AeroForce Interceptor Gauges & Pod Install 16-19 Camaro All Models
HTML-код
- Опубликовано: 6 сен 2024
- Installing the AeroForce Technology Interceptor gauges isn't difficult, but the pod sometimes can have a loose fit. This product fits all models of Camaro including the ZL1, SS, LT & LS with or without RS and 1LE packages.
Appearances By:
➤ JayzTwoCents - / jayztwocents
Product:
➤ AeroForce Interceptor - bit.ly/2OY3B0h
Note: You want the CN Series gauges
➤ AeroForce Gauge Pod Dual or Single: bit.ly/2vXMDXj
Subscribe:
➤ Hit this link to SUBSCRIBE and support the channel bit.ly/1Up8Mnd
Lethal Garage Store! (Support the Channel)
➤ Store Link: bit.ly/2rJLrCo
Amazon Link:
➤ Support Lethal Garage when you shop Amazon! Use this link to browse and shop: amzn.to/2KHClQr
Lethal Garage Synthetics!
➤ Use the same AMSOIL oil I trust: bit.ly/2wR2xFL
Codes from Supporting Vendors!
➤ Save 5% on select products via Phastek Performance by using LETHAL5 at checkout - bit.ly/2g7Cmix
➤ Save 5% on all ZL1addon parts and accessories with coupon code lethal5 - bit.ly/2gCQBzg
➤ Save 10% on all 6th Gen Gen5DIY Plug and Play Harnesses with coupon code Lethal10 - bit.ly/2BCF51T
SEND MAIL and it will be featured in my next vlog!
Lethal Garage
31915 Rancho California Rd ste. 200-444
Temecula, CA 92591
Social Media & Other Accounts!
➤ Official Lethal Garage Instagram: / lethalgarage
➤ Official Instagram: / lethal_camaro
➤ Official Twitter: / lethal_camaro
➤ Official Website: www.lethalgarag...
➤ Official Facebook: / lethalcamaro
➤ Official Facebook: / lethalgarageinc
Music:
➤ Track: Electro-Light - Symbolism pt.II [NCS Release]
➤ Music provided by NoCopyrightSounds.
➤ Watch: • Electro-Light - Symbol...
➤ Free Download / Stream: ncs.io/Symbolis...
Having been a longtime subscriber to both Lethal and Jay I haven't been alarmed by such an unexpected collaboration since the Jimmy Timmy Power Hour.
I have a 2017. I fit the gauge pod in before I ran the wires and there wasn't enough room to run the wires like you did. I ended up drilling a hole in the vent and ran the wires through that hole. The pod fit like a glove and was nice and tight
I just bought the gauges myself. So would you say that their method of install(no drilling) is what is causing the issue? This is a concern for me, so I'm wondering if doing it the "quick and easy" way is detrimental to fitment of the cluster. I'd imagine that if it were a 17+ issue that Aeroforce would have corrected the design 11 months later.
I'd like to see how you did the wideband also Matt.
i realize it's kind of randomly asking but does anybody know of a good website to stream newly released tv shows online?
@Archie Darwin Lately I have been using flixzone. You can find it on google :)
You can actually display 4 parameters on each gauge at one time.
I had the same issue with the pod , I bought your old one, I believe it doesn’t fit correctly on 17s and up , it does fit on a 16 , I know several people who have 17s and have the same issue , it’s the vent design on 17s and up
Hey bro love the videos! You're the best 6th Gen resource on RUclips, hands down! Question.... If you had to recommend 1 splitter, which would it be? I know it's personal opinion, but what would your choice be to recommend? Thanks in advance! 👍👍
I can’t just say one.... but.
GM Splitter
C7 Carbon CF Splitter
ACS Composites Splitter
Anderson Composite Splitter
LethalGarage thanks man..... Looking for some guidance. Don't wanna have any regrets.... Figured I'd ask the resource. 😁👍😎
Hey Mat, I had the same problem with my install a few days ago. The pod would sit tight. Seems it was the wires keeping it from clicking in place.As much as i didn't want to, I had to drill the hole in the vent tube to run the wires through like the directions say. pod is good to go now.
Not bad, I don't think it'll be much use for me tho, but I am getting a new spoiler and tint for my maro and later smoke the taillights
I'm curious how this works with the wideband and trying to use RTD or MPVI. Will the wideband still read if the aeroforce isn't plugged in while using the MPVI or RTD? I'm trying to remote tune and I know I need a wideband installed to do that. I hate to use a gauge just for AFR when I could potentially use the aeroforce and get way more out of the gauge.
Hope I get some kind of reply, I don't see a lot of information about this out there.
Thanks!
I just bought the dual gauges, 🤟🤟💯💯
CAMARO GANG how do you like them
@@DeterminedVeteran they are amazing , I recommen them 🤘🤙 graet product
Hey bud I purchased this guage for my boost level and it reads -21.07 but when you really get on it hard it then shows a +1.07 and suggestions on how to fix it
Cool Video Matt!!! 👍🏻👍🏻
Do they not offer the dual Guage pod anymore on their site? I only saw the single Guage pod? Would i need to go to a different site for the dual pod?
I recently added a AEM AFR wideband and used the single aeroforce vent pod. I have the same issue, fitment is not good, pod does not lock down in the vent. They must be having problems with their vent pod production. I have not gotten around to contacting them. Let me know if you hear something on this. Thanks
This looks extremely doable, about to save $400 haha. Would the air band be just as simple? I’m installing a boost gauge and air/fuel gauge from auto meter
Very good my bro keep up and love video 💯
Soo... What did you mean by the stock gauges are off???
Heather here, love your channel. I own an 17 2SS that I had painted pink (was red), she is a beauty. Ill be in southern cali in a few weeks for work, can you meet up for a drive along one night? maybe dinner? I don't know my way around there. hugs :)
We have plans to host a Lethal Garage soon, you’re more than welcome to come hangout.
Not the pod its plastic
The Aeroforce gauge did my car has 1000 miles on it was shooting out all kind of codes going down road I unplugged the gauge then it was back to normal
Do you recomend this for a 15 taurus sho
I just installed this gauge and gauge pod. This video was a big help. Thanks for it! My pod also did not fit well. It certainly didn’t snap into place. It sits out of the opening a bit. Did you guys come up with a fix? @lethalgarage
We filed the edge to sit better
Does it have a boost setting?
So you can install this without drilling a hole in the actual vent tube like the instructions recommend? FML..... Wish I knew that when I installed mine.
Off subject but I have a 2010 ss and I have a small oil leak around the oil cooler and or oil pan. Have you or any of your friends had this problem with the gen 6?
Rear main seal probaly
Hey Matt at 17:55 you mentioned that GM gauges are off for oil and coolant temperatures. Do you mean the readouts that you're given in the digital HUD? Is this a problem with 2016+ Camaros or just 2016/2017 Camaros?
Wideband install please
What does the duel gauge do that the single gauge doesnt as far as functions?
More info being present without having to hunt for it.
My pod will not sit flush also
The plug on back of gauge doesn’t snap good also this makes my 2018 1LE throws codes
A gauge pod can’t make your car throw codes.... it’s reading data off the ODB port.
LethalGarage sorry did not mean to post public new to the RUclips
I meant to reply the pin on my Aeroforce does not lock in good I redid install and got wire in a little bind so it don’t come loose , and will try that I do not want to ship it back to Aeroforce over it not locking in good
What function settings would the ethanol gauge be? I can't find it on the website.
Alcohol %
@@Lethalgarage and I would need an additional sensor to provide that option?
Do they make that cluster for the 5th gens??
Yes
When will you have more hats for sale?
Very soon
LethalGarage awesome!
Did you consider putting the gauges in pillar pods?
The avengers infinity war was the biggest crossover in hist..... oh wait...
fk yah Jayz2dents lol