I have recognized two italian siren tones generated from The Whelen CenCom Sapphire Siren Have: it's an italian siren tone of carabinieri and other italian siren tone of polizia, i have suspect of this multiple siren tone generator is produced in the USA and in the all Europe countries, including Italy; the difference of American light bar supplied with Whelen CenCom Sapphire Siren with European (Italian) Light bar with another italian Light and beacons controller siren tone generator is Blue Beacon Lights supplied on italian polizia and italian Carabinieri Vehicles
@@FatJebusGaming Programming is simple. Connect your computer to the amplifier with a USB-A to USB-B cable, load your configuration on the computer software, and press the transfer button on the top left of the screen. The amplifier doesn't need power during programming. For the backlighting, apply power to one of the wires in the 14-wire harness. It's labeled on the top of the amplifier.
models by this company are used for the next cars: Cadillac escalade 2024; Dacia Duster G3; Dacia Logan G3 FL-2; Kia Sportage; Kia Sorento; Kia ev6; Renault Clio 5 FL; Nissan Qashqai; upcoming Kia ev3; KIA ev9; Kia soul (out forever) so... Ford focus; VW id 5 Vans Mercedes Vito; Sprinter. Trucks: Mercedes actros; Volvo FH; Renault C460; etc. That's all
Hi. maybe you can help me out. i have no backlight on my controlhead. main plus/minus attached, also ignition wire and backlight trigger. any suggestions? greetings from germany
By default, the backlighting is very dim. You can adjust it in Output -> [your control head] -> Set Backlight Intensity. If it's still not working then make sure you have the right control head.
You need power to the two thick red power cables and to the ignition and backlighting inputs. Ground to the two thick black cables. That's all you need for it to power on.
They don't make controllers with enough buttons for these tones. Brain overload trying to remember where they are all assigned to. Great video nonetheless 🙂
Развлечения
Greenvile emergency Vehicles siren Updates be like :
Roblox
Lol
For real 😂
Honestly IMO THE BEST SIRENS U WILL EVER HEAR
Well done! Thank you. Low frequencies travel farther and penetrate vehicles better. But many of these dwell on the peak frequencies.
1:31 federal signal?!
I swear the cencom sounds so good
I agree!
way too high-pitched IMO. Doesn’t travel as good or pierce soundproofing.
4:44 and 6:21 are my personal favourites.
5:35 hearing like this GTA vcs ambulance
I have recognized two italian siren tones generated from The Whelen CenCom Sapphire Siren Have: it's an italian siren tone of carabinieri and other italian siren tone of polizia, i have suspect of this multiple siren tone generator is produced in the USA and in the all Europe countries, including Italy; the difference of American light bar supplied with Whelen CenCom Sapphire Siren with European (Italian) Light bar with another italian Light and beacons controller siren tone generator is Blue Beacon Lights supplied on italian polizia and italian Carabinieri Vehicles
Yes, this siren does have those siren tones but I don’t think they use this siren in Italy. They probably use another one that sounds the same.
Would love a program video and how you managed to push a shift button for even more sounds
I didn’t push a shift button. Each configuration only allows for 15 tones, so I had to reprogram it multiple times to make this video.
@@thelightguy2 Make a progaming video, show how to export from the app to the brians
@@thelightguy2 please make a program video you rock. and what wire makes the backlight work from the brain? The controller has only one plug
@@FatJebusGaming Programming is simple. Connect your computer to the amplifier with a USB-A to USB-B cable, load your configuration on the computer software, and press the transfer button on the top left of the screen. The amplifier doesn't need power during programming. For the backlighting, apply power to one of the wires in the 14-wire harness. It's labeled on the top of the amplifier.
@@thelightguy2 you rock
models by this company are used for the next cars:
Cadillac escalade 2024; Dacia Duster G3; Dacia Logan G3 FL-2; Kia Sportage; Kia Sorento; Kia ev6; Renault Clio 5 FL; Nissan Qashqai; upcoming Kia ev3; KIA ev9; Kia soul (out forever) so...
Ford focus;
VW id 5
Vans
Mercedes Vito; Sprinter.
Trucks:
Mercedes actros; Volvo FH; Renault C460; etc.
That's all
4:43 6:22 Dutch 3 Tone Siren
Hi. maybe you can help me out. i have no backlight on my controlhead. main plus/minus attached, also ignition wire and backlight trigger. any suggestions? greetings from germany
By default, the backlighting is very dim. You can adjust it in Output -> [your control head] -> Set Backlight Intensity. If it's still not working then make sure you have the right control head.
Do you have to download these from the computer or are they all factory loaded into it?
You have to download the tones from the computer as a configuration. Each configuration only allows for 15 tones.
Question a buddy of
Mine just got one of these and he what’s to know what type of cords it takes for pc
It's a USB A to USB B cable.
1:19 can you make a video dedicated to mechanical wail?
Sure, I'll comment back on this with the link once it's made.
ruclips.net/user/shortsiJ7rktQIe4E?feature=share
Do you have deetz 711/211 lights. I need it too
No, I do not have those.
Is there any volume controls on the software or hardware?
No there is not, so I installed a resistor in line with one of the speaker wires.
How do you wire this up? I have one and I can't get it to work
You need power to the two thick red power cables and to the ignition and backlighting inputs. Ground to the two thick black cables. That's all you need for it to power on.
@@thelightguy2 I did all that, it powers on and the PA works, but the control head doesn't seem to turn on or function at all
@@jonathanholloway6287 You might have gotten the cencom gold controller, which is what I did at first. Mine has "WeCan Controller" on the back.
@@thelightguy2 I have both, neither are working
@@jonathanholloway6287 I have no idea why it's not working then. Something might be damaged.
6:12 is nice
1:32
3:28
0:56 1970s / London Sirens
How do u program new tones?
Whelen has a software for programming the Sapphire. I just created a configuration and transferred it to the amplifier.
@@thelightguy2 yea i was wondering if for this model, does the control pad have a ethernet port i need to connect to? Or is it through the amplifier?
@@user-jc1ob1nl8m The port is in the amplifier. It's a USB-B port.
They don't make controllers with enough buttons for these tones. Brain overload trying to remember where they are all assigned to. Great video nonetheless 🙂
Yeah, this specific controller is just a big grid of buttons, but their newer controllers are organized a bit better.
Make me a 21 button controller with a rotary knob and Ill send all my money straight away.
1:32 what is this tone and how do you get it
Whelen calls it the Ultimate Hi-Lo and it’s available in the programming software.
Is installing one of these difficult?
I haven’t installed one of these myself, but it should be pretty straightforward.
0:55
Eq2b but on a budget
Is this used on police cars or ambulances?
These are usually used on police cars.
@@thelightguy2 cwool!!!
They are on all types on emergency vehicles. Not just cop cars .
Why do some of the tones sound like Federal Signal sirens?
I guess Whelen got jealous that Federal Signal had all the cool tones and “took inspiration!”
I need one
Yes you do
Yeah idk how to get one
1:31 what is this called??
That's Whelen's "Ultimate Hi-Lo" tone. It's a copy of the Federal Signal "Ultra Hi-Lo".
5:41 Carson copy?!
Yeah it sounds pretty similar. Whelen calls it Wail-B.
Why does it look like an FS smart siren
Lol yeah it does kind of look like one.
irish firetrucks use this siren
Cycled through those siren tones way too quick!!!!