A video showing the replacement and fitting of the plastic rail for an aluminium one. Part 2 will be some pellet grouping. Visit channel@PlentyPastimes & @Jon Finlayson
@@colinlofthouse373 hi Colin thanks for the comment/question. My vixen is over 2 years old and I’ve heard that the new vixen shroud has had thread lock applied to the shroud. You should be able to unscrew the shroud by applying pressure anti clockwise until the thread lock seal is broken. I’d maybe try a little heat on the shroud first, using a hair dryer. Give that a try first
Hi mate i had same problem with removing mine if you get someone to hlod your gun on bottle and grip and you come to front ov your gun put a on your end stoud cover and outher hand on shroud and squeeze and twist anti clockwise with both hands it will come loose there a pain at first but it will come loose pal
Thank you for your comment, like many others when holding the rail towards the front of the rifle when shooting it was changing the POI so with the new rail having no flex there should be. No POI change
@@adey1771 hi there thanks for your comment. I would say yes it has. I will hopefully uploading the 2nd part today to show the groupings. I did record it the other day but for some reason the sound didn’t record so I’m re-doing it today 👍
Hi Jon I have an agt vixen short and I can't seem to remove the shroud can you tell me how I do this many thanks colin Lofthouse
@@colinlofthouse373 hi Colin thanks for the comment/question. My vixen is over 2 years old and I’ve heard that the new vixen shroud has had thread lock applied to the shroud. You should be able to unscrew the shroud by applying pressure anti clockwise until the thread lock seal is broken. I’d maybe try a little heat on the shroud first, using a hair dryer. Give that a try first
Hi mate i had same problem with removing mine if you get someone to hlod your gun on bottle and grip and you come to front ov your gun put a on your end stoud cover and outher hand on shroud and squeeze and twist anti clockwise with both hands it will come loose there a pain at first but it will come loose pal
Do you have a video on how to install the armor of this visen gun?
@@trau9346 thanks for your comment , the video showed me attaching the metal rail. It’s only 2 screws into the block and that’s it basically 👍
Were you getting a problem with the dipod as it's set on the picatinny rail ,or just holding the shroud rail ?
Thank you for your comment, like many others when holding the rail towards the front of the rifle when shooting it was changing the POI so with the new rail having no flex there should be. No POI change
Did changing to the metal rail sort the poa problem out ? Ps enjoy your vids 👍 6:58
@@adey1771 hi there thanks for your comment. I would say yes it has. I will hopefully uploading the 2nd part today to show the groupings. I did record it the other day but for some reason the sound didn’t record so I’m re-doing it today 👍
Where did you order the metal guard?
Thank you for your reply. I ordered mine from Vector Air and it was with me within a few days. Top service
Jon 😊
Do you have a video on how to install the armor of this visen gun?