Chevy Colorado 2.9 Rough Idle Issue Solved
HTML-код
- Опубликовано: 9 авг 2020
- howdy viewers and welcome back, today we will be working on a 2009 Chevy Colorado with the 2.9 engine that has a rough idle and runs very poorly at low rpm as well, hope this video helps some people out because this seems to be a tough issue that alot of people have struggled with according to what i have seen on the internet, thanks for watching
Авто/Мото
Wow. I searched high & low for the cause of my issue, which is basically word-for-word what you described in the video after our Colorado left my son almost stranded one evening (he limped it home a little at a time). I checked the intake bolts and 4 of them were loose. Went ahead and pulled it to install a new gasket set. Runs smooth and quiet as can be now. Thanks for posting this video man.
Your very welcome, glad I could help!!!
Yes same here I was starting to think it jumped time cause I threw parts at this thing like my ex threw my cloths and belongings out the door ,
It started out with a plan but quickly became out of control , you would have thought she had a screw loose the way she blew a gasket ? Well I hope this is the fix I can’t afford to give away too many more houses
Mine has been getting worse for a couple of years. Yesterday I didn't think I was gonna get home. The difference is that during cool weather mine runs fine. When the ambient goes above 65 or so it shows every symptom mentioned here.
Thank you very much! You saved my hundreds of dollars and munchies of guessing working.
Awesome!!!! Glad I could help, thanks for watching!!!
Thanks so much for overview of this. I'd like to see you do the whole job because I too have a 07 colorado that needs a new gasket but I really want to find an aluminum or metal intake manifold
Your very welcome, idk if anyone makes an after market intake for that or not, the intake is usually fine just for some reason the bolts back out
Yeah ive been dealing with the intermittent p0171 code, i can hear the vacuum leaking near the back of the intake manifold towards the firewall. From what i understand the starter is under the manifold, so i imagine when it was last replaced the manifold was poorly reinstalled, im going to remove the manifold and check the gasket as you did here and ill get back to you 👍
Yeah that starter job is a pain!!
Mine did the exact same . I was able to tighten those three bolts without removing anything. Hope it keeps
It should, I like to replace the gasket just to make sure but I understand that it's a pain to remove the intake so that should work
I have the same truck and I got reduced power, code reader said it was the throttle position sensor, I’m gonna try and remove it and clean it, but mechanic said It would be a 600$ job. Resetting the battery fixes it temporarily but it just happens again. Any suggestions?
Exact same issue with 2014 malibu and a few more years, intake bolts back out and intake about falls off lol. My 2014 started running ruff all kinds of codes and a quick video showed this exact same issue.
Yup, now everytime I have one with this style intake and it has rough running issues I always grab the intake and sew how much movement there is by hand lol
Hello, my aunty has a 2010 2.9 canyon
Nd cold starts,. Man like it's choking. Sounds pre bad. But after she uses it through the day. It starts to run normal, Nd a friend suggested her head gasket
Im haveing the same issue you described. I hope the fixs the issue im haveing.
I hope so too, let me know if it does, thanks for watching
Did it work? Mine just started yesterday
@@stevengonzales4124 No. It was the VVT solenoid. But i ended up replaceing the injectors the coil packs the MAF sensor both o2 sensors body control module and cleaned the throttle body. And replaced all the gaskets
what kind of codes were you getting before you found the problem? I'm getting a p0017 and a p0300 with mine. sounds like it could be whats wrong with mine.
It had 9 codes, I can't remember them all but it had oxygen sensor codes, codes for the fuel system being too lean mainly
Im getting poo17 and po300 and po304 and po171 im having a rough idle but it runs and drive down the high way good what do y'all think it is
@@shawnlang4095 check for intake manifold leake with brake clean by spraying it around where the manifold bolts to the head, use the straw that comes with the can so you can make sure it gets down there because it's kind of hard place to reach
@@SouthernMechanic thanks for this vid. prolly a silly question but can you pls elaborate on the brake clean, am i looking for bubbles or for something else? im picturing flames and s**t ha! thanks
@@erickennedy2897 your welcome, when you have a vacuum leak and the system is sucking in extra air then it is making the system lean and if there is a vacuum leak and you spray a flammable substance and the engine sucks up the brake clean in this case then the engine will burn it just like it does the gasoline and in turn it will cause the engine to Rev up just like your opening the throttle but if there is no vacuum leak and you spray the flammable substance around the area then nothing will happen and the engine will remain at the same rpm
That fix my problem thanks
Awesome!!! Glad i could help
Would u happen to know if I changed the motor mounts can I do it with engine in still or do I have to remove it to change them ? Not sure if it's true but bad motor mounts can also cause the bad idle right ?
Sorry for not getting back to you sooner, youtube changed their stuff around and I no longer receive message notifications like I use to, bad engine mounts won't cause bad idle they will just make you feel the vibrations alot more, you can check your mounts by putting the truck in gear with the hood up and holding the brake while reving it up a little and see how much the engine moves, do this in forward and reverse, you can usually change the mounts with the engine in the truck but will most likely have to jack the engine up but I have never tried to replace the mounts on a Colorado so I'm not 100% sure, I usually install new mounts while the engine is out for other repairs or being replaced
@@SouthernMechanic awesome thanks .. also when you clean the carburetor, like I did to mine it revs higher and also since I did that it drives fine just idles high and if I let off the break and not push the gas it will go by itself and go up to almost 30mph on it's own .. it never did that until I took off the carburetor and cleaned it put it all back exactly how its supposed to and that's what it started doing ..
@@danielgallardo3929 do you mean the throttle body? Sounds like you have an air leak, check and make sure you didn't leave a hose unhooked
@@SouthernMechanic I checked everything
It idles high about 1100 rpm then when I stop at the light it drops to about 800 sometimes a lil lower
Need your advice. I have a 2009 Colorado w/ 2.9l engine. The issue I’m having is once it gets to the normal heat temperature the rpm drops and shuts down. I turn it back on and last about 10 seconds and shuts down. I already replace the crank sensor, cam sensors, throttle body, o2 sensors. And still does the same thing. Any recommendations you may have on this issue?
Check your fuel pressure, should stay around 50-60psi
I checked the fuel pressure and it is good. I have changed the throttle body , cam and crank sensor and it still looses power. Rpm drops and shuts down. When it was tested with computer the rpm’s were rise to 1000 it stays on. When rpm’s go back to a little below 500 it shuts down. No one that I have called can seem to figure what the problem is. Can you help me with some advice? Thank you in advance.
@rubena6768 I can't remember which wire but there's a wire going to the throttle body that's bad about breaking internally and to test it you look for the wire that has power for a few seconds when the key is first turned on then power goes away, if you don't get any power from it at all then the wire has a break in it and it will also cause those problems, I will try to fins which wire it is and get back with you
Thanks I will appreciate it a lot.
Sorry to bother you. Just wanted to ask if you have found out anything about the issue I have with my truck?
i just had a feeling that big black plastic ball aka manifold had something to do with it woosh glad I didn't buy fuel pump mass sensor cam sensor etc 2.9 almost temped to replace my 2.9 for a harbor freight Kohler engine and do a better job then Chevy and gmc put together. thanks for info
Lol prolly would be more reliable, glad I could help, thanks for watching
I'm going to check it now and thanks for posting this.
@@marinopacentrilli9533 your very welcome!!!
My FIXD chip tells me no compression on cylinder three.
So why no compression?
Have you actually put a manual guage on that cylinder and checked the compression?
Do you need sealant on these types of gaskets?
No sealant but a little grease is what I use once they are installed on the intake that way there's no risk of rolling a seal
@@SouthernMechanic Thank you for your reply and video.
@robertclark5752 you welcome, glad I could help!!
It’s super hard to get that thing out😊
Yes it is!!!
You can get the bolts without removing anything when I saw the tire come off that confused me why just reach
But thank you for the info on the problem
You can but when there loose I would recommend replacing the gasket but in a pinch just tightening the bolts would work I'm sure
Where is the valve u talk only