6.0 Powerstroke hot crank no start quick fix

Поделиться
HTML-код
  • Опубликовано: 28 сен 2024
  • Found the problem, FICM was going bad. (fuel injector computer module) located in the driver side valve cover.

Комментарии • 20

  • @deonte2x809
    @deonte2x809 3 года назад +2

    There hating on this but this will save someone’s day I’m sure because I had to use it the other day 😂😂

  • @cutterhastie4988
    @cutterhastie4988 3 года назад +5

    Your truck is going to get addicted to that starting fluid to the point where you having to use a whole can just to start it cold

  • @siclt1
    @siclt1 4 года назад +2

    No!

  • @siclt1
    @siclt1 4 года назад +5

    Don’t ever ever ever and I mean ever use starting fluid in a diesel useless you want to crack your pistons. Use silicone spray only.

    • @AndersonERockefeller
      @AndersonERockefeller  4 года назад +2

      You can use starting fluid if you know how much and make sure glow plugs don't turn on also I sprayed starting fluid on the turbo side not straight in the intake manifold.

    • @frankmartens7065
      @frankmartens7065 3 года назад +7

      I've used to a lot of times on my 6.0, I wouldn't worry about it 😂

    • @justinklassen2965
      @justinklassen2965 2 месяца назад

      Silicone spray?

  • @bwadles7659
    @bwadles7659 2 года назад +1

    Thats possibly the worst thing u could do to a diesel ether has no lubricant even if it says it does its hard on diesel engines and some diesels could get addicted to it why don't u just spend the money and have the dummy plugs replaced instead of fucking ur shit up

    • @josephyuma9530
      @josephyuma9530 2 года назад +1

      What dummy plugs. I’m having the same issues

  • @sinegra30
    @sinegra30 2 года назад

    Really? It is easier to unplug the ICP sensor...

  • @gmiles7217
    @gmiles7217 3 года назад

    "Don't try this at home"

  • @johnwharton3038
    @johnwharton3038 Год назад

    Never use starting fluid. Use brake cleaner.

    • @justinklassen2965
      @justinklassen2965 2 месяца назад

      Why brake cleaner?

    • @johnwharton3038
      @johnwharton3038 2 месяца назад

      @justinklassen2965 because brake cleaner won't pre-ignite the glow plugs and cause a explosion on multiple cylinders. Causing a connecting rod to bend. Brake cleaner gives it the spark to fire but not violent enough to break stuff in the engine.

  • @luckywhitejr.akaralphlwhit3483
    @luckywhitejr.akaralphlwhit3483 Год назад +1

    had this problem , did a filter service on it , problem solved

  • @gerardobemcomo2706
    @gerardobemcomo2706 2 года назад

    Thats not a fix bud...