I bought the OE-Fit sensor from Rock Auto for our 2013 Escape. The windshield wipers were acting erratic.. not moving sometimes and not always resetting to thier off-position (which made it hard to reset the wiper blade locations ) according to the window blade location marks (an important step for the Escape, see other RUclips videos on this) after changing the battery. After changing this sensor assembly, both wipers worked and reset reliably to thier off-position location. Fingers crossed. Thank you for sharing your thought process and for showing the wiring diagram logic.
Thank you for your video. I truly believe everyone who changed their own battery pretty much has or had this problem. My wife called Ford to see how much to put in a new battery was they quoted $500+ dollars of course I said that was insane. So I as a mechanically inclined person did some research and did it myself at the cost of a new battery ($120) and did the battery change myself. Well everything worked perfectly for two weeks until one day my wife got caught in some rain and the wipers didn’t work. Well again she called Ford this time it was a quote of $1000+ dollars to repair the car again insanity. Again I did my research and did exactly the same steps that the mechanic in the video did and came to the conclusion that it was either dead motors or the BMS. Well it was the BMS. I feel the engineer who designed this car knew what he was doing when he designed this part of the car. He knew that any man with a set of tools and a little bit of knowledge of cars would loose his mind at Ford’s quote of a battery change and do it himself and then Ford kicks up the quote to get the wipers working again and doubles their money. I can bet Ford has made millions off this simple repair that should have never have happened in the first place if the car was designed by an engineer who would knowingly not let a problem like that even reach the assembly line. That is a terrible thing that Ford knowingly let that design flaw hit the market and people all over are paying hard earned cash on repairs that never should happen. BAD on Ford no wonder some people say Ford means Found-On-Road-Dead!!!! I am one pissed off Ford owner and this little hiccup Ford let slide out the factory door knowingly has a lifetime Ford owner thinking that his generational family of Ford ownership most likely ends with this poorly designed car!!!
Many Thanks! Muchas gracias!! Superb! Thanks for showing your process of step by step diagnosis and wiring diagram. The wipers on my 2017 Escape stopped working and I was lucky enough to click on your link. After running your tests I bought the OE cable from Fraud for too much money but they had it in stock. Fixed my problem. I am grateful to you.
2014 ford focus as well. I am literally trying to figure how 2 motors went out on my daughter focus and by chance checked online and found this I will be checking out the sensor tomorrow when I go back. I did the fuse check first and in my mind that's the only thing other than motors not getting power and I don't know how they wouldn't if fuse is good. I've never never seen 2 motors just burn out all of sudden
Mine work but they just randomly come on and don't shut off. I was looking in the manual for the fuse location to just take it out as a temporary fix but the Manual only showed rear wipers. Thanks for the video
Ive been digging for months trying to find something about this. Look like ive got some testing to do! We had this problem till we replaced the battery and now the problem had reappeared! Maybe this will be our mystery solution!
Thank for sharing meticulously troubleshot job. Do you know how to test the signals from the Battery Monitor Sensor and/or the Body Control Module other than trial & error a new part? Have the same issue but, in my case, changing the BMS did solve the dead front wiper motors (rear wiper & pump motors both work well) as per the schematic BMS has 3 signals, a ground internally linked to a negative connection via the battery terminal and the two signals, you pointed out,: white goes to the motors and paralleled to the BCM and red/violet to the BCM.
I like the challenge. When I get problems like this one I don’t stop till I get it right. A lot of my knowledge for diagrams and computer diagnostics come from school UTI. I highly recommended it for anyone that wants to get into this field
@@Hemi345miguel Que bueno Que te sirvo mi vídeo. Si talvez ago uno pero primero necesito crecer este canal. Me ayudan mucho cuando le dan like y se suscríben. Gracias por tú apoyo
I have this friend his wipers don’t work on a 2012 ford focus. I replaced the wiper motors, the switch, I checked the fuses. But tomorrow morning I will check the sensor
@@NicholasGotel if it’s the sensor on the ground it shouldn’t be much. You can buy the part at the dealership and install it yourself. Or just pay someone to do it
no need for reset, the previous battery was leaking acid and corroded the negative battery terminal damaging the sensor, nobody's fault but an old battery sulfating
@@antonioaguirre6166 I understand I am having the same issue on my car I checked all the fuses, wiper motor, electricx all good I even changed the damn indicator/stalk nothing worked I hope the cable will help me out if not I will take it to a mecanic. If that's my issues I saved so much money 💰
They do have their faults but I think I covered most of the issues on these cars on my videos. Once you fixed them they run good. Just keep up with the maintenance and they last longer
![Lethal Company Music Video 🎵 "Follow The Orders" [VERSION A]](http://i.ytimg.com/vi/QeooZB4Z7RA/mqdefault.jpg)
This fixed my 2013 escape! Had wiper problems and this video solved it. It was the ground cable with sensor. THANK YOU!!
@@threatcore I’m glad for you. Thank you for watching
I bought the OE-Fit sensor from Rock Auto for our 2013 Escape. The windshield wipers were acting erratic.. not moving sometimes and not always resetting to thier off-position (which made it hard to reset the wiper blade locations ) according to the window blade location marks (an important step for the Escape, see other RUclips videos on this) after changing the battery.
After changing this sensor assembly, both wipers worked and reset reliably to thier off-position location. Fingers crossed.
Thank you for sharing your thought process and for showing the wiring diagram logic.
you are welcome, thank you for watching. like and subscribe it helps me
Thank you for your video. I truly believe everyone who changed their own battery pretty much has or had this problem. My wife called Ford to see how much to put in a new battery was they quoted $500+ dollars of course I said that was insane. So I as a mechanically inclined person did some research and did it myself at the cost of a new battery ($120) and did the battery change myself. Well everything worked perfectly for two weeks until one day my wife got caught in some rain and the wipers didn’t work. Well again she called Ford this time it was a quote of $1000+ dollars to repair the car again insanity. Again I did my research and did exactly the same steps that the mechanic in the video did and came to the conclusion that it was either dead motors or the BMS. Well it was the BMS. I feel the engineer who designed this car knew what he was doing when he designed this part of the car. He knew that any man with a set of tools and a little bit of knowledge of cars would loose his mind at Ford’s quote of a battery change and do it himself and then Ford kicks up the quote to get the wipers working again and doubles their money. I can bet Ford has made millions off this simple repair that should have never have happened in the first place if the car was designed by an engineer who would knowingly not let a problem like that even reach the assembly line. That is a terrible thing that Ford knowingly let that design flaw hit the market and people all over are paying hard earned cash on repairs that never should happen. BAD on Ford no wonder some people say Ford means Found-On-Road-Dead!!!! I am one pissed off Ford owner and this little hiccup Ford let slide out the factory door knowingly has a lifetime Ford owner thinking that his generational family of Ford ownership most likely ends with this poorly designed car!!!
Many Thanks! Muchas gracias!! Superb! Thanks for showing your process of step by step diagnosis and wiring diagram. The wipers on my 2017 Escape stopped working and I was lucky enough to click on your link. After running your tests I bought the OE cable from Fraud for too much money but they had it in stock. Fixed my problem. I am grateful to you.
you are very welcome. that's awesome, I'm glad it was helpful for you, like, share and subscribe it helps the channel.
Thank you! Changing the battery is a challenge on the model. Windshield problems even worse. Thanks.
You're welcome! Iam glad it was helpful for you, like, share and subscribe it helps the channel.
Great Job in solving the mystery, I had the same problem and thanks to this video I was able to fix it. Thanks a lot 👍🏻
You’re welcome. I’m glad I was able to helped you. Thank you for watching, like,share and subscribe it helps my channel
This title should include 2013-2019 Ford escapes as they have the same wiper motors across the entire generation.
Good to know
I have not work on a 2018 nor 2019 yet. Thank you for the info
Could it be that the previous battery cable was,nt tight enough and that was the cause of the batterysensor getting hot due to high resistance
@@vins0916 yes that’s a possibility. I seen it happened before however in this case the old battery was leaking acid.
2014 ford focus as well. I am literally trying to figure how 2 motors went out on my daughter focus and by chance checked online and found this I will be checking out the sensor tomorrow when I go back. I did the fuse check first and in my mind that's the only thing other than motors not getting power and I don't know how they wouldn't if fuse is good. I've never never seen 2 motors just burn out all of sudden
Mine work but they just randomly come on and don't shut off. I was looking in the manual for the fuse location to just take it out as a temporary fix but the Manual only showed rear wipers.
Thanks for the video
you are welcome, thank you for watching
Ive been digging for months trying to find something about this. Look like ive got some testing to do! We had this problem till we replaced the battery and now the problem had reappeared! Maybe this will be our mystery solution!
good luck with your project, like and subscribe it helps the channel.
@@antonioaguirre6166 🫡🫡 appreciate showing the wiring diagram and the whole process
Thank for sharing meticulously troubleshot job.
Do you know how to test the signals from the Battery Monitor Sensor and/or the Body Control Module other than trial & error a new part?
Have the same issue but, in my case, changing the BMS did solve the dead front wiper motors (rear wiper & pump motors both work well)
as per the schematic BMS has 3 signals, a ground internally linked to a negative connection via the battery terminal and the two signals, you pointed out,: white goes to the motors and paralleled to the BCM and red/violet to the BCM.
You are welcome, I’m glad you like it. I have not done it but I’m sure I can figure it out.
Thank you for watching. Like and subscribe to support the channel
is this the case if the back wiper work and the font one don’t i replaced the front motor nd it still not working
yes, the back wiper is independent from the front wipers, the motors in the front are independent from one another but share the same signal
Super!!! Enjoyed your approach for systematic elimination.
I am glad you like it. l hope this was useful for you. like and subscribe it helps the channel.
Great elimination video,thanks for showing entire process 👍
Thank you for watching like and subscribe it helps
Thanks my friend I have already fix my trouble with the wipers
After expense time and money
Thanks so much
No problem 👍I'm glad I can help.
Excelente ! Análisis, diagnóstico y resultado!
Dios te bendiga!
@@ibcrenacimiento7478 muchas gracias
Very smart my friend
Are you in or near Austin by chance? I have the same problem on my 2015 Escape and would love to hire you to fix it
Thank you I appreciate it
I am located in Texas city which is about 3 hours from Austin. You are welcome to bring your car here if you are interested
U save me a lot of money thanks buddy
I’m glad I can help
You are a genius! Thanks.
I like the challenge. When I get problems like this one I don’t stop till I get it right. A lot of my knowledge for diagrams and computer diagnostics come from school UTI. I highly recommended it for anyone that wants to get into this field
Thank you for the compliment
Muchas gracias!! Buen descarte de la falla 👍🏽
Que bueno que te gustó Hojala te ayudo. Like and subscribe
You help me a lot. ❤ deberías. Hace e otro. Canal en español
@@Hemi345miguel Que bueno Que te sirvo mi vídeo. Si talvez ago uno pero primero necesito crecer este canal. Me ayudan mucho cuando le dan like y se suscríben. Gracias por tú apoyo
Very informative, thank you
You’re welcome
Like and subscribe it helps
Thanks, this is very helpful video.
Glad it was helpful! you are welcome, thank you for watching like, share, and subscribe it helps the channel
Cual es el nombre del sensor que va en el poste del negativo .? Y gracias por el video
Battery monitoring sensor pero si pides el cable para el negativo ya viene incluido. El sensor no se vende por separado
You are Awesome thanx for sharing thumbs up 👍
I am glad you like it. I hope this information was useful to you. like, subscribe, and share. It really helps.
Thank you so much you are the best
You are welcome! I’m glad it was helpful for you. Like and subscribe.
Great video!👍 I got that far I they still don't work . My battery is about 4 or 5 years old so I guess I'll try that next.
I’m glad you like it. Thank you for watching. Like and subscribe. Good luck with your project
Thank you. I’m gonna do this. I’ve tried everything but the censor Thank you
you are very welcome, good luck on your project. like, share and subscribe it helps the channel.
thank you soo much my friend you help me alot
Glad to hear that, you are very welcome, good luck with your project. like share and subscribe it helps the channel
Fue una gran clase de electricidad automotriz mil gracias
que bueno que te gusto. dale like y subscribete a mi chnal para ayudar a crecerlo
I have this friend his wipers don’t work on a 2012 ford focus. I replaced the wiper motors, the switch, I checked the fuses. But tomorrow morning I will check the sensor
I’m not sure if they are the same. I haven’t work on a ford focus before
thanks a lot, had the same kind of probleme
You're welcome!, sorry for the slow response
Hello sir, can you please with simple and short guide to disarm anti-theft alarm on ford escape 2015, its so irritating especially at night
@@kalamanliejuwara8506 is this a factory alarm or aftermarket? Cuz factory alarms are integrated into the body controls module
Great video!
Glad you enjoyed it, thank you for watching like and subscribe it helps the channel.
FORD FUSION 2018 TIENE LA MISMA FALLA , SERA EL SENSOR DE BATERIA???
Son muy similares. Tiene también los motores independientes? O es tradicional como los otros vehículos
good helpful video
I am glad it was helpful for you, thank you for watching, like and subscribe
Hello. Do you recommend anyone in the Atlanta ga metro area.
@@NicholasGotel I do not know anyone up there. Sorry about that
Gotta watch video over and over. I'm not a car guy. So, how much you think it would cost.
Also, can I send you a video of what it's not doing.
@@NicholasGotel if it’s the sensor on the ground it shouldn’t be much. You can buy the part at the dealership and install it yourself. Or just pay someone to do it
@@NicholasGotel sure send it
will this work with a cmax
I am not sure on the cmax I've never work on it
I hope this works for my 2013. Gonna try this
If you have a bad battery terminal and you follow my instructions you should be able to get it right.
It worked for our 2013 Escape.. and I hope it works for you. See my post above for some extra info.
cual debe ser el voltaje de la señal del de 4 pines porque ahi tengo 5v y en el de 3 pines 12v y ningun motor funciona
No me recuerdo pero deja te lo busco
Buen trabajo hermano
Ya cambie el cable con sensor y aun no trabajan los wipers...fusible esta bueno 😢
@@uc2low y checaste power y señal hacia los motores del windshield
Gracias mucho senor
Antonio thanks I had the same problem..
that's awesome, I'm glad my videos are helping you guys. take advantage this information is free. it took me years to get good at it.
like and subscribe
Guy who installed the battery should have done a bms reset and would have fixed the issues.
no need for reset, the previous battery was leaking acid and corroded the negative battery terminal damaging the sensor, nobody's fault but an old battery sulfating
@@antonioaguirre6166 I understand I am having the same issue on my car I checked all the fuses, wiper motor, electricx all good I even changed the damn indicator/stalk nothing worked I hope the cable will help me out if not I will take it to a mecanic. If that's my issues I saved so much money 💰
Is there any way to test that sensor before going out and buying it?
I didn’t even try. I tested everything else and that’s how I concluded the sensor was bad. I’ll try next time
Any updates on this ?
@@martingauvin6598 the windshield wipers are working properly
Como puedo checar que aya continuidad del sensor del cable negativo a donde va???
Sigue el diagrama que puse ahí
Mira el vídeo y ponle pausa ahí se ve a donde va creo. Ya me recuerdo bien 🤣. Por eso hago los vídeos porque siempre se me olvida
Wat if it move while it up then once you put the wipers down the don’t move
it's probably making a false contact at the ground.
Great job.
Thank you, like and subscribe it really helps.
very nice ❤
Thanks 😊 sorry for the late response
@@antonioaguirre6166 no problem at all keep doing the great work God bless you.
Muchas Gracias
Tienes canal en español Antonio?
no tengo, quise hacer unos videos en espanol pero no pegaron, y tambien no se mucho de terminologia en espanol, todo lo aprendi en ingles
porque la pregunta? en que te puedo ayudar
Same thing for a ford focus.
Good to know. I usually don’t work on focus. Thank you for watching like and subscribe
Como se pide el sensor o cable
Cable para la Tierra. Creo que puse el número de parte en el vídeo
i’ll. this be the case with a cmax aswell
do the cmax has independent wiper motor like the escape?
@@antonioaguirre6166 2014 just one yeah
I'm so feed up with mu ford kuga paid 8k pounds 1 month ago now dame mother as these gone
Was a new model trainer in the factory for a major car company, would not want you as my mechanic
Good to know. Thank you for watching like and subscribe
2017 Escape is pure shit. I hate mine.
They do have their faults but I think I covered most of the issues on these cars on my videos. Once you fixed them they run good. Just keep up with the maintenance and they last longer
Part number F1FZ 10C679 E