Like all of the A1 Auto DIY videos, this one was very helpful. I wanted to upgrade the fog lights on my daughter's 2007 to LEDs. What I found is that you can easily access them by following this tutorial without removing the bottom snap fasters or the 10mm bolts on each side. Just remove the top radiator cover as shown and the snap fasteners and phillips screws in the wheel wells. Then pull out at each side as shown and you'll be able to easily reach the fog lights.
those two 10mm bumper bolts 2:48 ... both of my 2011 rusted solid.... IMHO - soak with rust buster spray a day or two before, and do it again the first thing when you're going to do the job. I ended up busting that funky front part of the inner fender liner on the right side. ... ** that stupid J-clip retainer ** ... they really should have just used a fender washer and nut.
Excellent video - my 2008 CR-V LX was slightly different. No screws on the underside at the ends ( the ones you sprayed ) they were push clips. Also the license plate bracket may need to come off if attached. In NJ we have to display front and rear plates. It did take longer than 9 minutes though LOL Thanks for the videos
Good day. I have a question. The bumper of my CR-V 2010 hit something upfront, causing the upper corners to dislocate and misaligned a bit, about 10 mm from the car's external surface. Can I just push it straight back to align it? I am worried that if I push it straight, I might break something.
I’m watching this because I was driving home from the gym tonight (November, 2023) & a deer ran right out in front of my car, I hardly got a look at him, because he hit the ground, sprung back to his feet, and ran right back into the woods where he came out of… so I stopped at a supermarket, and the front bumper of my 2011 Honda CR-V was a little bit separated, but this video shows me basically everything I need to know to fix it…
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +BiBiN DaS
Removing bumper without headlight washer jet is quite easy - but how to remove bumper with washer jets? Washers in Honda CR-V III are mounted to the bumper with two screws each. Are you able to prepare video guide how to remove/replace front bumper equipped with headlight washer jets?
Does the grill and the part with the logo unscrew from the bumper? My bumper is broken but those parts are ok, wondering if I can transfer them to the new bumper.
Almost exactly what you are explaining happened to me just last week. I bought some JB plastic weld for about $7 and glued the two pieces back together.
Original has a part number at the back but sometimes aftermarket has it too. Ofcourse aftermarket use different quality plastic. Very rear that aftermarket better than original but usually a lot cheaper.
+Valerie Rondone Thanks for watching! We just reused the original bumper in this video as this was just a demonstration. It is best to paint the bumper off the vehicle if you get a new one, as it is more work to paint after it has been installed!
Hello, Thank you for contacting us! We cannot recommend a grille or bumper kit for you as we do not carry that part, and without knowing the specifics we cannot guarantee the parts you are looking at will fit. Please let us know if you have any further questions. +bukky maxwell
yeah, no kidding... both of my 2011 rusted solid.... IMHO - soak with rust buster spray a day or two before, and do it again the first thing when you're going to do the job. I ended up busting that funky front part of the inner fender liner on the right side. ... ** that stupid J-clip retainer ** ... they really should have just used a fender washer and nut.
es facil podes remober el babero de la rueda dereche acompañante y esta aabajo la bomba es un cilindro del tamaño de una pila si es que no queres saacar todo el paragolpes saludos
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Like all of the A1 Auto DIY videos, this one was very helpful. I wanted to upgrade the fog lights on my daughter's 2007 to LEDs. What I found is that you can easily access them by following this tutorial without removing the bottom snap fasters or the 10mm bolts on each side. Just remove the top radiator cover as shown and the snap fasteners and phillips screws in the wheel wells. Then pull out at each side as shown and you'll be able to easily reach the fog lights.
Very clear explanation - I have to reattach the bumper on our CR-V and the video is useful to show how the parts interlock. Thank You!
those two 10mm bumper bolts 2:48 ... both of my 2011 rusted solid.... IMHO - soak with rust buster spray a day or two before, and do it again the first thing when you're going to do the job. I ended up busting that funky front part of the inner fender liner on the right side. ... ** that stupid J-clip retainer ** ... they really should have just used a fender washer and nut.
Excellent video - my 2008 CR-V LX was slightly different. No screws on the underside at the ends ( the ones you sprayed ) they were push clips. Also the license plate bracket may need to come off if attached. In NJ we have to display front and rear plates. It did take longer than 9 minutes though LOL Thanks for the videos
Good day. I have a question. The bumper of my CR-V 2010 hit something upfront, causing the upper corners to dislocate and misaligned a bit, about 10 mm from the car's external surface. Can I just push it straight back to align it? I am worried that if I push it straight, I might break something.
Great Job! very useful !
I’m watching this because I was driving home from the gym tonight (November, 2023) & a deer ran right out in front of my car, I hardly got a look at him, because he hit the ground, sprung back to his feet, and ran right back into the woods where he came out of… so I stopped at a supermarket, and the front bumper of my 2011 Honda CR-V was a little bit separated, but this video shows me basically everything I need to know to fix it…
It is an awesome channel it helped me in many ways with my cr v
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +BiBiN DaS
Removing bumper without headlight washer jet is quite easy - but how to remove bumper with washer jets? Washers in Honda CR-V III are mounted to the bumper with two screws each. Are you able to prepare video guide how to remove/replace front bumper equipped with headlight washer jets?
+Marcin We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c
+Marcin Thanks for the tip! We'll pass this info along to our production team.
Same problem here!
Does the grill and the part with the logo unscrew from the bumper? My bumper is broken but those parts are ok, wondering if I can transfer them to the new bumper.
Almost exactly what you are explaining happened to me just last week. I bought some JB plastic weld for about $7 and glued the two pieces back together.
is there a video for the rear bumper? The rear bumper on my CRV has a softball size dent and I can't figure out how to push it back out?
+@lisaburke4779 We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c
What is the total number of brackets on the front body of the crv gen 3... Thank you, brothers and sister
Hide your chipmunks when this guy's in town
what are the features of an original bumper , does it have a Honda logo on it or a part number
Original has a part number at the back but sometimes aftermarket has it too. Ofcourse aftermarket use different quality plastic.
Very rear that aftermarket better than original but usually a lot cheaper.
what if you have a radar under the honda emblem?
Did you paint the new bumper before installing it
+Valerie Rondone Thanks for watching! We just reused the original bumper in this video as this was just a demonstration. It is best to paint the bumper off the vehicle if you get a new one, as it is more work to paint after it has been installed!
We have installed a base plate to fir a stowbar, when replacing the bumper it’s hitting something and won’t go back in place..
I need to replace a broken bumper on this car which parts do I need? I think there are 3 main pieces anything else I need? Thanks
Please can i upgrade my Honda CR-V 2008 front bumper and grill kits to 2010 Honda Crv bumper and front grill?????
Hello,
Thank you for contacting us! We cannot recommend a grille or bumper kit for you as we do not carry that part, and without knowing the specifics we cannot guarantee the parts you are looking at will fit. Please let us know if you have any further questions.
+bukky maxwell
The hood is different on the 2007-2009 vs. 2010-2011.
Is a 2008 Honda CRV front Bumper compatible with a 2010 Honda CRV EXL ?
should be very same if not exactly... is the 3rd generation model from 2007 to 2011
What can I do if one bolt under the bumper broke in 2?
Cry
@@richardrichard5409 LMAO
👍👍👍
Those two bolts under the bumper....
yeah, no kidding... both of my 2011 rusted solid.... IMHO - soak with rust buster spray a day or two before, and do it again the first thing when you're going to do the job. I ended up busting that funky front part of the inner fender liner on the right side. ... ** that stupid J-clip retainer ** ... they really should have just used a fender washer and nut.
I noticed you change the headlights
How much will it cost for the new bumper
+Allyza the Ravenclaw We wouldn't be able to say here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1AAuto.com
Que tal, puedes mostrar como se cambia la bomba de limpiaparabrisas del la honda crv 2008 o 2009, gracias.
es facil podes remober el babero de la rueda dereche acompañante y esta aabajo la bomba es un cilindro del tamaño de una pila si es que no queres saacar todo el paragolpes saludos
Nifty
+Knight Templar Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c