I swear RUclips is more helpful than some dealerships/garages. I'm having this issue on the same side on my 2008 Jetta, mirror Is extremely loose 🤕.. somehow I have to get to the hardware store with the mirror intact and apply some glue before I can't and have to replace it completely lmao, wish me luck. l attempt the trip tonight
To more easily line up the glass and the backing, you can just snap out the backing. It just plugs into a few slots and has a couple of plug-in cables. Then after gluing the glass and letting it dry, just plug it back in.
Hi Ronald, Owning the SE trim Passat, the mirror shown in this video is in fact heated. It’s been 9 months since this solution has been posted and the mirror heats up just fine and remains in tact beautifully. Thanks for reaching!
Is your wing mirror heated? As in demister function? If so, does it work fine as normal post this fix? Just thinking if I can do the same on my Mazda CX9 that has the demister function and application of a glue between the glass/mirror and the back plate might impact that function..
You could have also used masking or painter tape to hold it up.. but yeah, just went through the wash and dried while drying the windows and came to the passenger side mirror, I found it was loose, so I need to find a video of how to take it off first.. lol.. This one, I think, clips on, but I can't find that video that I watched months ago and stumbled on it...
Mila, I recommend putting a shim between the mirror and the housing to center the mirror and avoid shifting. To be honest, I have not tried this so I cannot recommend it, but I have heard nail polish remover can remove adhesive glue. I would be hesitant and cautious with this however because it is an aggressive substance and can harm other components in the process.
Another option you have to remove the mirror and it’s backing from the housing, then you can remove the mirror glass from the backing with a plastic scraper. Here are instructions on how to remove the mirror glass and backing assembly: ruclips.net/video/PFoB7_JAh0k/видео.html
Great vid! Silly question, my bulb is out on the right side. Is it an easy fix or is it better to take it to a mechanic? I'm not very handy when it comes to cars haha.
@@sinfullsloth95 No worries, I haven't worked on that specific job myself, though I'm sure its readily available on the internet. I may give it a try in the near future though, stay tuned!
I swear RUclips is more helpful than some dealerships/garages. I'm having this issue on the same side on my 2008 Jetta, mirror Is extremely loose 🤕.. somehow I have to get to the hardware store with the mirror intact and apply some glue before I can't and have to replace it completely lmao, wish me luck. l attempt the trip tonight
To more easily line up the glass and the backing, you can just snap out the backing. It just plugs into a few slots and has a couple of plug-in cables. Then after gluing the glass and letting it dry, just plug it back in.
Thanks George, I just installed a new driver’s side mirror yesterday on my 2008 Passat. It was so easy just like you said!
Glad to hear it, Ronald!
Most useful video on RUclips
Thanks bro, my VW did the exact same thing. Good to go now
Did you just slap it on there or did you take off plate then apply? Because looks like i need to do this mine in flapping when I'm driving thxs
Thanks dude the glass just popped off on my beetle
Thanks helped me out!
I used super glue worked a treat 😊
George, what about if your mirrors are heated?
Hi Ronald,
Owning the SE trim Passat, the mirror shown in this video is in fact heated. It’s been 9 months since this solution has been posted and the mirror heats up just fine and remains in tact beautifully.
Thanks for reaching!
Is your wing mirror heated? As in demister function?
If so, does it work fine as normal post this fix?
Just thinking if I can do the same on my Mazda CX9 that has the demister function and application of a glue between the glass/mirror and the back plate might impact that function..
would not the reverse be true? As in: the heating will fuck up the glue?
Hey George, 11 months later, is it still attached?
John, I actually just traded-in the car last month. However, up until the day I traded the car in, the mirror remained firmly attached :)
You could have also used masking or painter tape to hold it up.. but yeah, just went through the wash and dried while drying the windows and came to the passenger side mirror, I found it was loose, so I need to find a video of how to take it off first.. lol.. This one, I think, clips on, but I can't find that video that I watched months ago and stumbled on it...
I glued the mirror but I leave straight away,,the next day I saw the mirror slide,,what can I use to remove the adhesive glue😬 thanks
Mila, I recommend putting a shim between the mirror and the housing to center the mirror and avoid shifting.
To be honest, I have not tried this so I cannot recommend it, but I have heard nail polish remover can remove adhesive glue. I would be hesitant and cautious with this however because it is an aggressive substance and can harm other components in the process.
Another option you have to remove the mirror and it’s backing from the housing, then you can remove the mirror glass from the backing with a plastic scraper. Here are instructions on how to remove the mirror glass and backing assembly: ruclips.net/video/PFoB7_JAh0k/видео.html
Great vid! Silly question, my bulb is out on the right side. Is it an easy fix or is it better to take it to a mechanic? I'm not very handy when it comes to cars haha.
Hey, no harm in asking haha are you referring to the headlights or taillights?
@@georgerammah The side-view mirrors haha. Sorry for the confusion
@@sinfullsloth95 No worries, I haven't worked on that specific job myself, though I'm sure its readily available on the internet. I may give it a try in the near future though, stay tuned!
It's too late now, but I think it's an easy fix. I changed my side view mirror lights to sequential lights and it was straightforward for me.
@@amhr58 Too late? Maybe the fact that they didn't react, means they fixed it...??
It's 12 dollars for a new and would take just as long to replace instead of glue