Power button not turning TV on - Replace button
HTML-код
- Опубликовано: 30 июл 2024
- TV Repair video PlayList
• Vertical lines on TV -...
1. Vertical lines on TV - Inspect & clean
• Vertical lines on TV -...
2. Vertical lines on TV - Most common causes
• Vertical lines on TV M...
3. Vertical lines on TV - Replace Main board
• Vertical lines on TV -...
4. Replace TV ribbon wiring
• Vertical lines on TV -... Хобби
TV Repair video PlayList
ruclips.net/video/-QdPg_jPkGY/видео.html
1. Vertical lines on TV - Inspect & clean
ruclips.net/video/5IY6TKdi4kg/видео.html
2. Vertical lines on TV - Most common causes
ruclips.net/video/v6SA5BQCqJQ/видео.html
3. Vertical lines on TV - Replace Main board
ruclips.net/video/qZYYK1xpYQ0/видео.html
4. Replace TV ribbon wiring
ruclips.net/video/O9GTDo2Bfg4/видео.html
How do you replace connection point if it is separated?
@@aceboogie1362
Thanks for watching, are you referring to the wiring itself or the entire connection?
Ether way, the Main Board comes with all new wiring and connections. Below is a link to our video showing this.
ruclips.net/video/CXGMpFpaiME/видео.html
😎👍
Very informative. I'm off to try these steps.
@@lindaveraldi7187
We appreciate you writing us, thank you. We are honored to help. 👍🧰
Where to find the power button replacement?
How hard would it be to wire an extension so you could install the switch a few feet away? (using for a virtual pinball machine..)
Thanks for watching & welcome to the DIY Raptor Club. Not sure, we haven’t tried that. 🤔👍
Great Video
Thank you. 😁👍🧰
Bless you
Thanks for watching. 😎👍
Hi Michael, I have a problem operating my TV without using the remote , the buttons that control the volume and channels on my television does not work, how can I remove the board and replace it, my TV is a Sylvania model number NS-46E790A12, I NEED TO REPLACE THE CIRCUIT BOARD THAT CONTROLS THE VOLUME AND CHANNELS, IT SEEMS TO BE GLUED, PLEASE HELP
Thanks for watching & welcome to the DIY Raptor Club. Let’s get this figured out!
The best thing to do is remove your back panel to gain access to the part itself. Once you have access to the internal portion of TV, locate the part number sticker on the board.
We can use this exact part number to look up your replacement board and get you back up and running. Keep us posted!
Hi Mike Borders!
Hey Ryan, sorry for the delayed response. Hope all is well. 😁👍
The light for the tv power is not coming and the tv is not come on too
Is a new tv I put on 2 time and I take it off and it now coming on back
I'm from South Africa in Phoenix and where is the outlet that I can buy the switch
Thanks for watching. We purchased our replacement panel from:
PartSimple.com
👍
samsung led tv, right?
Thanks for watching, tv in this video is Samsung led. 👍
My TV is a BLAUPUNKT and turn it on with the remote or by hand and it turns off then off about three times everytime. I switched it off at the wall every night and still does it. Once it's on it stays on.
Thanks for watching, this is almost always due to a remote issue. The power button takes a lot of abuse over the years and can also get dirty.
Once dirty on the inside, whether it’s finger oil buildup, dust, or other debris, it can get stuck and continue to turn tv back on after you turn it off.
A friendly cleaning of remote may help or a new exact replacement remote may solve issue. Please keep us posted.
Hey also if you’re into crypto trading, join our newly launched DIY community ecosystem.
Toolboxtoken.com
We DIYers need to stick together! 🧰
Will try that but don't always use the remote, turn it on manually but thanks ❤️
@@az61100
😎👍🧰
What if I have no power button on the back?
Thanks for watching & welcome to the DIY Raptor Club. Newer model TVs have the power button built-in to the actual IR sensor.
The IR sensor is the red light at bottom of screen that the remote communicates with.
The power button might be on the backside of that sensor light. Please keep us posted.
@@DIYwithMichaelBorders hello sir my son destroy the sensor of the tv how can we open it without that? My tech guy dont know to fix it
@@cumlordsama7183
Thanks for watching, you will need to carefully remove back panel to gain access to the sensor.
Once you remove sensor, you can get the part number from old sensor and then purchase the exact replacement sensor for your exact tv.
We can even help you look up a replacement sensor once you get the exact part number from old sensor.
Looking forward to hearing back from you.
@@DIYwithMichaelBorders my tv is a diviant
@@DIYwithMichaelBorders 9v4-0
What if the button is on the side along with volume control etc.
Thanks for watching & welcome to the DIY Raptor Club. Do you have easy access to the side of the TV that you’re referring to?
Newer style TVs may come with sensor activated power button as opposed to an actual push button.
The heat of your fingertip pressed against the sensor will turn on and off the TV if again, it’s not an actual push button.
😎👍
My tv power light is not coming on
The button won't work and the red light works
Thanks for watching, any update? A new power button may be the way to go.