Buried my father in law yesterday. Was a nice ceremony. I sang him Johnny Cash style "Aint No Grave" song. I think he'd enjoyed it if he was here. I had just showed him all your guys channels a couple months ago and he said he really enjoyed your videos and commentary Bill. He was def a Fan Man. You guys helped him thru some hard times until his body couldn't take it anymore. No more pain, no more kidney transplants. Only Resting in Peace in the Boosum of the Creator. 😎🕊🇺🇲🏁
Got my street 67 Nova in the 10’s this weekend! Ran 10.75 126mph… Pump gas 93 Dart block 406sbc, 550 lift hydraulic cam, 200R4 transmission, Stereo, Power steering, A/C, 5 seats, power brakes, full 2.5 inch exhaust… very Happy with it. Maybe I’ll try out some of your awesome nitrous tips on my 427sbc for my 65 Chevelle that I ordered your custom OMG Isky cam for👍😎
Just subbed to your channel. I love a 23° traditional small block that can RUN. I'm dropping my 421 SBC in my S10 on my channel now. I had it in my 70 nova on E85 for a while. Now it's going in my truck I got my driver's license in back in 2001. It'll have a kit on it as well. Look forward to seeing your cars.
This channel is an absolute trip!!! When you're having a halfway kinda day just stop in and check The Old Man's Garage, sit back and get ready for your face to get numb from laughing... love you all!!
SRC. Billy and Tommy's channel together and Gen II Garage. Tommy and Alison's channel if you like The old man's garage your going to like these other 2 channels for sure
Love your videos and those puppies put a smile on my face every time I see them. Awesome you take them places you go.❤🐕🐕❤️ Love that gas tank in that truck but better get a cap for it that locks in case someone steals gas or just walks up and loosens it or removes it without you knowing.
Bill , For the correct Speedo gear and clip look up A & Red's transmission parts. There are some differences on the shafts , gears and retaining clips. The guys are knowledgeable ( at least the Wichita location ) . I tried to post the phone numbers directly but it got immediately censored . Anyway good luck buddy. John.
The motorcycle tank sealers available through Eastwood would probably help suppress your add-on tank internal grit / rust at least in the short-term. Cleaning out the inside by shaking it with some small lengths of chain inside prior to sealing, and some rust conversion / stripper OR muriatic-acid are good prep methods before sealing.
Better not let Jeremy find out that Mid West Street Car’s Jackie made an Uncle Bucko/ lack of maintenance reference in one of their recent videos or he might get the big head. 😆
OH MY GOSH, I WAS LAUGHING AT JEREMY SCHOOLING THE BROKEN DOWN YOUNGSTER THAN SEEING THING ONE AND TWO WITH DEER IN THE HEADLIGHT LOOK BEING SIDE BY SIDE, SO HILARIOUS 😂🤣 Made my day, thanks 👍
Loved Da Pad video Bill, you really captured the essence of what racing should be about. Family, friends, and having a good time making memories that’ll last a lifetime. 👍✌️
sorry for your loss redeyed, i just lost my dad(pop's) he was 85 ,and passed doing what he loved working in his shop on his rollback , i know the pain of KCD, I just got my first kidney transplant ,
It's time for us viewers to find the deals for OMG garage build. I also know convincing him to take it would be another hurdle. The man has pride and works for his things.
Hopped on youtube to watch a vidya or two quick before supper and what a treat this is!! So pumped for what yall get into this year. Best channel on youtube!! 🍻🇺🇸💚
I just heard Billy saying he wants to hit Dave Pearsons race in Delaware! We've been wanting to see you guys for years but I can't travel too far with my Neck until after my surgery. We would love meeting you and Vicki close to home. Cecil County Drag Strip is 5 miles away but I can travel to Del-Mar.
My guess is the speedometer cable has a tight bend in it , or something else that is causing too much resistance, or it could even be the speedometer head. It has to be one or the other.
When we installed an auxiliary tank in the bed we added a 12V 3/8” solenoid valve so when the primary tank was at a 1/4 tank we flipped the switch and let it fill the primary instead of a T
Safe travels Bill. We’ve got our local track opening at beginning of Feb down here in Okc! And Outlaw Armageddon in July this year. Be good to have all you guys down for OA for sure! It’s a fun weekend
Man I been missin all you guys. I know you've been busy and I ain't necessarily complaining I'm just saying..... I been missin your videos. Brightens my day right up. Can't wait to see what the 421 does. High 9s????
I would think that there is something bending the cable causing the retainer to snap off. I would look at the routing of the cable and maybe check the gauge itself.
Be sure and tell Kenny and uncle bucko to change that rubber brake line on the jeep, I've had a similar problem years ago and that line was acting like a check valve only working when the brakes were applied, not letting fluid to release back. Had me scratching my head after it did the same thing again.
FYI. last time I had issues like that on a TH700R4 it was because I was got a gear out of a manual transmission. It looked like the right gear but it was to loose and would not hold the clip in place. Good Luck!
My son wants a nitro rc so bad, he's been working so hard in school he deserves one that's forsure. Hopefully one day soon I'll be able to afford one for him to have fun with.
I’d definitely take one of those trucks on the shelf!! Preferably a 1967-1972 Chevy pickup or blazer!!! I’m definitely really big into those years and would definitely love a Remote controlled one for sure so that I can run it around in my 60’x80’x16’ shop!!! I could came up with an awesome track inside it!!! Awesome video buddy and remember keep up all the hard work buddy!!!!
Always love watching before I go to work....from one ohio guy to another I cant w as it for thos cold weather to end and bill i have a few questions about my jeep Cherokee XJ can you help...keep up the great work man
Hope you went ahead and changed the break line that goes to the caliber from the hard line at the frame. It was sucking the line closed and would make the pads rub just like that
Hey buddy glad to see you guys again really injoy your video from last week the ole car is coming around pretty good be safe and keep on keeping on going faster God bless you and good night from Oklahoma home of the 405
Buried my father in law yesterday. Was a nice ceremony. I sang him Johnny Cash style "Aint No Grave" song. I think he'd enjoyed it if he was here. I had just showed him all your guys channels a couple months ago and he said he really enjoyed your videos and commentary Bill. He was def a Fan Man. You guys helped him thru some hard times until his body couldn't take it anymore. No more pain, no more kidney transplants. Only Resting in Peace in the Boosum of the Creator. 😎🕊🇺🇲🏁
Rest in peace .
@@ryanwhite4912 thank you Buddy 😎
Rest in peace, sir. I'm so sorry for your loss. Prayers for you and your family....
@@davidwarren9738 thank you David😎
Sorry for your loss man my dads getting up their now and I just can’t imagine the day he’s no longer here
OMG too funny Mark blowing dust at Uncle Bucko!!!!
Got my street 67 Nova in the 10’s this weekend! Ran 10.75 126mph… Pump gas 93 Dart block 406sbc, 550 lift hydraulic cam, 200R4 transmission, Stereo, Power steering, A/C, 5 seats, power brakes, full 2.5 inch exhaust… very Happy with it. Maybe I’ll try out some of your awesome nitrous tips on my 427sbc for my 65 Chevelle that I ordered your custom OMG Isky cam for👍😎
Put a 3 inch exhaust it will prolly pick up a little bit more.. but still a good time 💪🏻
I second that
The car may go like low 10.5s
Nice!
Just subbed to your channel. I love a 23° traditional small block that can RUN. I'm dropping my 421 SBC in my S10 on my channel now. I had it in my 70 nova on E85 for a while. Now it's going in my truck I got my driver's license in back in 2001. It'll have a kit on it as well. Look forward to seeing your cars.
This channel is an absolute trip!!! When you're having a halfway kinda day just stop in and check The Old Man's Garage, sit back and get ready for your face to get numb from laughing... love you all!!
Yes I put on his videos and seem to forget about things that I’m stressing about
I can say this as a fact.. This family (all 3 channels) has us fans spoiled to getting more than 1 video a week
@@chadlavoie8609 what are their other 2 channels? I’m glad I’m not to far in on this video and have fair amount yet to watch.
SRC. Billy and Tommy's channel together and Gen II Garage. Tommy and Alison's channel if you like The old man's garage your going to like these other 2 channels for sure
SRC = Street Racing Channel
Love your videos and those puppies put a smile on my face every time I see them. Awesome you take them places you go.❤🐕🐕❤️ Love that gas tank in that truck but better get a cap for it that locks in case someone steals gas or just walks up and loosens it or removes it without you knowing.
Sounds like it's time for the big shop build 💪
Today... Rags
Tomorrow... Summit Racing
Mark will soon be the Parts Emperor!!!
Dope content . I found this while listening to the song “Dupe- Gangsta “ 🥵🥵
I watch everything you’re family post and enjoy all of them I just recently got my wife started watching and she loves it also
Thank y’all
My wife too. Means I have to wait to watch now. 😡🤣🤣
@@FarmsVilla
But that makes it even more special
Bill ,
For the correct Speedo gear and clip look up A & Red's transmission parts.
There are some differences on the shafts , gears and retaining clips. The guys are knowledgeable ( at least the Wichita location ) . I tried to post the phone numbers directly but it got immediately censored . Anyway good luck buddy.
John.
Stay safe, on your trip,, can't wait to see what the Malibu does..love your channel..
The Malibu looked good in that first round win 😎
The motorcycle tank sealers available through Eastwood would probably help suppress your add-on tank internal grit / rust at least in the short-term. Cleaning out the inside by shaking it with some small lengths of chain inside prior to sealing, and some rust conversion / stripper OR muriatic-acid are good prep methods before sealing.
Better not let Jeremy find out that Mid West Street Car’s Jackie made an Uncle Bucko/ lack of maintenance reference in one of their recent videos or he might get the big head. 😆
Haha! Jackie is the bomb
Man that open trailer Malibu behind the Chevy just looks clean 🧼
Time for an addition to the shop
We use a sealer coating inside the tanks on the antique tractors we restore seems to work well.
Safe journey Bill looking forward to seeing the Malibu making hits and seeing the time slips. God bless and as always be safe 👍
OH MY GOSH, I WAS LAUGHING AT JEREMY SCHOOLING THE BROKEN DOWN YOUNGSTER THAN SEEING THING ONE AND TWO WITH DEER IN THE HEADLIGHT LOOK BEING SIDE BY SIDE, SO HILARIOUS 😂🤣 Made my day, thanks 👍
Loved Da Pad video Bill, you really captured the essence of what racing should be about. Family, friends, and having a good time making memories that’ll last a lifetime. 👍✌️
sorry for your loss redeyed, i just lost my dad(pop's) he was 85 ,and passed doing what he loved working in his shop on his rollback , i know the pain of KCD, I just got my first kidney transplant ,
By far my favorite channel on RUclips!! Keep up the good work.
Good luck and be safe. Thanks for thinking of your subscribers with the give aways.. We appreciate it !!
Good luck Bill, safe travels! Should be a hell of a time with the Walsh’s!
Love OLD MAN GARAGE KEEP UP THE GOOD WORK!!!!
The rag company has some nice towels for detailing that's what I use on my trucks not shop towels
Mark's smart seeing how uncle Bucko is ALWAYS on the Rag.🤣😂🤣
I love love your comment.
Hi Bill good luck with your testing.
I used a Classic Instruments instrument panel and Sky Drive GPS speedo driver in my old 62 C10; works great!
Safe travels sir, can't wait to see what she runs.
Be safe Bill!!! Have a good time!!!👍👍👍
@The_OldMansGarage.. send me that carb!!!
Becareful with the shopVac we had a local guy burn down his shop doing that. The fumes ignited in the Vac. Keep up the great videos!
Safe travels Bill. I’m sure you will post as soon as you can. Glad you have some help coming.
It's time for us viewers to find the deals for OMG garage build. I also know convincing him to take it would be another hurdle. The man has pride and works for his things.
Safe travels Bill! Enjoy most of all! ✌ 🇺🇸
Great vid, love the '64 😍
Hopped on youtube to watch a vidya or two quick before supper and what a treat this is!! So pumped for what yall get into this year. Best channel on youtube!! 🍻🇺🇸💚
Can’t wait to see the next video bill , and the falcon was a bad mother at the pad WOW !
Beautiful pic you used for the thumbnail.
The Engineering Department.🤣🤣
Once again Bill, love it and thank you!👏🏿
I love your videos no matter what type of mood you always cheer me up
Another great video. Safe travels and good testing!
Always entertaining Bill. Safe travels and hopefully no more clogged filters.
Love the content!!!! Keep it up guys!!!
Fantastic bill happy new year to you all brilliant as normal bill Jamie from Scotland
Truck looks good all leveled out.
Bill, you have the life. Your hard work is paying off large. Stay safe and have a great time.
Maybe a 9's pass? We are all waiting to see it happen.
I just heard Billy saying he wants to hit Dave Pearsons race in Delaware! We've been wanting to see you guys for years but I can't travel too far with my Neck until after my surgery. We would love meeting you and Vicki close to home. Cecil County Drag Strip is 5 miles away but I can travel to Del-Mar.
Tank looks like my air horn back in the day slinging the ol 440 Holmes boom
Mr. Bill we now need a Uncle Bucko Engineering Department shirt
Praying for safe travels, can't wait for the next video!
My guess is the speedometer cable has a tight bend in it , or something else that is causing too much resistance, or it could even be the speedometer head. It has to be one or the other.
When we installed an auxiliary tank in the bed we added a 12V 3/8” solenoid valve so when the primary tank was at a 1/4 tank we flipped the switch and let it fill the primary instead of a T
Safe travels.. looking forward to the outcome..
Love it as usual thanks again Bill look forward to seeing where this is going love the Malibu
Safe travels Bill. We’ve got our local track opening at beginning of Feb down here in Okc! And Outlaw Armageddon in July this year. Be good to have all you guys down for OA for sure! It’s a fun weekend
Great to see you guys again always looking forward to see how life is treating you guys
Sick week in February, I'd love to see the Malibu run
Man I been missin all you guys. I know you've been busy and I ain't necessarily complaining I'm just saying..... I been missin your videos. Brightens my day right up. Can't wait to see what the 421 does. High 9s????
ALWAYS GREAT CONTENT THANKS OLD MAN
When I was young lad my father bought a twin to that pick-up brand new. It also doubled as the family car. Lots of memories with that.
Bill i hope you enjoy your time here in North Carolina. The sun came out and it warned up today.
Love the content bill. Safe travels brother!!! Go get Em,!!! Crakkabarral is going to fly.
Good Luck Bill, safe travels!! Love the video, always a treat. Thank you
Need some cool pinstriping on that tank.
I would think that there is something bending the cable causing the retainer to snap off. I would look at the routing of the cable and maybe check the gauge itself.
Be sure and tell Kenny and uncle bucko to change that rubber brake line on the jeep, I've had a similar problem years ago and that line was acting like a check valve only working when the brakes were applied, not letting fluid to release back. Had me scratching my head after it did the same thing again.
The underwear idea had me rolling. 😆
Ol’ 5.0 Tussin mentioned you guys!
I’d pay to see him up there with you guys or you guys down there. Dude is a righteous man.
I have a feeling that Kenny and Bucko conversations in the shop are hilarious.
I haven’t missed a video in 3 months. I look forward to watching them
FYI. last time I had issues like that on a TH700R4 it was because I was got a gear out of a manual transmission. It looked like the right gear but it was to loose and would not hold the clip in place. Good Luck!
My son wants a nitro rc so bad, he's been working so hard in school he deserves one that's forsure. Hopefully one day soon I'll be able to afford one for him to have fun with.
Be careful on the trip south. We’ll be waiting for the next video.
Mark the Rag Man. I like it. Could be a good thing after retirement from the parts store?
Thank you for sharing.👍
Good luck Bill, safe trip. Looking forward to seeing the next video and how the Malibu ran.
Must be going to North Wilksboro or Darlington Be Safe & Have Fun
I’d definitely take one of those trucks on the shelf!! Preferably a 1967-1972 Chevy pickup or blazer!!! I’m definitely really big into those years and would definitely love a Remote controlled one for sure so that I can run it around in my 60’x80’x16’ shop!!! I could came up with an awesome track inside it!!! Awesome video buddy and remember keep up all the hard work buddy!!!!
Damn title change got me. Waiting on you bill I just knew it was coming out tonight 😂
It would be nice to compare the 750 to the 950 and see what difference it made. Good luck with everything.
Thanks again for another fun videa. Safe travels Ol Man and SAFE passes with tha Malibu.
Always love watching before I go to work....from one ohio guy to another I cant w as it for thos cold weather to end and bill i have a few questions about my jeep Cherokee XJ can you help...keep up the great work man
The Hunting Public and the Old Mans Garage in the same night?! Am I dreaming?
I hope you have a safe and productive trip. The video will be great as usual. Stay safe
Thanks for the video bill
Awesome man! Great video! Have a safe trip and best of luck!! Thanks for the video today! Always watching for the next video to come out! 😂
Good times/ testing
Have a Great Day 👍
Have a safe trip
God Bless America 🇺🇸🙏🇺🇸
Hope you went ahead and changed the break line that goes to the caliber from the hard line at the frame. It was sucking the line closed and would make the pads rub just like that
The T A trucks were my first 😆 thought when he said he had too much stuff. Knowing they ain't leaving
Hey buddy glad to see you guys again really injoy your video from last week the ole car is coming around pretty good be safe and keep on keeping on going faster God bless you and good night from Oklahoma home of the 405
As the man at work used to tell me “don’t pick up the red rag.” 😮
Down load a gps speedometer app on your phone, then you can keep up with fuel mileage and speed. I have used one on my "68 GMC for quite a while.
Drive Shaft is to long for the Six Foe. Knocking guts out of tailshaft. Or theres something inside the splined part of the yoke.
Bill, that clip with Mark blowing the dust on Mr. Happy was great🤣, always enjoy all those goofs at A1. Watch out for soiled rags😂🤣
hance
Hell yeah man, can’t wait to see it! Be careful, be safe, and have fun! 🤘🏻
Safe travels and good luck on the track. Can’t wait to see what the Malibu does. 🤜🏼👍🏼
Have a good test & tune Bill
A 10 inch wheel vs an 8 inch wheel is a world of difference in traction !