Oh my God, I wish I could like a comment more than once. I just had the best laugh right now from this. 👏 If Hasbro were a man, you'd be a murderer right now.
@@the_cheap_ones You're wrong there buddy. They have alot more detail and come with one off character specific accessories more often than legends at a cheaper price. Most of the figures have very minimal re use as well.
Recently I ordered the Shockwave Blast made by Pocket World from bbts, which looks really good for a sizable proton cannon blast effect or a kamehameha. Like it actually looks like it can do some real damage as opposed to the tiny blast effects from this and the ones for DBZ figures. I just hope there is no QC issues with it when I get it in hand.
I think that was probably the best photoshop you've done so far. Which is impressive cause this definitely one of Hasbro's better looking contemporary figures anatomy-wise
Thanks for the review, Anthony. Hasbro is helping me save money this year. I was going to buy this but the uni-beam/ arc reactor being too deep in his chest & the inaccuracies on the comic style helmet are annoying.
I find this figure to have even more issues, like the cartoon head not only being too big, but also looking kinda strange, especially in a chin area - I feel it should be more rounded. I also find it ridiculous that the gripping hands are bigger than other hands and they’re design is also a bit different (the fingers are more square and the lines are deeper), so mixing the hands doesn’t look good. Tony’s head not only too big, but also seats way too high… God… like most people I’ve purchased this figure because I’ve been waiting for an animated Iron Man figure since I was a kid, but it needs to be so much better. Also, having cartoon shoulder pads and helmets have a brow would have also helped a lot.
For the first time in a while, my local Wal-Mart had "new" Mavel Legends in stock. I almost bought Darwin for the grins, but then I saw the price. The store also had G.I. Joe figures for the first time. A case? of 6 Lady Jane... in the discount area, next to the baby dolls. And for Star Wars, the same two Lando figures that have been on the peg for a year and a half... the Return of the Jedi one.
Great review Anthony. I’ve been wanting an animated 90s IM for a while but this figure has so much WTF😄 I love the Into the AM shirts. I’ve got a couple so far and always get looks when I wear them. Will definitely grab some more with the sale and your code👍🏾😃
@@CyborgSodaCollects have th figure yourself though buth hsrstylthink th in iron mn gas Tony's stars har was std bit longer we evn inam sm instance it lik lik Dan to hi bsck snd shoulders not like what younsee here th eh know th cou ha ti y chr his hsr out evdnnlong eh cou lik ki wmonstuached wonder woman
I already have the modular Iron Man so I got this just for the cannon, especially since the 3d printed ones I had seen in the past were priced around 35$
Unfortunately for mine, the knee guards yellow paint for the left leg was over painted and fused to its knee joint. I tried heating up to get it off but it left a huge yellow paint smudge on the bright red. Not to mention the right knee has red paint seeping through. Ughhhh. The price point is so high and we are still getting issues like this? So frustrating.
Sorry for the double comment, RUclips is being weird about editing right now. But it looks like it was meant to have a bigger blast effect, as it seems to be designed with multiple sockets to give more surface distribution for a heavier effect
@@toylipswel it unmasked hed fir h werd it kind lok in hindsight it ment based ho Tony st ry lok inniron MSN tas season 2 whre had long hsir but hi har std bit longer in thbseres
The gun is literally just a hunk of plastic with a dab of paint and a comical looking reused blast effect. Hasbro never ceases to display their lack of effort, that's for sure.
The figure is a great one even though it's a Repaint. The Canon though, for that price point, needs paint, and a new high powered blast effect. That blast effect they included is embassing.
If it makes you feel better (I don't know why you would feel bad about this), Mafex's proton cannon for the same version of Iron Man does come with any attachable blast effects or have ports to allow you to choose your own adventure. A very short "charging up" effect that covered the entire barrel would have been super cool.
Also, one of the inaccuracies is the "V" line of the chest plate, that should coincide with the "V" of the pentagon. That said, I kinda like the Tony Stark head sculpt. A mullet always rules LOL. Waiting for Longshot and (I guess I'm alone here) hoping for a mullet mohawk Rogue and a mullet Sue Storm, cause girls also party.
@@AnthonysCustomsyou ever try customizing th I thing so far it th long harstyle hed cou hnwy I guess Cathy wtom on cystom Seth wish Paul Hearst figurine
This is admittedly petty, but realizing that this was an intentional homage to MvC and the show makes me salty that they still didn't line up the unibeam with the pec lines. Not too long ago, I shared to social media an edit showing what that adjustment would look like on the gold figure but even then I thought that figure was all right as is since it's using a valid look per some depictions. But the fact that this is based on two iterations that actually *do* have the unibeam line up makes me bitter at how Hasbro didn't make the adjustments. It's a minor design choice but one that gels with the rest of design's elements.
To me, this is the definition ironman of all time! Got tired of seeing the 80th version like 100x, so getting this in the correct color makes me happy. Except the exclusiveness and price tag... That's the price of almost 3 figures 🤦🏿♂️ but still worth it!
There are a lot of inaccurcies with this figure, first the shoulder pads should have been bigger or at least have extra ones with more scaly look to much the first armor in the series, the gold pieces for the Modular armor are wrong, they were more like golden stripes on the second armor. Aesthetically over all I think the shoulders are just small.
Honestly, I’m probably gonna get this guy just for the Proton Cannon. Blast effects, you can probably pick out from previous releases of Iron Man’s Modular Armor or the classic War Machine Model 11 Armor. I bet you can even use the blast effects from the Transformers War For Cybertron Trilogy: Kingdom Ark for the cannon. 5 mm ports, right?
Got my hands on one last week. Is it perfect?...no. But it is really close to the version of ironman in marvel vs capcom. So for the nostalgia alone..I'm happy with him.
Definitely feels like there was some mixed memos in the development. The electronics on the cannon are red, so red eyes would match up with that. And the energy and blast effects are blue so that would have worked. That'd have been cheaper too right. Less overall paint apps and a fewer number. I feel like when I said "I'll buy this mold every time they give to me" curled a monkeys paw. I'll take another Tony repaint with all the 80th or silver centurion effects. I doubt we'll see the cannon again. But I'll say I don't know how practical a proper effect would be beyond a thin plastic printed one. The ploom is an interesting idea, like half of the cosmic ghost rider wheel?
I am happy with my Modular Iron Man!!! This repaint is definitely overpriced and the colors are not what I want!!! Thanks for pointing out what we all need to know!!!! But, I am definitely interested in those T-Shirts!!!! Thanks again for what you do!!!
I wouldn't be surprised if someone at Hasbro says that the figures don't need paint because the buyers are going to customize them anyway. I wonder if someone in charge uses that as an excuse to get everyone on board with skipping out on paint.
I already have the 2021 Ursa Major BAF wave Modular Iron Man figure, But to be honest, He does look great and the 90s style Tony Stark head looks awesome on him because he does look accurate to the source material of the comics, Also my birthday is in 2 weeks and overall fantastic review on this figure Anthony.
That is definitely Ethan Hawke. Agree with you totally on the finish, they’ve gone ahead and done what they think is right and it is, on paper, but in execution is just not quite what it needs to be.
I own a lot of Into the Am clothing. Always great designs. They are pretty big in the EDM community where I discovered them. Are you a festival goer or just enjoy their clothing?
The Modular mold carries this thing hard, definitely expected better. Thx for the review! Oh and, will you take a look at the Mafex Comic Iron Man?, a lot of people have compared this to that one (Evn tho different armors).
I'm really not a fan of how Hasbro does this style of Iron Men, it didn't look good with the 80th year and this one kinda looks.. worse I think their Iron Men shine better when they are that nice metallic color, but, just my thoughts, to each their own I guess I can see why people would be into these colors, personally I think they come off as cheap also those alternative head sculpts are ugly as hell, they dropped the ball 💀
Hahahaha, that blast effect at the end is SO DROOPY! I wonder if there's weird licensing stuff for the MVC decos, something like why the changed the proton cannon name.
This is a good loking figure but not a great release, imo. It's the perfect example of Hasbro's Modus Operandi: They make a decent enough figure but make enough mistakes on purpose so they have an excuse to release a different version later. Toy Biz Cap is a great example too: The shield has holes and the limbs still have pins, that gives them an excuse to release an improved Cap with no pins and a normal shield, but they will probably release one with dark colors so they have an excuse to release it again with brighter colors but maybe no accessories. It's a scam, lol. I wanted this figure, but I don't like the blue eyed helmet and the unmasked headsculpt...
So the disk hinges in the shoulders are hidden from the outside but yet they are red instead of yellow to match the inside of the shoulder…. Come on Hasbro jeesh do they even pay attention to anything….
Thanks for giving voice to every single thing that already got me to cancel my preorder on this. I would have paid more for them to get it right. I wouldn't give this more than a 6 out of 10.
@Elijah Bruno You bet! I have purchased figs I wasn't going to and not purchased others with the help of reviews that point out various things that increase or decrease the appeal. That said, in this case, I mentioned that I had already canceled my order before seeing this. It was just nice to see someone call out the same, as other reviews were ignoring things I felt were issues with this particular release.
@@jimwheeler9840 Good way of finding a surprise figure that blows expectations. AC's Batman Hush Mafex review earned him my respect all this praise and he just doesn't pull punches and points out what nobody does
@Elijah Bruno Agreed! I am pretty particular with certain things, and it's great to have someone with an eye for detail dig into those, so you can have a better idea of what you are getting, etc. Example: the Black Adam fig with cloak. I saw reviews, but almost none really provided an idea of how limited the actual poseability was, between McFarlane's articulation and that massive cape. On the other hand, I wasn't going to buy the Quake fig until seeing some reviews and seeing the good aspects repeatedly pointed out.
I'll bet you a million dollars that these guys sit in a big room passing around joints saying... "Lol...What kinda crap can we make to screw with our customers? Lol".... "oooooh, I know.... let's make big heads and wimpy accessories for the cannon!! Lol"
that freaking cannon is awesome. but the figure is kind of weirdly lazy. like they don't want to bother for accuracy. like they smashed mvc ironman and ironman animated series ironman in 1 figure.
Into the AM Black Friday! Save 30% OFF SITEWIDE +10% off using my link below:
intotheam.com/anthonyscustoms
Off topic but i love how Ironman has better splits than Spider-Man😂
The blast effect for the canon is hilarious!
It's a joke and it's so laughably bad.
$50 plus tax and shipping smh
The blast effect is pretty representative of Marvel Legends as a whole rn
Oh my God, I wish I could like a comment more than once. I just had the best laugh right now from this. 👏 If Hasbro were a man, you'd be a murderer right now.
The re use of effects accessories is so comical. Meanwhile, Mcfarlane releases one off accessories with characters at a cheaper price...unbelievable.
😂
@@CyborgSodaCollects midfarlane figures look like trash compared to most mls
@@the_cheap_ones You're wrong there buddy. They have alot more detail and come with one off character specific accessories more often than legends at a cheaper price. Most of the figures have very minimal re use as well.
This figure with the huge gun and tiny blast reminds me of the old Road Runner cartoons lol.
PROTON CANNOOOOONNNNNNNN!!!!!!!!
...pew.
Recently I ordered the Shockwave Blast made by Pocket World from bbts, which looks really good for a sizable proton cannon blast effect or a kamehameha. Like it actually looks like it can do some real damage as opposed to the tiny blast effects from this and the ones for DBZ figures. I just hope there is no QC issues with it when I get it in hand.
Did you receive it ? What are your thoughts ?
@@toys-trackerwho knows
I think that was probably the best photoshop you've done so far. Which is impressive cause this definitely one of Hasbro's better looking contemporary figures anatomy-wise
Thanks
The head sculpt looks like it wants to say “my name is Inigo Montoya, you killed my father, prepare to die.”
Ha
@@AnthonysCustomsyeh or inind lol Ron Jeremy im a way
Thanks for the review, Anthony. Hasbro is helping me save money this year. I was going to buy this but the uni-beam/ arc reactor being too deep in his chest & the inaccuracies on the comic style helmet are annoying.
13:17 Dig this Darwin shot.
I find this figure to have even more issues, like the cartoon head not only being too big, but also looking kinda strange, especially in a chin area - I feel it should be more rounded. I also find it ridiculous that the gripping hands are bigger than other hands and they’re design is also a bit different (the fingers are more square and the lines are deeper), so mixing the hands doesn’t look good. Tony’s head not only too big, but also seats way too high… God… like most people I’ve purchased this figure because I’ve been waiting for an animated Iron Man figure since I was a kid, but it needs to be so much better. Also, having cartoon shoulder pads and helmets have a brow would have also helped a lot.
I hope mafex does this armor. They already made the MVC proton cannon but still not the MVC armor.
They’ll make him look too thin.
@@brandofigure nah
The canon looks like a torch lighter with the blast effect 😂. Love the poses. You rock Anthony ❤❤❤
It really does. Didn't think of that. Missed joke opportunity.
More like a thruster
13:18 YEEE HAWW!!! A ride with them Protien Cannons with Darwin could lift your day.
For the first time in a while, my local Wal-Mart had "new" Mavel Legends in stock. I almost bought Darwin for the grins, but then I saw the price. The store also had G.I. Joe figures for the first time. A case? of 6 Lady Jane... in the discount area, next to the baby dolls. And for Star Wars, the same two Lando figures that have been on the peg for a year and a half... the Return of the Jedi one.
under the mask of Ironman was hiding Inigo Montoya
Great review Anthony. I’ve been wanting an animated 90s IM for a while but this figure has so much WTF😄 I love the Into the AM shirts. I’ve got a couple so far and always get looks when I wear them. Will definitely grab some more with the sale and your code👍🏾😃
That's totally the MvC Proton Cannon :)
I wish storm collectibles got to make this how epic would it be
Pretty epic
@@AnthonysCustomsyeh imagine if th coy go two dfenynmajed tkny hed th long harstyle and th short hair
8:45-you know that cute yet funny fart noise used in movies and shows? That's what comes to mind when i see this lol
They could've added lights or sounds to that cannon for this price.
Id take paint on everything before electronics
@@AnthonysCustoms a wash of any kind would make a BIG difference.
Yes
@@CyborgSodaCollects have th figure yourself though buth hsrstylthink th in iron mn gas Tony's stars har was std bit longer we evn inam sm instance it lik lik Dan to hi bsck snd shoulders not like what younsee here th eh know th cou ha ti y chr his hsr out evdnnlong eh cou lik ki wmonstuached wonder woman
I already have the modular Iron Man so I got this just for the cannon, especially since the 3d printed ones I had seen in the past were priced around 35$
Unfortunately for mine, the knee guards yellow paint for the left leg was over painted and fused to its knee joint. I tried heating up to get it off but it left a huge yellow paint smudge on the bright red. Not to mention the right knee has red paint seeping through. Ughhhh. The price point is so high and we are still getting issues like this? So frustrating.
Looks pretty cool, man I wish he had red eyes on the first head. The accessories are cool
Sorry for the double comment, RUclips is being weird about editing right now.
But it looks like it was meant to have a bigger blast effect, as it seems to be designed with multiple sockets to give more surface distribution for a heavier effect
Hasbro is the literally the definition of a passing grade.
They have a big blast effect for Transformers (bloosh effect if anyone here watch emgo lol), idk why they didn't use those.
thanks once again, Anthony, for keeping everyone’s head on straight.
Happy to help
Oh, that head sculpt is weird! I don't want him looking at me like that. Now I feel weird about mine showing up, soon...
Also, thanks for the thorough breakdown. 🤙
He looks like Peter Sarsgard. It's a very good sculpt of the cartoon face.
Did you see the side-by-side i showed? It doesn't look anything like the cartoon.
@@AnthonysCustoms robots, man... 🙃
@@toylipswel it unmasked hed fir h werd it kind lok in hindsight it ment based ho Tony st ry lok inniron MSN tas season 2 whre had long hsir but hi har std bit longer in thbseres
The gun is literally just a hunk of plastic with a dab of paint and a comical looking reused blast effect. Hasbro never ceases to display their lack of effort, that's for sure.
13:16 hahahahaha, Darwin be like "Oh yeah, I'm the rocketeer now!🚀" 🤣
The figure is a great one even though it's a Repaint. The Canon though, for that price point, needs paint, and a new high powered blast effect. That blast effect they included is embassing.
If it makes you feel better (I don't know why you would feel bad about this), Mafex's proton cannon for the same version of Iron Man does come with any attachable blast effects or have ports to allow you to choose your own adventure.
A very short "charging up" effect that covered the entire barrel would have been super cool.
Also, one of the inaccuracies is the "V" line of the chest plate, that should coincide with the "V" of the pentagon. That said, I kinda like the Tony Stark head sculpt. A mullet always rules LOL. Waiting for Longshot and (I guess I'm alone here) hoping for a mullet mohawk Rogue and a mullet Sue Storm, cause girls also party.
13:20 Hell yes Darwin! That image deserves to be framed and hung up on a wall
Surprised he didn't fit a "That's what she said" joke about the Proton Canon effect...
That t-shirt is awesome
Oh my god the blast effect
Is there somewhere you can purchase different blast effects separately?
Nope
We need someone to print a giant blue blast effect.
I think the colors are accurate to the Iron Man MVC sprites actually. It is just as bright red and yellow ingame
It's definitely a good enough figure.
for that price, good enough is not good enough. hasbro doing passing grades on everything is ass
The face looks like more like young Charles Bronson with long hair lol 😂
@theclector4835 or lolong like liam neeeson kind of
This reminds me why I prefer to just pay the extra money for a Mafex sometimes.
“Weird in-between things” is becoming Hasbro’s design philosophy. I don’t know where they get their reference pics from.
that reference to Dr Strangelove is hilarios. Laughed loud
I definitely know what you're referring to and did it on purpose
@@AnthonysCustomsyou ever try customizing th I thing so far it th long harstyle hed cou hnwy I guess Cathy wtom on cystom Seth wish Paul Hearst figurine
This is admittedly petty, but realizing that this was an intentional homage to MvC and the show makes me salty that they still didn't line up the unibeam with the pec lines. Not too long ago, I shared to social media an edit showing what that adjustment would look like on the gold figure but even then I thought that figure was all right as is since it's using a valid look per some depictions. But the fact that this is based on two iterations that actually *do* have the unibeam line up makes me bitter at how Hasbro didn't make the adjustments. It's a minor design choice but one that gels with the rest of design's elements.
To me, this is the definition ironman of all time! Got tired of seeing the 80th version like 100x, so getting this in the correct color makes me happy. Except the exclusiveness and price tag... That's the price of almost 3 figures 🤦🏿♂️ but still worth it!
if i ever get this im only doing so to make him blue and yellow and have him posed for LIGHT PUNCH! MEDIUM PUNCH! LIGHT KICK! HEAVY PUNCH! diaorama.
Try using Cannonball's leg blast effect on the plasma cannon. Lol.
Hard pass lol
Maybe his top half though...
There are a lot of inaccurcies with this figure, first the shoulder pads should have been bigger or at least have extra ones with more scaly look to much the first armor in the series, the gold pieces for the Modular armor are wrong, they were more like golden stripes on the second armor. Aesthetically over all I think the shoulders are just small.
Honestly, I’m probably gonna get this guy just for the Proton Cannon.
Blast effects, you can probably pick out from previous releases of Iron Man’s Modular Armor or the classic War Machine Model 11 Armor. I bet you can even use the blast effects from the Transformers War For Cybertron Trilogy: Kingdom Ark for the cannon. 5 mm ports, right?
Got my hands on one last week.
Is it perfect?...no.
But it is really close to the version of ironman in marvel vs capcom.
So for the nostalgia alone..I'm happy with him.
Mvc, head should have red eyes and yellow on the forehead to be accurate. How war machine said here is my Sunday best proton cannon
Let me show you how to do an infinite!
Definitely feels like there was some mixed memos in the development. The electronics on the cannon are red, so red eyes would match up with that. And the energy and blast effects are blue so that would have worked. That'd have been cheaper too right. Less overall paint apps and a fewer number.
I feel like when I said "I'll buy this mold every time they give to me" curled a monkeys paw. I'll take another Tony repaint with all the 80th or silver centurion effects. I doubt we'll see the cannon again. But I'll say I don't know how practical a proper effect would be beyond a thin plastic printed one. The ploom is an interesting idea, like half of the cosmic ghost rider wheel?
Something like that, yeah
Just get the Mafex one.
It's not even close to the same thing
Proud of you
Heres my Sunday best
Assuming I'm not the only one that got one with way too loose wrist ports
Makes using the 'Plasma Cannon' a bit of a pain
I didn't notice a problem on mine
@@AnthonysCustoms Well crap lol
Guess I'll try my luck again if they go on sale in a few months
On wich Marvel Legend they should base There New mold ?
I don't understand your question. Sorry
why not go with like a plastic picture for a blast effect. like revoltech Deku's Smash! plastic speech bubble
I am happy with my Modular Iron Man!!! This repaint is definitely overpriced and the colors are not what I want!!! Thanks for pointing out what we all need to know!!!! But, I am definitely interested in those T-Shirts!!!! Thanks again for what you do!!!
Thanks for the support!
I wouldn't be surprised if someone at Hasbro says that the figures don't need paint because the buyers are going to customize them anyway. I wonder if someone in charge uses that as an excuse to get everyone on board with skipping out on paint.
Well look what they're already charging us. What do you think it would cost with paint?
Love darwin photos at the end of the video, they are very creative
Superior tech!
The blast effect 💀
Proton cannon is pretty sweet👍.
IIRC the colors are emulating the ToyBiz toys from the 90s.
They match mvc. They just shouldn't be glossy is all.
I wonder how the mafex one is
Ask robo. He seemed like he was having a great time with it. 🙃
For a iron man and big gun it looks good?
I already have the 2021 Ursa Major BAF wave Modular Iron Man figure, But to be honest, He does look great and the 90s style Tony Stark head looks awesome on him because he does look accurate to the source material of the comics, Also my birthday is in 2 weeks and overall fantastic review on this figure Anthony.
That is definitely Ethan Hawke.
Agree with you totally on the finish, they’ve gone ahead and done what they think is right and it is, on paper, but in execution is just not quite what it needs to be.
Dude you should start your own action figure company
i am doing that
@@AnthonysCustoms really I never knew
I own a lot of Into the Am clothing. Always great designs. They are pretty big in the EDM community where I discovered them. Are you a festival goer or just enjoy their clothing?
Just the clothing lol.
@@AnthonysCustomsdo you hv old toy biz iron man has figures when your we a kid th on privy.lovk bit mo lol cartion iron msnnthem this thibg
The Modular mold carries this thing hard, definitely expected better. Thx for the review!
Oh and, will you take a look at the Mafex Comic Iron Man?, a lot of people have compared this to that one (Evn tho different armors).
I don't think so. I don't see a need for that release at mafex pricing. Sorry
i'll be waiting for Mafex to make this one version 🤣
I'm really not a fan of how Hasbro does this style of Iron Men, it didn't look good with the 80th year and this one kinda looks.. worse
I think their Iron Men shine better when they are that nice metallic color, but, just my thoughts, to each their own I guess I can see why people would be into these colors, personally I think they come off as cheap
also those alternative head sculpts are ugly as hell, they dropped the ball 💀
Hey, that’s a nice happy meal toy, where’d you get it?
I like the Ethan Hawke 🤣🤣🤣
I enjoy the release but it definitely could have been better.
wrong ethan hawk played MvC ironman 10/10 accuracy
Hahahaha, that blast effect at the end is SO DROOPY!
I wonder if there's weird licensing stuff for the MVC decos, something like why the changed the proton cannon name.
What's the point of a windowless box if ur gonna put a window on the interior box!
This is a good loking figure but not a great release, imo.
It's the perfect example of Hasbro's Modus Operandi: They make a decent enough figure but make enough mistakes on purpose so they have an excuse to release a different version later.
Toy Biz Cap is a great example too: The shield has holes and the limbs still have pins, that gives them an excuse to release an improved Cap with no pins and a normal shield, but they will probably release one with dark colors so they have an excuse to release it again with brighter colors but maybe no accessories. It's a scam, lol.
I wanted this figure, but I don't like the blue eyed helmet and the unmasked headsculpt...
Hopefully you review the Mafex comic Iron Man. Leagues ahead of this figure
I don't plan to buy that. Sorry
@@AnthonysCustoms damn… missed opportunity.
Well, now we van pretend the canon is failing. That's new... No? Ok.
So the disk hinges in the shoulders are hidden from the outside but yet they are red instead of yellow to match the inside of the shoulder…. Come on Hasbro jeesh do they even pay attention to anything….
Yes. It makes perfect sense.
Thanks for giving voice to every single thing that already got me to cancel my preorder on this. I would have paid more for them to get it right. I wouldn't give this more than a 6 out of 10.
Has any review here made you want to get a figure? Your comment implies you look for a subjective reason to cancel your preorders
@Elijah Bruno You bet! I have purchased figs I wasn't going to and not purchased others with the help of reviews that point out various things that increase or decrease the appeal. That said, in this case, I mentioned that I had already canceled my order before seeing this. It was just nice to see someone call out the same, as other reviews were ignoring things I felt were issues with this particular release.
@@jimwheeler9840 Good way of finding a surprise figure that blows expectations. AC's Batman Hush Mafex review earned him my respect all this praise and he just doesn't pull punches and points out what nobody does
@Elijah Bruno Agreed! I am pretty particular with certain things, and it's great to have someone with an eye for detail dig into those, so you can have a better idea of what you are getting, etc. Example: the Black Adam fig with cloak. I saw reviews, but almost none really provided an idea of how limited the actual poseability was, between McFarlane's articulation and that massive cape. On the other hand, I wasn't going to buy the Quake fig until seeing some reviews and seeing the good aspects repeatedly pointed out.
@@jimwheeler9840do you hsv old toy biz iron man action figures
It amuses me that Hasbro as a word is now a Verb.
It looks like a reused blast effect from transformers.
take a kamehameha blast effect instead
An 8 is not bad.
I'll bet you a million dollars that these guys sit in a big room passing around joints saying... "Lol...What kinda crap can we make to screw with our customers? Lol".... "oooooh, I know.... let's make big heads and wimpy accessories for the cannon!! Lol"
that freaking cannon is awesome. but the figure is kind of weirdly lazy. like they don't want to bother for accuracy. like they smashed mvc ironman and ironman animated series ironman in 1 figure.
Agree the effect sucks
Man, I laughed at @8:45 🤣. That sums up what Hasbro's Marvel Legends is nowadays, PATHETIC 🤣.
Are you having blast-effect dysfunction? Ask your doctor about Anthony's Customs.