great video! just replaced my wifes on her 2010 that blew. Lexus dealer gave us a discount on parts after telling them the situation/year. This shouldve been recalled but oh well.... Video was super helpful. I would recommend pulling more studs if you have clearance issues. Its easy enough to pop them back in. All in I'd say 1hr-2hr job
Like you said, those rubber coolant pipe are notorious for breaking after a while and the oil will just leak out and ruining the engine. Glad you got it done. Those Lexus at that generation is of good quality except for that one part. Glad you changed it to the metal!
This is why I don't like Lexus service anymore. They will replace this for free if it is still under warranty period. The catch is if you knew about it.
I remove the bolts from the studs and upon re-assembling a stud I over torque one of the studs with a 6 mm socket, causing the sump pan housing area to break now I got a replace the sump pan. careful cross threading here because it’s tricky and it’s a tight area.
What size and length 12mm socket did you use for that bottom bolt on the stud on the right side? I just got a gearwrench 1/4 inch mid length socket set, but im not sure if the hole in the socket is large enough for top of the stud. Probably a 3 /8 mid length socket would have a large hole so it would not bottom out.
Sorry about that. Here it is. www.ebay.com/itm/203310597386?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=eA7DYX_PTCq&sssrc=4429486&ssuid=Sp2kcc-2SwO&var=&widget_ver=artemis&media=COPY
Thanks I saw that too when i removed mine I used this : DICMIC Engine Oil Cooler Hose Line Lower Pipe Assembly from amazon got it used/new for 22 dollars had to bend a little but it worked ty for your knowledge
@@SuburbanRanch My name is Bill and I work for AUXITO. I'm currently the head of marketing. We were founded in 2016 and specialized in high performance LED bulbs for cars and trucks, We also offer automotive floor mats, aftermarket headlights, and lighting kits for certain models. email is?
great video! just replaced my wifes on her 2010 that blew. Lexus dealer gave us a discount on parts after telling them the situation/year. This shouldve been recalled but oh well....
Video was super helpful. I would recommend pulling more studs if you have clearance issues. Its easy enough to pop them back in. All in I'd say 1hr-2hr job
Great video! Camera work and explanation were excellent, just what I needed! Thumbs up, many thanks!
Excellent Video! I am glad i had all the tools you recommended they were definitely needed!
Like you said, those rubber coolant pipe are notorious for breaking after a while and the oil will just leak out and ruining the engine. Glad you got it done. Those Lexus at that generation is of good quality except for that one part. Glad you changed it to the metal!
This on my vehicle was only concern
This is why I don't like Lexus service anymore. They will replace this for free if it is still under warranty period. The catch is if you knew about it.
Great video! Thanks!
I remove the bolts from the studs and upon re-assembling a stud I over torque one of the studs with a 6 mm socket, causing the sump pan housing area to break now I got a replace the sump pan. careful cross threading here because it’s tricky and it’s a tight area.
Yikes, sorry to hear that!
they are dam tight , i had to cut a 12 mm deepwell in half to get one bolt and yes remove studs to onstall new one
What size and length 12mm socket did you use for that bottom bolt on the stud on the right side? I just got a gearwrench 1/4 inch mid length socket set, but im not sure if the hole in the socket is large enough for top of the stud. Probably a 3 /8 mid length socket would have a large hole so it would not bottom out.
I can’t recall if it was 1/4 or 3/8 drive, I would recommend having both on hand!
Have any videos on replacing motor and transmission mounts? 1992 k2500 5.7 4x4. Thanks
We don’t. Sorry.
good, concise, not too much talking, great. Whats the part number?
Sorry about that. Here it is. www.ebay.com/itm/203310597386?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=eA7DYX_PTCq&sssrc=4429486&ssuid=Sp2kcc-2SwO&var=&widget_ver=artemis&media=COPY
@@SuburbanRanchdo you know if the 2013s RX350 had rubber hoses or were they upgraded from the factory?
@accobra4272 2013 should already have the metal lines. I believe 2012 was the first year with metal lines.
@@SuburbanRanch ok thank you!
THANK GOD! I recently got the 2012 and at least I don't have to worry about this @@SuburbanRanch
Where could I find new bolts for this part? The bolts I have are rusted and stripped
Any hardware store
Question: how do you know that the protrusion on the gaskets face the pipes? can't find that anywhere else ty
I compared it to the original that I removed.
Thanks I saw that too when i removed mine I used this : DICMIC Engine Oil Cooler Hose Line Lower Pipe Assembly from amazon got it used/new for 22 dollars had to bend a little but it worked ty for your knowledge
Any reason to not replace studs with bolts?
No need to!
Will this drain all of the oil and i have to replace oil after install?
I did it during an oil change. I don’t think you would lose all of the oil, but you will certainly lose some and need to top it off.
Does this affect the 2013 model year Lexus rx350
I think it was fixed by 2013
What’s the Lexus part number for the metal replacement part? Thanks!
There’s a link to it in the video description.
@@SuburbanRanch 🙏
What is removing and replacing time
3hrs but we went kinda slow
Thanks
How much oil is lost during this upgrade?
Not sure, I changed the oil at the same time.
From what I hear, it's about 1/2 to maybe a quart. 👍 Thanks.
Afternoon Buddy! Interested in collaborating on some product review projects?😊
Sure, what do you have?
@@SuburbanRanch My name is Bill and I work for AUXITO. I'm currently the head of marketing.
We were founded in 2016 and specialized in high performance LED bulbs for cars and trucks,
We also offer automotive floor mats, aftermarket headlights, and lighting kits for certain models. email is?
Ok. Email is suburbanranch18@gmail.com