Absolutely! Same thing. But networking has a mysterious feeling to it where people get intimidated... There's nothing to be afraid of. Just go make friends.
Love the analogy of the level to perfectionism. I told my husband today at some point you have to recognize when your perfectionism actually halts progress.
my work may get really good reactions at first glance and people have offerd top end dollar, higher then expected but not many follow through. Few people can afford that kind of extra hours for the same function as a quickly done item. This video definitely made me rethink my want for creating then uncreatable heh.
Great advise. Not sure why nobody commented on this. Best advise is to under promise and over deliver. An average quality worker can still make tons of great ratings given the level of expectation set.
ya... im an idiot and had the comments turned to "needs approval before posting" lol. all fixed now tho! and very true. there are many average craftsmen who have great businesses by great customer relations and not overstating their work.
In regards tool brands you can also purchase corded versions of name brand for the similar price as a cheaper cordless brand you just have to deal with inconvenience of a cord. I recommend doing this for heavy used tools until you can upgrade because you can always use the extra power that cheaper brands might not provide.
Amazing in all these comments not one person realizes that you were one of the toughest men on the planet in your weight class in UFC/Bellator. Could have been champ if not for those horrible hand injuries. Retired at 27. You were so fun to watch fight!!
Tool brands DO matter. In the beginning I didn't have much money so I bought cheap tools like 50 euros for a hand drill machine or 60 euros for a multitool and such things. Once I had a very cheap sanding tool with a triangular sandpad on it. That one worked for exactly 2 seconds after using it for the first time (just plug it into a wall outlet, hold it above the workpiece and press the button to see if it worked). After that, the rpm dropped from 1500rpm or so to about 100rpm and it was useless. I could sand faster with my bare hands compared to the speed of that tool after it broke. Another grinding machine of 600 Watts and a 2mm thick grinding disc on it, used for cutting steel, took one hour to cut 4 pieces of metal that were 4cm long and 4mm thick. As soon as the disc hit the metal, it slowed down to a halt, even without using much pressure of the tool. It was like having a grinder with a lego motor on it, it had absolutely no power at all. After searching between my tools, I found a grinder of Bosch and that one took only a few minutes with the same disc to cut those 4 pieces. That Bosch grinder still works today after 10 years. Another jigsaw broke after using it for 5 minutes. The blade was held inside the tool with a 2mm thick aluminum plate, 3mm wide and 10mm long and it used 2 screws 2mm thick to hold that blade. After trying to cut 1 wooden board of 2cm thick, that aluminum plate broke in half and I couldn't insert any other blade ever again. Now I have a Bosch jigsaw and it still works after 6-7 years and I press much harder compared to that jigsaw that broke after 5 mins. At least 3 cheap brand tools broke on me after the first few minutes of using them. Those cheap brands were like PowerTools, PowerPlus, TopCraft and such brands. Since then, I only buy Bosch, Makita, Hitachi, Black&Decker and those tools still live after 20 years and have had a rougher time than those cheap tools that broke within minutes. I have 1 handheld drilling machine from Black&Decker and is 24 years old and still works flawlessly. No cheap tools for me again. For me, those are only good to buy and put them on display inside a dustfree cabinet or use em to cut paper but nothing more. Of course, the most expensive tools (+500 euros per tool or such figures) are a waste of money if you're starting out and you'll do fine with some cheaper tools like Bosch or Black&Decker (pricerange between 100 and 200 euros). Just don't buy brands from Aldi (like TopCraft or Duro, prices around 40-60 euros), those machines are way too cheap to do anything decent, if they work at all after using them for an hour.
6:39 I painted or varnished A LOT of interiors as a carpenter/remodeler. Why? Because I could control the end results- I could do two things by painting and finishing my own work: 1) if I did an excellent fit and finish and the painter doesn’t have an impeccable quality that day (or worse- the homeowner paints it!!) the finish obscures my good work. Good paint isn’t noticeable in specifics, but the “wow!” factor is both an emotional response (good) and an intellectual response (customer is proud of what he or she got for their money); and 2) if a few things aren’t exactly “right” - and the bigger the project the more likely you will find you had an ‘oops’ or several- a good painter (you) can recover that with some attention. But even good painters care more about themselves than they do your work whereas you care deeply about the final impressions. And you can control that result and eliminate the “why didn’t my painter fix that?!!” by finishing your work yourself.
In correct my friend I have dewalt as well as think and also Parkside I have had my Parkside for years with constant use. For less than 3\4 of the cost don't knock the cheaper brands and don't even think of buying festool
Lol. Festool tools have their place. But they are not a requirement at all. I have many Festool tools. But often people buy Festool because they think they are required for making the best product... Not the case at all. But some Festool products like an MFT, Domino, or their sanders are truly in a class of their own. But they are not required at all to do beautiful work. They just make the work a little bit faster and easier.
I'm a full time sushi chef and and thank you for honesty and time. I just picked up a impact driver and drill combo set and looking forward to building random diy stuff, mainly because one of my random dreams is to be a stay at home dad with his own wood working business. Keep in mind I have no knowledge of wood working but wth let's try it. I'm 28 with 3 kids and a shit job let's do work man
I like how you talk about setting clients expectations. They should know that this is wood we are talking about, there are going to be minor imperfections. There has been a cycle where clients expect the best and business promise the best then clients expect that because it was advertised. Business then have to one up that to get more business, then they promises more and more until they are promising perfection and their clients expect that too. It's a bad cycle and we are all so deep into it.
Well done. I started a couple months ago making keepsake boxes. So far, they look like they're put together by a 3rd grader, but I customize all of them with wood-burning, watercolors, and acrylics. Any and all info I can get on this stuff is always helpful. New subber here.
I am so glad to hear that! Running a business is a very difficult task with many unexpected turns. But it's incredibly rewarding if you can tackle them appropriately.
Hello, and first let me say thank you. I'm a woodworker who hasn't had much business sense. I typically don't view these kinds of vids, because I just don't want to sit around listening to some guy gibber-jabber. But I am impressed with your presentation. Valuable, to the point, with reasonable info, but not bla bla bla. Again. Thank you. On another note you have really encouraged me. I have great customer service skills, and just about everything you mentioned is common sense for me personally. One of my short-comings is speed and efficiency. I'll have to work that out somehow. Glad to have found your video.
Ah! Yes. That makes sense. Speed and efficiency is something that you never really stop working on in a production environment. But it is secondary to doing a great job. So it's OK if it takes you some time. You just gotta find a "system" that allows you to slowly pick up speed as you do repeat processes. Every time I do something for the first time I am really really slow... Cause I wanna do it right. If I have a job where I know I will likely never do something like it again, then I'll need to charge more money because I know I will be slow. For example I got hired to completely rebuilt a 1931 Chevy Woody car... Likely never gonna do another one. So I gotta charge more money to make it worth my time, and if the client doesn't like my bid then it's OK to let it go. But cabinets or cutting boards or refinishing are things I've done over and over again and I can do them pretty fast. I can charge a little less for those cause I know I can do them fast now. I don't need to charge less money for them... But I can if I want to. Usually I don't. Speed is usually the last piece of the puzzle to come together. It's OK to jump in head first and be slow and then work on your speed over the years as long as you are intentional about improving.
@@MaydaysCustomWoodworks Wow. Ok. I receive all that. Thank you very much. I wrestle with balancing my perfectionism with productivity. But I'm I'm again encouraged by your words. I have a 2 car garage which I share with my neighbor. I have his keys, pull out his car, then roll my bench and tools out, use, clean, roll back and repark his car in his space at end of the day. It's a lot. But I am grateful. San Francisco has very little space for Woodworking, so what I do have is a blessing.
There's a set of guidelines that I use in my painting business that you can find online, not going to say the company, not affiliated lol, but it's an association of people in the finishing trades. These guidelines make it possible to dispute a client who might have unreasonable expectations. For instance, a painted level 4 wall has to appear flawless from 6 ft away with a 60 watt light... So nitpicking Nancy who sees an off shade pinpoint on the wall can't refuse to pay you. Hope it helps!
Great video bro. Totally right I have had my own glass bus for 11 years. Started it with about $750. I had not tools and joe have a bunch. I end up buying Ryobi more time than not. The wood or job don’t care what bran cuts them. I’m my experience if your the main user and take care of them they’ll be just fine. I like Ryobi because I can get more tool for the same money, which leads to the right tools for right job. I have been blessed and take care of my customers while valuing my time.
I have a number of Ryobi tools...because they are inexpensive. Not the best tools, but they are improving. I recently bought an impact drill as I refinish my basement and I've been impressed by the quality improvement in Ryobi so far.
Thanks for taking the time to share some of your personal insights. It was helpful to me and i will incorporate this as it applies to me. Best of luck to you.
I have no experience in woodworking but I have a passion for wood and I have done a few woodwork stuff just by learning from RUclips videos, thank you so much for the information. Hope to start a small business in woodworking.
Hey man, great video! Idk y u don’t have more views, this was a great set of points that not a lot of people are making. Being a fairly skilled craftsman myself, I still found insight here. Everyone could benefit from getting your name/channel more circulation
This was great - Thankyou ! I’m on a 5yr plan to cutback my work in Aged Care and start my Upcyling/woodwork/DIY business - I’m a sponge at the moment - taking in all advice and lessons learnt from those already in the business. I don’t expect it to be easy, but I’ll be doing something I love each day - doesn’t get much better than that !! Thanks again for some great advice !!
Nice! You can get a lot done in 5 years with the right plan and work ethic. I hear you. There's some parts of running my own business that are very stressful and tiring like designing, installs, and taxes. But they aren't what I do the majority of the time. Because I love woodwork, when I have to work long days (12 hours or more) I end the day not feeling exhausted and hating my life lol. I actually feel like I still have some energy and my mind still feels sharp. And it's encouraging to know that the sky is the limit as my own boss. Thanks for the comment, and make sure you sub to the channel. I'm going to be going much deeper into running a woodworking business in time.
Nice Video clip! Forgive me for chiming in, I would love your initial thoughts. Have you heard about - Proutklarton Money plant Plan (probably on Google)? It is a great one of a kind guide for learning how to make a massive income by launching your own internet business without the hard work. Ive heard some unbelievable things about it and my buddy finally got amazing results with it.
Thank you! This was very helpful!! Just got my first couple of good jobs and I’m banging my head over the fact I don’t have a “big shop” this has put my feet back on the ground. Don’t need a big shop yet
Lovely video content! Forgive me for chiming in, I am interested in your initial thoughts. Have you thought about - Proutklarton Money plant Plan (should be on google have a look)? It is an awesome one off product for learning how to make a massive income by launching your own internet business minus the hard work. Ive heard some incredible things about it and my mate after many years got astronomical success with it.
DeWalt makes good tools. I wouldnt say they definitively surpass Milwaukee tho. They both have their specific tools that i think are a little better than the other. They are both great brands tho
I had a really nice milwaukee drill, hard case, extra battery everything. I also had a dewalt kit with an impact driver, and drill/hammer drill combo, in a soft bag. My truck got broken into a few years back. I have to say my dewalts have far surpassed my milwaukee drill. Still use my dewalts to this day. Something about that ugly yellow bag makes people not want to steal it.
+Mayday's Custom Woodworks Nice Video! Sorry for the intrusion, I would appreciate your thoughts. Have you considered - Proutklarton Money plant Plan (Sure I saw it on Google)? It is an awesome exclusive guide for learning how to make a massive income by launching your own internet business without the hard work. I've heard some pretty good things about it and my close friend Aubrey finally got excellent results with it.
You should make a video on finishing or basics in finishing. New to kitchen cabinets and learning as I go. I'm not a business yet because I want to learn more and from my experience. I can make the nicest piece of work but if the finish is not done right all the work I put in goes down the drain. Thanks for tips as well
Thanks for making video , the 1 tip I got most from was #5 ! Me and my wife r our " own worst critic " 🤔 Me and my wife want every job to b perfect...😳 So , thank u for reassuring us it is okay to make an A- on a test or even a B 😄 Would like to know how u price ur woodworking projects.
Im glad i can help! for cabinetry i do a "linear foot pricing" model and then make adjustments from there, but for custom work i basically just guestimate how long it will take me, then add 20% and times that by my hourly rate, which is $80. $80 an hour isnt cheap so to charge that much you really gotta have a good reputation and move quickly in your shop.
I would be interested in hearing more about how you run your furnature business. Getting clients, how you got started, what types of furnature you have sold, have you tried markets? How do you afford insurance!? Good stuff keep on keeping on.
Great video content! Excuse me for the intrusion, I would love your thoughts. Have you heard the talk about - Proutklarton Money plant Plan (should be on google have a look)? It is an awesome one of a kind product for learning how to make a massive income by launching your own internet business minus the hard work. Ive heard some interesting things about it and my mate at last got cool results with it.
Great Video! I am starting to getting into wood working and beginning my equipment list.I totally agree about not going overboard. A lot of things can be built with a circular saw, driver and a doweling jig. I think I am breaking that rule on one thing and that is a table saw. Since I am an musician and software engineer, I can't risk having an accident so I am going to get a SawStop Jobsite Saw. It is 1000 bucks more than the entry levels but to me that is worth it since an accident can destroy two careers in one go.
Good Information. Thanks for sharing your insight, it's great to hear your advice before you get all the sponsors and become a constant product pitchman, as some others who once were great content providers are now just cashing in on endorsements.
Nice video! Keep up the good work! In my opinion it's quite hard to grow and get successful but grow slow and steady. I had a full-time job I got myself my main income from when growing, that would be my advise to new woodworkers!
Really enjoyed this! Was some good information, thanks for sharing your experience. I’m trying really hard to make woodworking a business so I can eventually leave my job as a paramedic and do something that actually bring me happiness.
interesting points ,if anyone else trying to find out starting woodworking business try Letza Woodworker Lessons (should be on google have a look ) ? Ive heard some incredible things about it and my co-worker got excellent results with it.
Good video! A good and practical approach to the business. Seriously, if I need some good woodworking done that I can't do myself (I'm definitely amateur) I may call you. I don't live far from Modesto.
Thanks man. Much appreciated. and absolutely. you give me a call or email any time. (209)556-8519 maydaymike1991@gmail.com Even if you run into a situation where you need a tool you dont have, you are welcome to stop by the shop and i'll pop it out for you real quick
Hey, I like your attitude and for taking the time to get into those details. I wish you the best. With your attitude, I am sure you will be successful.
Thanks for the Video! Apologies for chiming in, I am interested in your opinion. Have you thought about - Proutklarton Money plant Plan (do a search on google)? It is a smashing one of a kind product for learning how to make a massive income by launching your own internet business without the normal expense. Ive heard some incredible things about it and my work colleague got great success with it.
Good video. From good enough to perfect is usually pretty long way time wise and is customer willing to pay say 25% extra that youve spent on that if he is happy with good enough
I have been through everything this guy is talking about he's obviously done just what I've done painting and finishing is a huge issue sometimes I felt like I could do it myself other times I needed a professional I have made the wrong decisions a few times thinking I could do it myself but would have been better off paying someone
Well painting isn't that bad if it's going smoothly. I actually enjoy it as long as there's no issues... But fixing painting mistakes or trying to improve your skills as a painter really suck. Even masking off cabinets or jobsites to eliminate overspray is a nightmare. Takes forever. But if you have a system that works really well for you that gives very consistent and quality results without a bunch of complications, then it's really not that bad.... But it's taken years of practice for it to even be semj enjoyable for me.
Thanks for sharing those details! I have an objective to start a woodworking business this year, specializing in 3 products until I can proportionately scale. I used to get so caught up in the massive projects I didn't want to start, which has set me back a solid year. Now I have a more digestable goal of specializing in 3 products to beat the market in my area (or discover oversaturation). Once I get there, then I can branch out to other things. I also like the idea of getting the right tool for the right job. I've implemented this recently and it has saved a ton of money and stress not being able to acquire shiny, heavily marketed tools. I just restored two bench planes and now have them performing like $200 planes. It's those details that add up to the big picture in my opinion. How do you gauge the market to understand what will sell? This is a problem I think I may run into. Just want to understand expectations.
Hey Derrick, I know its been some time since your comment. How is your plan going of launching your business? Personally i try not to overthink it too much... Just because there are other people who sell something doesnt mean you cant sell it either. For example you can throw a wrench and hit a cabinet maker. Its a fairly common job... But I sell cabinets all the time. Why do people choose me over someone else? its because they trust me. So instead of saying "I need to sell something thats not being sold much" you can instead just look at what people are buying anywhere and then say "How can I make a case for them buying from me instead?" The marketing term is called "differentiation". You need to make yourself different from other people and really drive that home. You might call it your "niche". My niche is that I may be 20% higher cost, but you can always trust me. when my clients call me they can rest easy knowing i am going to be where i say i will and do what i say i will do, and if there are any issues, i will take care of it. No surprises, no unexpected costs... Just quality service and a quality product... and theres many people who do this. But there are also many people who dont. Just by simply doing "best practice" work you will have a very strong foundation for helping your customers and leaving them with a good experience
@@MaydaysCustomWoodworksthat, and trying to sell other products that aren’t being sold is a double edged sword- they may not be being sold because nobody buys them, and ou wind up ‘educating’ other woodworkers to copy you. Better to build stuff that people already want with your own spin and influences, THEN try to sell existing customers with your new idea- which will also embody your own personality (spin) and influences. While others may ‘copy’ your work in style or dimensions, they can’t copy who you are and if you handle customers appropriately they won’t steal your market base, either. Plus being mindful of your personality infusion into your work and doing that avidly and intentionally while in ‘flow?’ No one can copy that- few are even aware of their inner self or that their intellectual engagement can express itself thematically in even the most mundane work.
"make friends" is much better than saying "network"
Absolutely! Same thing. But networking has a mysterious feeling to it where people get intimidated... There's nothing to be afraid of. Just go make friends.
Love the analogy of the level to perfectionism. I told my husband today at some point you have to recognize when your perfectionism actually halts progress.
Very true! I have never built anything that was perfect... And I've built a lot of stuff. But if it's "very good" then it's good enough for most.
my work may get really good reactions at first glance and people have offerd top end dollar, higher then expected but not many follow through. Few people can afford that kind of extra hours for the same function as a quickly done item. This video definitely made me rethink my want for creating then uncreatable heh.
Great advise. Not sure why nobody commented on this. Best advise is to under promise and over deliver. An average quality worker can still make tons of great ratings given the level of expectation set.
ya... im an idiot and had the comments turned to "needs approval before posting" lol. all fixed now tho! and very true. there are many average craftsmen who have great businesses by great customer relations and not overstating their work.
Thanks for sharing have a blessed day in the name of Jesus
Thanks!
In regards tool brands you can also purchase corded versions of name brand for the similar price as a cheaper cordless brand you just have to deal with inconvenience of a cord. I recommend doing this for heavy used tools until you can upgrade because you can always use the extra power that cheaper brands might not provide.
Great advice!
Great advice!
Amazing in all these comments not one person realizes that you were one of the toughest men on the planet in your weight class in UFC/Bellator. Could have been champ if not for those horrible hand injuries. Retired at 27. You were so fun to watch fight!!
Tool brands DO matter. In the beginning I didn't have much money so I bought cheap tools like 50 euros for a hand drill machine or 60 euros for a multitool and such things. Once I had a very cheap sanding tool with a triangular sandpad on it. That one worked for exactly 2 seconds after using it for the first time (just plug it into a wall outlet, hold it above the workpiece and press the button to see if it worked). After that, the rpm dropped from 1500rpm or so to about 100rpm and it was useless. I could sand faster with my bare hands compared to the speed of that tool after it broke. Another grinding machine of 600 Watts and a 2mm thick grinding disc on it, used for cutting steel, took one hour to cut 4 pieces of metal that were 4cm long and 4mm thick. As soon as the disc hit the metal, it slowed down to a halt, even without using much pressure of the tool. It was like having a grinder with a lego motor on it, it had absolutely no power at all. After searching between my tools, I found a grinder of Bosch and that one took only a few minutes with the same disc to cut those 4 pieces. That Bosch grinder still works today after 10 years. Another jigsaw broke after using it for 5 minutes. The blade was held inside the tool with a 2mm thick aluminum plate, 3mm wide and 10mm long and it used 2 screws 2mm thick to hold that blade. After trying to cut 1 wooden board of 2cm thick, that aluminum plate broke in half and I couldn't insert any other blade ever again. Now I have a Bosch jigsaw and it still works after 6-7 years and I press much harder compared to that jigsaw that broke after 5 mins.
At least 3 cheap brand tools broke on me after the first few minutes of using them. Those cheap brands were like PowerTools, PowerPlus, TopCraft and such brands. Since then, I only buy Bosch, Makita, Hitachi, Black&Decker and those tools still live after 20 years and have had a rougher time than those cheap tools that broke within minutes. I have 1 handheld drilling machine from Black&Decker and is 24 years old and still works flawlessly. No cheap tools for me again. For me, those are only good to buy and put them on display inside a dustfree cabinet or use em to cut paper but nothing more. Of course, the most expensive tools (+500 euros per tool or such figures) are a waste of money if you're starting out and you'll do fine with some cheaper tools like Bosch or Black&Decker (pricerange between 100 and 200 euros). Just don't buy brands from Aldi (like TopCraft or Duro, prices around 40-60 euros), those machines are way too cheap to do anything decent, if they work at all after using them for an hour.
Well said. No point in buying a tool that isn't going to work. That's just throwing money away.
6:39
I painted or varnished A LOT of interiors as a carpenter/remodeler. Why? Because I could control the end results- I could do two things by painting and finishing my own work: 1) if I did an excellent fit and finish and the painter doesn’t have an impeccable quality that day (or worse- the homeowner paints it!!) the finish obscures my good work. Good paint isn’t noticeable in specifics, but the “wow!” factor is both an emotional response (good) and an intellectual response (customer is proud of what he or she got for their money); and 2) if a few things aren’t exactly “right” - and the bigger the project the more likely you will find you had an ‘oops’ or several- a good painter (you) can recover that with some attention. But even good painters care more about themselves than they do your work whereas you care deeply about the final impressions. And you can control that result and eliminate the “why didn’t my painter fix that?!!” by finishing your work yourself.
In correct my friend I have dewalt as well as think and also Parkside I have had my Parkside for years with constant use. For less than 3\4 of the cost don't knock the cheaper brands and don't even think of buying festool
Lol. Festool tools have their place. But they are not a requirement at all. I have many Festool tools. But often people buy Festool because they think they are required for making the best product... Not the case at all. But some Festool products like an MFT, Domino, or their sanders are truly in a class of their own. But they are not required at all to do beautiful work. They just make the work a little bit faster and easier.
Great video man. Being a painter and in sales is definitely helping my transition into woodworking!
Ya man! Great pre-requisites!
I'm a full time sushi chef and and thank you for honesty and time. I just picked up a impact driver and drill combo set and looking forward to building random diy stuff, mainly because one of my random dreams is to be a stay at home dad with his own wood working business. Keep in mind I have no knowledge of wood working but wth let's try it. I'm 28 with 3 kids and a shit job let's do work man
You can do it brother!
You sound exactly like me in terms of your long term goals.
I hope you've taken some steps since last year dude.
Number 3 really got me!! I always want to try and do everything myself
Ya its a difficult one for me too. Its a tough balance of learning what you do and dont wanna do your yourself
Great to see you on here! Been following your fight career since the WEC days. You were one of my favs. Nice to see you doing the woodworking thing.
Thanks for supporting my career Joel! much appreciated
Really really good advice. Am in the process of starting a small workshop but am running into a jam finding decent space. Your video was great though.
I'm glad i could help. Even if you just have some tools and materials you can take outside and bring them back inside afterward, it can do the trick.
Liked and Favorited, and obviously commenting for the algorithm
Thanks man! Much appreciated
Youre a very sharp young man !
I bet you parents are immensely proud of you !
Thanks man! I think they are. Thank you for that compliment
I like how you talk about setting clients expectations. They should know that this is wood we are talking about, there are going to be minor imperfections. There has been a cycle where clients expect the best and business promise the best then clients expect that because it was advertised. Business then have to one up that to get more business, then they promises more and more until they are promising perfection and their clients expect that too. It's a bad cycle and we are all so deep into it.
Very true! A mentor told me it this simply... "Never lie to your customers"
Well done. I started a couple months ago making keepsake boxes. So far, they look like they're put together by a 3rd grader, but I customize all of them with wood-burning, watercolors, and acrylics. Any and all info I can get on this stuff is always helpful. New subber here.
hey, thanks man. kudos for just getting into it and starting off small.
You’ll never know how much this video inspired me. Thank you so much.
I am so glad to hear that! Running a business is a very difficult task with many unexpected turns. But it's incredibly rewarding if you can tackle them appropriately.
I really liked your comments about other trades people who may interact with your customers and products.
thanks!
This was great! Excellent advice not just for woodwork but for any business
Glad you liked it!
Hello, and first let me say thank you. I'm a woodworker who hasn't had much business sense. I typically don't view these kinds of vids, because I just don't want to sit around listening to some guy gibber-jabber. But I am impressed with your presentation. Valuable, to the point, with reasonable info, but not bla bla bla. Again. Thank you. On another note you have really encouraged me. I have great customer service skills, and just about everything you mentioned is common sense for me personally. One of my short-comings is speed and efficiency. I'll have to work that out somehow. Glad to have found your video.
Ah! Yes. That makes sense. Speed and efficiency is something that you never really stop working on in a production environment. But it is secondary to doing a great job. So it's OK if it takes you some time. You just gotta find a "system" that allows you to slowly pick up speed as you do repeat processes. Every time I do something for the first time I am really really slow... Cause I wanna do it right. If I have a job where I know I will likely never do something like it again, then I'll need to charge more money because I know I will be slow. For example I got hired to completely rebuilt a 1931 Chevy Woody car... Likely never gonna do another one. So I gotta charge more money to make it worth my time, and if the client doesn't like my bid then it's OK to let it go. But cabinets or cutting boards or refinishing are things I've done over and over again and I can do them pretty fast. I can charge a little less for those cause I know I can do them fast now. I don't need to charge less money for them... But I can if I want to. Usually I don't.
Speed is usually the last piece of the puzzle to come together. It's OK to jump in head first and be slow and then work on your speed over the years as long as you are intentional about improving.
@@MaydaysCustomWoodworks
Wow. Ok. I receive all that. Thank you very much. I wrestle with balancing my perfectionism with productivity. But I'm I'm again encouraged by your words. I have a 2 car garage which I share with my neighbor. I have his keys, pull out his car, then roll my bench and tools out, use, clean, roll back and repark his car in his space at end of the day. It's a lot. But I am grateful. San Francisco has very little space for Woodworking, so what I do have is a blessing.
There's a set of guidelines that I use in my painting business that you can find online, not going to say the company, not affiliated lol, but it's an association of people in the finishing trades. These guidelines make it possible to dispute a client who might have unreasonable expectations. For instance, a painted level 4 wall has to appear flawless from 6 ft away with a 60 watt light... So nitpicking Nancy who sees an off shade pinpoint on the wall can't refuse to pay you. Hope it helps!
That makes perfect sense! Just to manage the expectations and make it clear what they are purchasing. I like that. Thanks for sharing
Brilliant video and much love from Belfast
Thanks Karl!
Great video bro. Totally right I have had my own glass bus for 11 years. Started it with about $750. I had not tools and joe have a bunch. I end up buying Ryobi more time than not. The wood or job don’t care what bran cuts them. I’m my experience if your the main user and take care of them they’ll be just fine. I like Ryobi because I can get more tool for the same money, which leads to the right tools for right job. I have been blessed and take care of my customers while valuing my time.
Thanks for the input! I always love hearing from people who are making it work.
I worked at a cabinet shop. They had a guy that was making a fortune making all their trim wood.
Ya you can make a great living in many different ways in this industry for sure!
I have a number of Ryobi tools...because they are inexpensive. Not the best tools, but they are improving. I recently bought an impact drill as I refinish my basement and I've been impressed by the quality improvement in Ryobi so far.
ya man i have no problem with Ryobi tools. i own a few myself
Thanks for taking the time to share some of your personal insights. It was helpful to me and i will incorporate this as it applies to me. Best of luck to you.
You are so welcome!
Thank you for taking the time to explain these concepts clearly and concisely. Much appreciated.
You're very welcome!
Good advice.
Glad you think so!
I have no experience in woodworking but I have a passion for wood and I have done a few woodwork stuff just by learning from RUclips videos, thank you so much for the information. Hope to start a small business in woodworking.
Fantastic! I'm happy to help. If you have any questions please feel free to comment and I'll answer any questions you have
@@MaydaysCustomWoodworks Thank you man, you are so kind
Hey man, great video! Idk y u don’t have more views, this was a great set of points that not a lot of people are making. Being a fairly skilled craftsman myself, I still found insight here. Everyone could benefit from getting your name/channel more circulation
Hey, thanks man. I really appreciate that! I look forward to chatting more on the channel.
.
Great advice!
Thanks!
Bubble level was a great analogy
Thanks!
This was great - Thankyou ! I’m on a 5yr plan to cutback my work in Aged Care and start my Upcyling/woodwork/DIY business - I’m a sponge at the moment - taking in all advice and lessons learnt from those already in the business. I don’t expect it to be easy, but I’ll be doing something I love each day - doesn’t get much better than that !! Thanks again for some great advice !!
Nice! You can get a lot done in 5 years with the right plan and work ethic. I hear you. There's some parts of running my own business that are very stressful and tiring like designing, installs, and taxes. But they aren't what I do the majority of the time. Because I love woodwork, when I have to work long days (12 hours or more) I end the day not feeling exhausted and hating my life lol. I actually feel like I still have some energy and my mind still feels sharp. And it's encouraging to know that the sky is the limit as my own boss.
Thanks for the comment, and make sure you sub to the channel. I'm going to be going much deeper into running a woodworking business in time.
Whoops... I forgot that part.... subbed and liked !! Stay safe over there - I’m watching from Oz and COVID sure has hit you guys hard !
Thanks! I look forward to seeing you in other video feeds!
thanks for the video I am starting to sell my stuff and this really helped
Glad it helped!
Nice Video clip! Forgive me for chiming in, I would love your initial thoughts. Have you heard about - Proutklarton Money plant Plan (probably on Google)? It is a great one of a kind guide for learning how to make a massive income by launching your own internet business without the hard work. Ive heard some unbelievable things about it and my buddy finally got amazing results with it.
Thank you! This was very helpful!! Just got my first couple of good jobs and I’m banging my head over the fact I don’t have a “big shop” this has put my feet back on the ground. Don’t need a big shop yet
absolutely brother. Dont go buy a new set of pants until you've out grown your old ones lol
Lovely video content! Forgive me for chiming in, I am interested in your initial thoughts. Have you thought about - Proutklarton Money plant Plan (should be on google have a look)? It is an awesome one off product for learning how to make a massive income by launching your own internet business minus the hard work. Ive heard some incredible things about it and my mate after many years got astronomical success with it.
Thank you brother
Welcome
Dude, Dewalt quality surpasses Milwaukee. I use both and my Dewalt never disappoints. I drop and beat the crap out of them.
DeWalt makes good tools. I wouldnt say they definitively surpass Milwaukee tho. They both have their specific tools that i think are a little better than the other. They are both great brands tho
I had a really nice milwaukee drill, hard case, extra battery everything. I also had a dewalt kit with an impact driver, and drill/hammer drill combo, in a soft bag. My truck got broken into a few years back. I have to say my dewalts have far surpassed my milwaukee drill. Still use my dewalts to this day. Something about that ugly yellow bag makes people not want to steal it.
This was really helpful. I’m just getting started and I’ve been 2nd guessing because of my space limitations. Thanks!
No problem man. Sometimes we just gotta shoot at the target even if we arent sure where it will land!
+Mayday's Custom Woodworks Nice Video! Sorry for the intrusion, I would appreciate your thoughts. Have you considered - Proutklarton Money plant Plan (Sure I saw it on Google)? It is an awesome exclusive guide for learning how to make a massive income by launching your own internet business without the hard work. I've heard some pretty good things about it and my close friend Aubrey finally got excellent results with it.
You are the man 👍👍👍👍
You are!
Thank you
You're welcome
Excellent!
Thanks!
I appreciate the info....Thanks for having the balls to put it out there. I couldn't agree more on what you said.
Thanks man
I am so glad I found this video. I really like the way you explained all of this. Great content
@@pamellalopesoliveira4182 Awesome! Thank you so much for the insight. I already have the location now just habe to get ot going
Thanks man. I appreciate the compliment
You should make a video on finishing or basics in finishing. New to kitchen cabinets and learning as I go. I'm not a business yet because I want to learn more and from my experience. I can make the nicest piece of work but if the finish is not done right all the work I put in goes down the drain. Thanks for tips as well
Very true! Thats exactly why i had to learn painting. Thanks for the video suggestion. I'll keep that in mind
Good advice
Glad you liked it
Thanks for making video , the 1 tip I got most from was #5 ! Me and my wife r our " own worst critic " 🤔 Me and my wife want every job to b perfect...😳 So , thank u for reassuring us it is okay to make an A- on a test or even a B 😄 Would like to know how u price ur woodworking projects.
Im glad i can help! for cabinetry i do a "linear foot pricing" model and then make adjustments from there, but for custom work i basically just guestimate how long it will take me, then add 20% and times that by my hourly rate, which is $80. $80 an hour isnt cheap so to charge that much you really gotta have a good reputation and move quickly in your shop.
Great video man, really helpful
Thanks James!
Thanks
No problem
I would be interested in hearing more about how you run your furnature business. Getting clients, how you got started, what types of furnature you have sold, have you tried markets? How do you afford insurance!? Good stuff keep on keeping on.
Lol ya i think people are very interested in hearing more about how I run my business. More videos soon to come!
Great video content! Excuse me for the intrusion, I would love your thoughts. Have you heard the talk about - Proutklarton Money plant Plan (should be on google have a look)? It is an awesome one of a kind product for learning how to make a massive income by launching your own internet business minus the hard work. Ive heard some interesting things about it and my mate at last got cool results with it.
Very helpful thank you for this
Of course!
Great Video! I am starting to getting into wood working and beginning my equipment list.I totally agree about not going overboard. A lot of things can be built with a circular saw, driver and a doweling jig. I think I am breaking that rule on one thing and that is a table saw. Since I am an musician and software engineer, I can't risk having an accident so I am going to get a SawStop Jobsite Saw. It is 1000 bucks more than the entry levels but to me that is worth it since an accident can destroy two careers in one go.
Thats a great reason to break the rules right there! I would make the exact same call.
It’s been about 6 months how has it been going for you
Thanks for doing the video. It gave great insight to steps needed to starting a woodworking business.
No problem man. Thanks for watching
Cool, I just built myself a CNC router. I think Imma start a furniture making business
Nice!
Thank you for your video
You are welcome
You did a good job explaining. Great advise.
Glad it was helpful!
dude, much respect, awesome mindset, i wish you alot of work and money!
Thanks brother!
Good Information. Thanks for sharing your insight, it's great to hear your advice before you get all the sponsors and become a constant product pitchman, as some others who once were great content providers are now just cashing in on endorsements.
Hey thanks man. I appreciate the compliment
Nice video! Keep up the good work! In my opinion it's quite hard to grow and get successful but grow slow and steady. I had a full-time job I got myself my main income from when growing, that would be my advise to new woodworkers!
Fantastic advice. Very true!
thanks for a serious video for me...best of luck
Most welcome
Absolutely brilliant video, thanks so much
Thanks Usman!
Really enjoyed this! Was some good information, thanks for sharing your experience. I’m trying really hard to make woodworking a business so I can eventually leave my job as a paramedic and do something that actually bring me happiness.
Thanks for your honesty Austin. Keep chugging along brother!
interesting points ,if anyone else trying to find out starting woodworking business try Letza Woodworker Lessons (should be on google have a look ) ? Ive heard some incredible things about it and my co-worker got excellent results with it.
Good video!
A good and practical approach to the business.
Seriously, if I need some good woodworking done that I can't do myself (I'm definitely amateur) I may call you. I don't live far from Modesto.
Thanks man. Much appreciated. and absolutely. you give me a call or email any time. (209)556-8519 maydaymike1991@gmail.com
Even if you run into a situation where you need a tool you dont have, you are welcome to stop by the shop and i'll pop it out for you real quick
Good video! The bubble level illustration was a good way to make your point. I’m subscribing to your channel and I’m looking forward to new content.
Awesome, thank you!
Great content. Liked especially the 'bubble range' explanation.
Glad to hear it!
Awesome video and advice! I’m trying to get started...I’m excited to get going thanks for the advice!
Thanks man! Any time
Thank you. Excellent advice and information.
Very welcome
Thanks for the heads up.very helpful video.
Glad it was helpful!
Good helpful information . Thanks for sharing what you have went through to the ones us of that are thinking about starting in woodworking . A+
Thanks man! Much appreciated
Hey, I like your attitude and for taking the time to get into those details. I wish you the best. With your attitude, I am sure you will be successful.
Thanks, you too!
Thanks for the Video! Apologies for chiming in, I am interested in your opinion. Have you thought about - Proutklarton Money plant Plan (do a search on google)? It is a smashing one of a kind product for learning how to make a massive income by launching your own internet business without the normal expense. Ive heard some incredible things about it and my work colleague got great success with it.
Good advice ....thanks for sharing
My pleasure
try a heater in the shop
I actually have a heater/AC in the shop. I love it lol
Thanks for the advice
You bet
Good points, how is the business going today?
Thanks so much for this video!
Yes sir!
Good video. From good enough to perfect is usually pretty long way time wise and is customer willing to pay say 25% extra that youve spent on that if he is happy with good enough
Great point!
Solid info. Thanks for sharing 🙏🏼🛠
You bet!
i really enjoyed the video , its exactly what i needed to hear. thanks man!
Glad it helped!
Thank you for this video! It’s very helpful
I'm so glad!
Love the level analogy, great stand up advice I appreciate the video dood
Appreciate it!
I have been through everything this guy is talking about he's obviously done just what I've done painting and finishing is a huge issue sometimes I felt like I could do it myself other times I needed a professional I have made the wrong decisions a few times thinking I could do it myself but would have been better off paying someone
@@brianshaw5360 very true! I think for the rest of my career I will always be weighing the risk vs reward of doing it myself and subbing it out.
Thanks for the advice, got a subscriber out of me!
Thanks David!
Thank you. Not coincidentally I'm thinking of doing this. Covid killed my career completely.
I'm sorry to hear that, man! Keep your head up and keep looking for options
Great insights! Much appreciated
My pleasure!
Great video. Thank you!
Glad you liked it!
Why don't people like painting? The nice relaxing end the the project.
Well painting isn't that bad if it's going smoothly. I actually enjoy it as long as there's no issues... But fixing painting mistakes or trying to improve your skills as a painter really suck. Even masking off cabinets or jobsites to eliminate overspray is a nightmare. Takes forever. But if you have a system that works really well for you that gives very consistent and quality results without a bunch of complications, then it's really not that bad.... But it's taken years of practice for it to even be semj enjoyable for me.
@@MaydaysCustomWoodworks i guess when your alone in your own space its alot different
Thank you very much dude! That what i looked for
Glad I could help!
Thanks dude, great video
thanks man
Good information. Thank you!
You bet!
Thanks for sharing those details! I have an objective to start a woodworking business this year, specializing in 3 products until I can proportionately scale. I used to get so caught up in the massive projects I didn't want to start, which has set me back a solid year. Now I have a more digestable goal of specializing in 3 products to beat the market in my area (or discover oversaturation). Once I get there, then I can branch out to other things. I also like the idea of getting the right tool for the right job. I've implemented this recently and it has saved a ton of money and stress not being able to acquire shiny, heavily marketed tools. I just restored two bench planes and now have them performing like $200 planes. It's those details that add up to the big picture in my opinion.
How do you gauge the market to understand what will sell? This is a problem I think I may run into. Just want to understand expectations.
Hey Derrick, I know its been some time since your comment. How is your plan going of launching your business?
Personally i try not to overthink it too much... Just because there are other people who sell something doesnt mean you cant sell it either. For example you can throw a wrench and hit a cabinet maker. Its a fairly common job... But I sell cabinets all the time. Why do people choose me over someone else? its because they trust me.
So instead of saying "I need to sell something thats not being sold much" you can instead just look at what people are buying anywhere and then say "How can I make a case for them buying from me instead?"
The marketing term is called "differentiation". You need to make yourself different from other people and really drive that home. You might call it your "niche".
My niche is that I may be 20% higher cost, but you can always trust me. when my clients call me they can rest easy knowing i am going to be where i say i will and do what i say i will do, and if there are any issues, i will take care of it. No surprises, no unexpected costs... Just quality service and a quality product... and theres many people who do this. But there are also many people who dont. Just by simply doing "best practice" work you will have a very strong foundation for helping your customers and leaving them with a good experience
@@MaydaysCustomWoodworksthat, and trying to sell other products that aren’t being sold is a double edged sword- they may not be being sold because nobody buys them, and ou wind up ‘educating’ other woodworkers to copy you.
Better to build stuff that people already want with your own spin and influences, THEN try to sell existing customers with your new idea- which will also embody your own personality (spin) and influences. While others may ‘copy’ your work in style or dimensions, they can’t copy who you are and if you handle customers appropriately they won’t steal your market base, either. Plus being mindful of your personality infusion into your work and doing that avidly and intentionally while in ‘flow?’ No one can copy that- few are even aware of their inner self or that their intellectual engagement can express itself thematically in even the most mundane work.
good advice man, thanks
No problem!
Amazing! #TeamMayday
Happy 2020 you & yours!
David, WI
Thanks!
Another great video
Thanks Darrell!
Great job this definitely helped!
Thanks Josh!
Awesome Thanks for advice.
You bet!
Really good info! Thanks
You bet!
Great video man
Appreciate it
Good video and great info, thank you
Yes sir! Thank you for watching
Thanks for the great vid man good info.
Any time!
Good topic thank you.
You're welcome