfer onto 2 hoodies for my first time and both designs came out perfect, thank you. I’m just still figuring out what pressure and temperature will work best for a gildan hoodie
I ordered from supacolor twice and twice I had issues with the peeling and I too ruined a few shirts. I used max pressure and even raised the heat way up and beyond to make the transfer adhere to the shirt. I was pressing up to 5-6 times with issues. After watching your video it makes me feel a little more confident to give it another try. I have the HPN Signature series 16x20 auto-open slideout draw. I think Supacolor does great transfers. Thank you once again for always sharing your knowledge. I hope this time around it'll work for me.
orders some samples and mess with those before placing the next order. try to nail down the technique with the samples. so when you get your order in, you'll be knockin them shits out. its mostly in the release and peel. not too fast and aggressive but also not too slow and gentle. i favor pulling close to the bottom platen instead of pulling and peeling up. grab the corner and peel low and quick
Hey Brandon how detailed can those transfers be . I have a designs with smoke in it but I don’t know how it would look on a transfer please let me know
Good shit Braddah! I was having difficulty with my first Supacolor order, but I’m good now cause of you and I appreciate it! Question, what do you use to hold up your teflon sheet? Mahalo 🤙🏽
Brandoh how do you deal with glue residue surrounding the prints? Do you just accept thats part of using DTF transfers? Ive used some goof proof transfers and there wasnt any residue.
Gradients look smooth n dope! The teflon sheet on top platen has no influence on the temperature? Thanks for sharing again! Always learn something on your channel 👍🏾👍🏾
Great work Brandon, I love the idea of attaching the Teflon. I was told not to use Teflon when using transfers so I only use it for vinyl. Can it should it be used at all times? What size teflon
Can you recommend a transfer that is similar to goof-proof but is full color? I tried the ultra color soft from Transfer Express but don't like the feel of it; seems like vinyl almost. Thank You for all the knowledge bro.
just with supa. has to do with the backing paper its printed on. it creates some weird static energy in here. when i press supa tramsfers at home. no teflon needed
Yo Brandoh! Thank you! I just got my first order from SUPA. It looks like your post press is eight seconds as opposed to the recommended 2-4 seconds. Can you confirm you do an 8 second post press? Again, thank you
my post press is all based on feel. no set time. some times its 3 secs and some times its a full 15 secs hahahaa. some times its any where in between. test out some settings and see what works best for you and your press
good question. temp can stay the same as long as the material in shirt and hoodie is the same. example. shirt is 100% cotton, hoodie is 100% cotton. temp can stay the same, just adjust the pressure. but if material is not the same you would have to make minor adjustments to the temp. if hoodie is blended with cotton and polyester i would go down in temp a little at a time till you get the results you want.
if they only want 1 shirt with a picture on it ,who do you go off of ?or do you only take orders of more than 1 ?Im asking because doesnt supacolor sell by the packs ?
drifit is different. anything with polyester in it will need to be adjusted for that material. polyester reacts differently than cotton under heat. also anything with spandex, lycra or elastic in it too. i suggest testing out different settings on the shirts you wanna use to make sure you get the best application possible
I have a question for you and you do not have to answer, fully understood, but HPN has had delay after delay on the high end signature series. I am under the belief that these are made overseas somewhere and that is the cause for slowdown. Would you know? I am trying....so trying not to look at more available other models, especially for doing strong AND even sublimation prints, because HPN is really behind the game. Also, would be willing to do a video/demo from beginning to end on sublimation with your heat press? You had said that you can sublimate with it, but I was under the impression that a swing away press with straight down even pressure was THE type to get. You disagree and said that you can do it on your Signature Series model. Please, please do a full walk through for us. Thanks so much for answering and time if you are willing to do a demo. Peace!
sublimation is just like pressing transfers. i dont sublimate on shirts. only difference is sublimation takes 400+ degrees for a minute or two. technique is the same, adjust pressure and press. thats all. but swing away and clam shell presses to the same thing. its both getting heat and pressure applied. as for where the heat presses are made, i have no idea.
Thanks, brotha for the reply about the presses and sublimation are the same process= heat and firm pressure!! I guess we will see about HPN supply. They are missing out on SO much $$$, if folks go elsewhere, but...we shall see. Thanks again for your time to respond. I will keep following you on RUclips!!👍🏾👍🏾
I know this vid is old but I am noticing a white lining from the the adhesive around my black lettering. Any idea why the adhesive is causing a small white lining around the design? Supacolor said it’s from the adhesive and that I need to hit a second time. Any other suggestions? Still getting it after my second hit
yes its from the adhesive. i never notice it when i press supacolor. i press for 15 secs and then peel hot and repress with full pressure for a few secs. never have that issue.
What are your thoughts on personal tags. I keep having issues getting them to press since the collar tends to fuck with the pressure. Is it even worth adding? I see some people say yes it's the next level in making your shit legit but I see some brands that don't use them.
they're cool but not needed. all depends if you wanna offer that to your customers. out of the 5 brands i run and operate. I only press neck tags into 1 of them. the other 4 just keep the same tag in'em
If I pull the backing off fast, the edges of the design fold or crinkle. Its Supa frustrating. I have 5 different Supacolor designs & I have the same issues with all of em
What’s the deal with supacolor? I keep hearing the quality is trash the only thing that seems good about it, is that it can do so many colors. Sound like the feel of it, it’s like paper
not sure who you keep hearing that from. but i would suggest testing it out yourself and then compare it to whatever you currently use and make the decision yourself. thats what i did on my channel. compare it to other transfers, to traditional screen printing etc... i dont go based off of somebody elses experiences i go based off of my own. get me? if i were you i would test out everything and figure out what works best for you
@@BigBrandoh some dude on RUclips called goon life printing and embroidery, I do get you on me trying the product for my self, I just wanted to know if it’s something you really stand behind
I have the same issues on multiple different Supacolor Transfers. If I pull the backing off fast, the edges of the design fold or crinkle. Its frustrating
@@bkmcg7340 after watching this video, I noticed I was peeling to slow and that’s what it was getting stuck. What I did on my craft pro heat press , I use 340 for 15 seconds and immediately peel Off like big Brandoh shows here ☝🏻peel in one Quico smooth motion and it finally worked for me . Hope that helps
Thx for the tip Big Brandoh, on the one smooth motion technique, my problem was I was going to slow on the peel off and thx to this video I was able to find the right temperature for my heat press using this technique and I’m good to go now ... Even though I took a lost on 4 shirts and designs, I am just relieved It finally worked for me 🙌🏻trial and error, no giving up ..
who's truth? your truth? you gotta remember what you feel is cheap might not be what someone else thinks is cheap. do you feel you are the standard when it comes to how something should look or feel? But lets discuss, what do you consider high quality multi color print? lets say 10 color print with gradients. what is your preferred print method? if you wanna help the people, lets help the people
so satisfying seeing you lay the shirt facing you!! instead of upside down. i dont see how ppl can line up things that way lol
Right? 😂😂
hahahaaa loading the shirt the other way is a screen printer thing. i cant line shit up that way. hahahahahaaaaaa my transfers would be all messed up hahaha
Lol same here.
@Bigbrandoh appreciate all the info you've been posting older bro. I'm using BC Tri-Blend - any tips on the temp, pressure, and time for those?
Oh yah. I have two presses and neither are threadable. For myself, I can only see doing this on a threadable press if I had front and back hits that I wanted to protect. Like puff vinyl or transfers.
As someone who's getting started in the tee biz, I enjoy and appreciate the thoroughness and realness of your videos! THANK YOU for taking the time to help others out! ✌🏼❤
Brandoh is amazing 💯
I use supacolor transfers all the time. I use medium-heavy pressure at 320 for 15secs. I then have to allow the transfers to cool off, then the cover sheet will peel off with no issues. Then follow it with another 15sec press
woah. never heard anybody say they peel it cold. but if it works for you. all good. thats all that matters
We recommend a hot peel always! 💪
I’ve always done hot peel, but lately my transfer sticks no matter what settings I press on. I finally discovered it only comes off clean if put pressure on the transfer with my hand and cold peel. Love how the transfers look when they come off clean, but they’re just inconsistent for me, and I’ve spent a lot of money with them. Currently looking for a new transfer source.
Brandoh is always on time with the business. No BS just straight up game. We appreciate you homie.
yooooo E i appreciate you bro!!! 💯👊🏾💯
Always 🔥🗝 key knowledge from our #Supafam Brandoh 💯
looking smooth bro i strugglled all day with a crickit hand press because i didnt know if id like it but im sold thanks for the info
Excellent info bro. I’ve been struggling with Supacolor transfers like crazy..same issues everyone else had but watching your tips has changed everything. I found the correct settings for my press and used your one quick pull method followed by the second press to lock it in. Works everytime. Washed it numerous times without issue. Good content bro. You’re providing a lot value with your channel. Thanks
This what I'm pressing this week. Some samples from a Supacolor sample pack
Hope you love your samples!
There it is!! Good to see you doing some demo pressing again my man. Thanks a bunch.
I followed your instructions to the T and the transfers came out perfect!
I had the problems you mentioned before and I’m thankful I found your video that has solved those issues. Thank you!
nice! get that money!!!! thanks for watchin!!
We love to see it...
Those transfers look clean! Wow I’m surprised!
Supaclean
I Use your same process, never fails! 👏
if it aint broke dont fix it. hahahaa
@@BigBrandoh word! 🙏
Thank you. We appreciate you
thanks for watchin
Thank you sooo much for this video! Getting my first order of custom design transfers for my first tshirt and you have taken away any nervousness I had with executing the process! Thank you!!!
u r the mvp
hahaha i appreciate that! thanks tor watchin
Official video mi gente, lot of video hating on Supacolor, throwing shade, but I see now, they was not using the product correctly
Also I used your method of how to center the transfer onto 2 hoodies for my first time and both designs came out perfect, thank you. I’m just still figuring out what pressure and temperature will work best for a gildan hoodie
I bought two and had to wait 3 months but I got them now
Another good video my brotha very informative 🤙🏾🙏🏾
I ordered from supacolor twice and twice I had issues with the peeling and I too ruined a few shirts. I used max pressure and even raised the heat way up and beyond to make the transfer adhere to the shirt. I was pressing up to 5-6 times with issues. After watching your video it makes me feel a little more confident to give it another try. I have the HPN Signature series 16x20 auto-open slideout draw. I think Supacolor does great transfers. Thank you once again for always sharing your knowledge. I hope this time around it'll work for me.
orders some samples and mess with those before placing the next order. try to nail down the technique with the samples. so when you get your order in, you'll be knockin them shits out. its mostly in the release and peel. not too fast and aggressive but also not too slow and gentle. i favor pulling close to the bottom platen instead of pulling and peeling up. grab the corner and peel low and quick
@@BigBrandoh Thank you, Bro! I'll do that.
You can also always reach out to us for help with pressing/peeling troubleshooting.
@@Supacolor how do I make a 22x72 gangsheet
@@beastofthewest3713 sorry fam! Our max print space is 11.7x16.5
Thank you for making the video. One question. Is this the wearable transfer?
yes wearable transfers
Thanks Prof. Brandoh!
I love your videos! Always helpful!!
Thanks for the info
Appreciate the help you give.
Hey Brandon how detailed can those transfers be . I have a designs with smoke in it but I don’t know how it would look on a transfer please let me know
Hello! Review our art specs here:
supacolor.com/resources/artwork-requirements/
Great content Brandoh! Keep up the good work, love seeing the videos where you press the shirts
Teflon for static buffer
Heavy pressure 💪
Smooth one motion peel up
Nice design for cyclists
locked in. thats all it is. and i cant take credit for the design. dude who created that one is dope tho. thanks for the continued support
Could I use parchment paper instead of teflon sheet?
Good shit Braddah! I was having difficulty with my first Supacolor order, but I’m good now cause of you and I appreciate it! Question, what do you use to hold up your teflon sheet? Mahalo 🤙🏽
i use refrigerator magnet clips off amazon
How far would you say you go down when pressing the image on the back of the shirts and is it the same when you do adults and youth sizes?
Brandoh how do you deal with glue residue surrounding the prints? Do you just accept thats part of using DTF transfers? Ive used some goof proof transfers and there wasnt any residue.
Gradients look smooth n dope! The teflon sheet on top platen has no influence on the temperature? Thanks for sharing again! Always learn something on your channel 👍🏾👍🏾
i feel it does mess with the temp so i bump my temp up 1 degree. and press for 1 sec longer
Can you add multiple designs on one sheet of supacolor?
How do you avoid the square heat press marks on garments?? Help xx
this vid helped me a lot! thanks big bro
Thank you B
Roughly 36 total press time, do you experience any scorch marks?
Thank you for this video !
What black blank shirt are you wearing? That fit looks dope!
alstyle
Brandoh always dropping heat!🔥🔥🔥🔥🔥
Thanks for the tutorial, this helped me a lot bro!
Thanks for the videos bro . Appreciate you and the knowledge .
Awesome bro thanks
Great work Brandon,
I love the idea of attaching the Teflon. I was told not to use Teflon when using transfers so I only use it for vinyl.
Can it should it be used at all times? What size teflon
Can you recommend a transfer that is similar to goof-proof but is full color? I tried the ultra color soft from Transfer Express but don't like the feel of it; seems like vinyl almost. Thank You for all the knowledge bro.
i use supacolor for all my multi color needs. they dont offer gang sheets tho.
Your logo is so cool! :)
Do u always use the Teflon sheet or is it only with super color? Big brandoh salute 💯
just with supa. has to do with the backing paper its printed on. it creates some weird static energy in here. when i press supa tramsfers at home. no teflon needed
Hello, what was the size of the graphic on the back of the shirt?
Yo Brandoh! Thank you! I just got my first order from SUPA. It looks like your post press is eight seconds as opposed to the recommended 2-4 seconds. Can you confirm you do an 8 second post press? Again, thank you
my post press is all based on feel. no set time. some times its 3 secs and some times its a full 15 secs hahahaa. some times its any where in between. test out some settings and see what works best for you and your press
@Big Brandoh thank you Brandoh, I just got my first sheets comped from supracolor: SUPA EASY and excited. I told them Big Brandoh sent me!
Do you use Teflon sheet for all transfers not just supacolor?
What size us your press? And any advice on what size to get and why?
check out my playlist "back to basics" i go over everything and break it all down for you.
Temperature does matter depending on what you are printing on right? Or can you use the same temperature for both hoodies and t shirts?
good question. temp can stay the same as long as the material in shirt and hoodie is the same. example. shirt is 100% cotton, hoodie is 100% cotton. temp can stay the same, just adjust the pressure. but if material is not the same you would have to make minor adjustments to the temp. if hoodie is blended with cotton and polyester i would go down in temp a little at a time till you get the results you want.
I like the new setup 🔥
if they only want 1 shirt with a picture on it ,who do you go off of ?or do you only take orders of more than 1 ?Im asking because doesnt supacolor sell by the packs ?
I absolutely love your videos. ❤
Do you print them from home or you need to order them with your design.
no. you order them from Supacolor. you send them your designs, they send you the transfers
Can you mount the pressure sensor yourself?
Quick question, what printer are you using to print onto the paper. Getting recommendations between the HP injet and Brother inketjet
He’s using dtfs from a website called supacolor
Does this go for drifit shirts as well? Or is there a certain heat and pressure for drifit garments?
drifit is different. anything with polyester in it will need to be adjusted for that material. polyester reacts differently than cotton under heat. also anything with spandex, lycra or elastic in it too. i suggest testing out different settings on the shirts you wanna use to make sure you get the best application possible
@@BigBrandoh thank you will do
What's the shirt you are wearing and pressed on?
alstyle
I have a question for you and you do not have to answer, fully understood, but HPN has had delay after delay on the high end signature series. I am under the belief that these are made overseas somewhere and that is the cause for slowdown. Would you know? I am trying....so trying not to look at more available other models, especially for doing strong AND even sublimation prints, because HPN is really behind the game. Also, would be willing to do a video/demo from beginning to end on sublimation with your heat press? You had said that you can sublimate with it, but I was under the impression that a swing away press with straight down even pressure was THE type to get. You disagree and said that you can do it on your Signature Series model. Please, please do a full walk through for us. Thanks so much for answering and time if you are willing to do a demo. Peace!
sublimation is just like pressing transfers. i dont sublimate on shirts. only difference is sublimation takes 400+ degrees for a minute or two. technique is the same, adjust pressure and press. thats all. but swing away and clam shell presses to the same thing. its both getting heat and pressure applied. as for where the heat presses are made, i have no idea.
Thanks, brotha for the reply about the presses and sublimation are the same process= heat and firm pressure!! I guess we will see about HPN supply. They are missing out on SO much $$$, if folks go elsewhere, but...we shall see. Thanks again for your time to respond. I will keep following you on RUclips!!👍🏾👍🏾
Good stuff.
What size is that back sheet transfer? How far down do you position the back print?
dont remember 11.5 wide i think. whatever that size is.
@@BigBrandoh good looks! Do you have a vid on how you place your back prints? Like how from the collar
I know this vid is old but I am noticing a white lining from the the adhesive around my black lettering. Any idea why the adhesive is causing a small white lining around the design? Supacolor said it’s from the adhesive and that I need to hit a second time. Any other suggestions? Still getting it after my second hit
yes its from the adhesive. i never notice it when i press supacolor. i press for 15 secs and then peel hot and repress with full pressure for a few secs. never have that issue.
@@BigBrandoh Hey Brandon after I wash my 75% cotton sweater shrunk. And dtf became wrinkly. How do you counter this?
What size is the back logo? Having trouble
dont remember. its around 11.5 wide
What are your thoughts on personal tags. I keep having issues getting them to press since the collar tends to fuck with the pressure. Is it even worth adding? I see some people say yes it's the next level in making your shit legit but I see some brands that don't use them.
they're cool but not needed. all depends if you wanna offer that to your customers. out of the 5 brands i run and operate. I only press neck tags into 1 of them. the other 4 just keep the same tag in'em
I saw a vid where someone used a mousepad under the shirt to raise that area and press it
Appreciate the guide! Really needed this
Is supacolor available/ ship in india?
Curious what size the back graphic was
how do you deal with burn marks from the platen?
i got videos on my channel about that. check it out
@@BigBrandoh I have no idea how I didn't see that video when I was scrolling through your channel. Thank you!
What if I maxed out my pressure but it still won’t come off unless I wait for it to cool down?
i have no idea. hahaha i can only show what works for me and how i press it. if lettin it cool works for you, cool. ive only peeled it hot.
Review our most recent video on troubleshooting your heat press! We recommend hot peeling Supacolor transfers.
Hey Big B whats good! What number are you dialed in on the sure pressure setting? I have a HPN Pro as well.
50
Do the pressure knob have the numbers on it already. I'm buying this exact press this weekend.
Where do you get your Teflon sheet ?
amazon. you can also get'em from heat press nation too
Do they deliver in Pakistan?
Gems as usual 💜💜💜!
Bro you lookin' slim! Great content!
i need these gyms to open back up so i can get my shirts to fit like Stan Banks Shirts. i need that muscle man look hahahahahaaaa
@@BigBrandoh just wear them snug like he does JK lol. I lost 13, been keeping it off just eating right. No more beer either :(
hahaha no more beer? i couldnt do it hahahahaaaaaa
@@BigBrandoh I'll drink again one day. Drink one for me. ♡
If I pull the backing off fast, the edges of the design fold or crinkle. Its Supa frustrating. I have 5 different Supacolor designs & I have the same issues with all of em
try pulling closer to the bottom platen instead of pulling up. if that makes sense
Check out our most recent video on troubleshooting pressing/peeling
What’s the deal with supacolor? I keep hearing the quality is trash the only thing that seems good about it, is that it can do so many colors. Sound like the feel of it, it’s like paper
not sure who you keep hearing that from. but i would suggest testing it out yourself and then compare it to whatever you currently use and make the decision yourself. thats what i did on my channel. compare it to other transfers, to traditional screen printing etc... i dont go based off of somebody elses experiences i go based off of my own. get me? if i were you i would test out everything and figure out what works best for you
@@BigBrandoh some dude on RUclips called goon life printing and embroidery, I do get you on me trying the product for my self, I just wanted to know if it’s something you really stand behind
thx
I see you press the second time with no protective sheet. Why is that? Im afraid of sticking problems
the sheet is attached to the top of my press. that brown paper is a teflon sheet.
@@BigBrandoh damn i even peep that. How you get it to stick/stay?
PRESSIN IRON? YOU GETTIN SWOL BRO.
What’s up Big Head Brandoh 👊🏾👊🏾 All good my melon bigger than yours 🤣🤣 Thanks for showing us game.
yoooo thanks for watchin 👊🏾💯👊🏾
@@BigBrandoh My Man!!
🔥🔥🔥
pull that shit lol
😂😂😂
I stay learning from u g. Lol 😂
hahaa 💪🏾 thats right!!! get that money homie
My transfers not stick to the shirt smh. 2 shirts and 2 transfers wasted
I have the same issues on multiple different Supacolor Transfers. If I pull the backing off fast, the edges of the design fold or crinkle. Its frustrating
@@bkmcg7340 after watching this video, I noticed I was peeling to slow and that’s what it was getting stuck. What I did on my craft pro heat press , I use 340 for 15 seconds and immediately peel
Off like big Brandoh shows here ☝🏻peel in one Quico smooth motion and it finally worked for me . Hope that helps
Thx for the tip Big Brandoh, on the one smooth motion technique, my problem was I was going to slow on the peel off and thx to this video I was able to find the right temperature for my heat press using this technique and I’m good to go now ... Even though I took a lost on 4 shirts and designs, I am just relieved It finally worked for me 🙌🏻trial and error, no giving up ..
🙏🏽 What’s your ethnicity?
Damn gee.. you hit that back press like nothing.. 🤦.. I was hoping you were going to give me a finger count 😂😂
Here to tell the truth. This stuff feels and looks cheap
who's truth? your truth? you gotta remember what you feel is cheap might not be what someone else thinks is cheap. do you feel you are the standard when it comes to how something should look or feel? But lets discuss, what do you consider high quality multi color print? lets say 10 color print with gradients. what is your preferred print method? if you wanna help the people, lets help the people