2014 Chevy SS - Kooks Long Tube Headers Install
HTML-код
- Опубликовано: 24 авг 2024
- In this video I install a set of 1 7/8" Long Tube Headers from Kooks.
These headers are stainless - and bolted right in.
Parts used:
Kooks Long Tube Headers - amzn.to/2rWD4Hr
ARP LS Exhaust Manifold Bolts - amzn.to/2rWAYrm
Thanks everyone for all of your support!
Send me stuff!
Craig BonecrrusherSS
PO BOX 63
Denver, NC 28037
Help support the channel by checking out the store:
www.bonecrrushe...
Follow me on Instagram: / bonecrrusherss
Follow me on Twitter: / bonecrrusherss
Like me on Facebook: / bonecrrusherss
Music Provided by: Jeff Kaale
Jeff Kaale - Secret Sauce
/ jeff-kaale
This is the best header install I have ever seen. I really appreciate that you referenced all of the parts, right down to the APR bolts and torque values. While it would have been helpful to see at least one view from the bottom, it was still useful. Thanks a lot for posting!
No problem!
just got mine in today for the goat, 950ish just for the headers, they went up to just below 1,300 the next day. But less than 600... wow I’m jealous.
Yeah it was a Black Friday special - and I'm glad I bought them when I could.
Didn't know they sold headers on amazon. I'll have to keep my eye out around Black Friday this year.
Is maverick man carbon the company he’s talking about in the beginning?
Nope - scroll down the comments to find out
So, the Headers are initially torqued to 11-ft lb followed by 15-ft lb. - got it!
Daniel - I have been using this guide for years:
www.corvetteforum.com/forums/attachments/c6-corvette-general-discussion/47711269d1355420686-c6-bolt-torque-specs-need-pdf-c6-torque.pdf
All of the engine stuff will work - all LS3's are the same.
Just get some Xforce headers/ catback. 1 7/8 primaries 304 stainless, thick flanges, beautiful welds, 3" full cat back....and adjustable mufflers. You don't have do half that shit to install the headers. Both sides just slid right in. Didnt even need to remove CAI intake, and sterring shaft. The only things I had to remove to get access is the plugs, wires, and remove oil dipstick.
Xforce engine back exhaust is probably the best sounding exhaust on the market. Look them up.
$1500 for a cat back? Ouch.... I've had Kooks/Corsa on 3 cars now - and its a combo that I'm going to stick with.
The more competition the better though - hopefully drives everyones prices down and saving customers some $$.
Do not forget that after install of the headers, once you have driven the car for say 1,500Km you will need to tighten the header bolts ? Due to the heat they tend to loosen up a little not all of them, but to be sure i would check them after driving it and once the car cools down check the torque of the header bolts ?
I have the same headers/bolts/gaskets on my Corvette - and none of them backed out.
Like I mentioned in the other comment - just finished a 2000 mile road trip with no issues.
Thanks
Nice how to video
Did you bolt the headers straight up to the stock exhaust?
I had to use the G8 Corsa connectors. They are 3" short and either need a cat to make up the difference - or some exhaust pipe.
I welded in a set of high flow cats here: ruclips.net/video/YFVuupXVIQM/видео.html
Good information
Thanks
Hope it helps!
Did you use anything to protect the plug wires after you put the headers on?
No - just the stock GM wires, and the stock metal shroud pieces - if that makes sense. The metal piece that is tubular and is already on the stock wires.
@@bonecrrusherSS one last question, did you take off the steering shaft to give yourself more room?
Yes - take the bolt out and gives extra room.
@@bonecrrusherSS do you have any issues with the passenger cat vibrating off that heat shield bolt under the car? Occasionally I have that happen
I am planning to buy kooks headers 3 inch and 3 inch xforce varex catback for my caprice and I am afraid that kooks headers will not fit with xforce catback so could you help me is it gonna be a bolt on or will I need to do some changes like weild etc,,?
Hassan I don't know how the Xforce connects to the headers. I'm not sure if the Kooks/ARH/Stainless Works connect in different spots.
What o2 sensor extension harness did you go with and where did you purchase them And the corsa connection pipes for the g8 bolted up without issue with the ss headers? Been looking for a system to bolt up to my corsa catback and your video is putting me in the right direction.
Fronts don't need extension harness - back o2s don't need them either. You have to pull the harness from the back of the head and that should give you the length that you need to connect to post cats.
The G8 Kooks to Corsa pipes fit - but are 3" short.
I used a set of high flow cats to make up the difference.
@@bonecrrusherSS thanks. I bought the connection pipes with cats on .
What did you do about the x pipe? U can’t install these direct without it correct? I want to do what u did, buy them on cyber Monday
Ordered G8 Kooks to Corsa pipes from Kooks. Cut them apart and added high flow cats to make up the difference.
I love the rims
407ForRent I had them on my G8 before I traded it in on my SS.
ARP all the way,
Stage 8's broke on me twice now.
did you have any problems with the oil dipstick
No - I removed the dipstick from the block - installed the header - then reinstalled the dipstick.
Pull up on it and it will pop out of the block.
Sorry if you mentioned in the video, but how long did the install take you?
I did my headers as part of the supercharger swap - so I had the car torn down and apart when I installed them.
The headers probably will take 4-6 hours depending on tools/lift vs on the ground/mechanical skills.
Hardest part is getting the front 02 sensors disconnected from the back of the cylinder head.
Hey bud did you hook up you headers to the stock H pipe? Or did you get an x pipe?
Francisco - I bought the Kooks G8 to Corsa J pipes.
I modified them by adding a set of cats. They are about 3" short - so I made up that difference with the cats.
That video is here: ruclips.net/user/edit?o=U&video_id=YFVuupXVIQM
Is there any reason these headers wouldn't fit a 2017 model?
Cody - should be no reason.
The SS didn't change anything exhaust wise from the manifolds to the mufflers.
They just changed to the Bi-Modal mufflers with the valves in them in 2016+.
bonecrrusherSS that's what I thought. I'm just trying to figure out why the same headers for my 17 are listed on amazon at 200 bucks more with a different P/N
Hmmm - that's weird.
Call Kooks and double check.
Cody Jencks i have those in my 2017
Do you have the stock mid pipe bolted to these headers?
No - I cut a set of Kooks G8 J Pipes up - added some cats - and this made up my midpipe so that I could connect to my Corsa catback.
Here is the video covering that:
ruclips.net/video/YFVuupXVIQM/видео.html
Kooks headers or xforce??
Kooks is local too me - and if I have any issues I won't have to wait for parts from Australia.
Do they change color?
All stainless headers will change color.
Does adding headers add horsepower?
Engines are big air pumps - the faster you can get air in and out of them - the more power you can make!
Lee Greene yes
Which hoist is that?
Danmar Maxjax lift.
Awesome.
Cough Cough Marrylandspeed...
No comment.... LOL....
I've had dealings with them before, they just so happened to finally get my order into shipping as I was on the phone to cancel it.
I have been fighting with them for 6 weeks for my kooks X pipe. I will never use Maryland speed again!
Why not go with the ARH?
I wonder if they will fit my 2017?
Fucking Marylandspeed.
Are you able to reuse the factory cats with these?
No - Kooks high flow cats - or custom like I did.
Do those fit the g8?
407ForRent wheels or headers?
bonecrrusherSS headers
407ForRent Kooks sells headers for the G8.
SS are different due to oil cooler.
I wonder if the SS headers would fit the G8? I have both
407ForRent if you used the SS headers, and full Kooks exhaust system it would prob work.
I had to fab the connector pipes from the SS headers to G8 Corsa catback.
Why do you guys play that gay ass music on these videos ?
Juan Torres
Are you homophobic because you’re in the “closet?”